FPS 60, FPS 80, FPS 110 www.vishay.com Vishay Draloric RF Power Plate Capacitors with Flat Rim, Class 1 Ceramic FEATURES • Low losses • High reliability • Small dimensions APPLICATIONS • Industrial high frequency appliances • Medical RF equipment • Filter, bypass, and coupling circuits CAPACITANCE RANGE 100 pF to 1.0 nF CAPACITANCE TOLERANCE QUICK REFERENCE DATA DESCRIPTION ± 10 % VALUE Ceramic Class 1 Ceramic Dielectric Type Voltage (Vp) CERAMIC DIELECTRICS R42, R85 R85 R85 • R42 (TCC - 250 ppm/K) FPS 60 FPS 80 FPS 110 • R85 (TCC - 750 ppm/K) 10 000 12 000 3500 7000 6000 Min. Capacitance (pF) 500 100 1000 500 1000 RATED VOLTAGE Max. Capacitance (pF) 500 300 1000 500 1000 • 3.5 kVp Mounting Screw terminal • 6.0 kVp • 7.0 kVp MATERIAL • 10 kVp Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. • 12 kVp Connection terminals: made from copper / brass, silver plated DIELECTRIC STRENGTH TEST FINISH Capacitor body completely protective lacquered. MARKING Type designator, capacitance value and tolerance, rated peak voltage, production date code, ceramic material code, manufacturer logo ACCESSORIES ADDED Two screws and washers Revision: 14-Sep-15 200 % of rated voltage (50 Hz) DISSIPATION FACTOR Max. 0.05 % Measuring frequencies: 1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF) INSULATION RESISTANCE Min. 10 000 M (at 25 °C) OPERATING TEMPERATURE RANGE -55 °C to +100 °C Document Number: 22099 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FPS 60, FPS 80, FPS 110 www.vishay.com Vishay Draloric SAP PART NUMBER, ELECTRICAL AND DIMENSIONAL DATA WIDTH W1 mm (inches) WIDTH W2 mm (inches) 100 29 ± 1 (1.14 ± 0.04) 20 ± 1 (0.79 ± 0.04) FPS060WF20136BJ1 200 30 ± 1 (1.18 ± 0.04) 21 ± 1 (0.83 ± 0.04) FPS060WF25136BJ1 250 29 ± 1 (1.14 ± 0.04) 20 ± 1 (0.79 ± 0.04) 27 ± 1 (1.06 ± 0.04) 18 ± 1 (0.71 ± 0.04) 25 ± 1 (0.98 ± 0.04) 16 ± 1 (0.63 ± 0.04) 29 ± 3 (1.14 ± 0.12) 15 ± 3 (0.59 ± 0.12) 27 ± 3 (1.06 ± 0.12) 11 ± 3 (0.43 ± 0.12) 30 ± 3 (1.18 ± 0.12) 16 ± 3 (0.63 ± 0.12) PART NUMBER CERAMIC CAP. VALUE (pF) R42 RATED VOLTAGE (kVp) RATED POWER (kvar) (1) RATED CURRENT (ARMS) DIA. DMAX. mm (inches) TYPE FPS 60 FPS060WF10136BH1 12 10 62 (2.44) 13 R85 FPS060WF30136BJ1 300 FPS060BH50136BJ1 500 10 500 7.0 15 13 1000 3.5 15 16 1000 6 30 13 TYPE FPS 80 FPS080VY50136BJ1 86 (3.39) R85 FPS080VT10236BJ1 TYPE FPS 110 FPS110BF10236BJ1 R85 116 (4.57) Note (1) The surface temperature during operation must not exceed +100 °C DIMENSIONS in millimeters (inches) W1 D M6 Threads W2 Note • Dimensions W2 will vary depending upon capacitance value RELATED DOCUMENTS General Information Revision: 14-Sep-15 www.vishay.com/doc?22071 Document Number: 22099 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000