TOSZ 120055 www.vishay.com Vishay Draloric RF Power Barrel Capacitors for Dielectric Heating Equipment, R16 HQ Ceramic Dielectric FEATURES These capacitors feature a Q-factor of greater than 10 000 which makes them ideal in operating frequency range from 10 MHz up to 25 MHz where high voltages and currents are present. The TOSZ model can be used as replacement for fixed vacuum capacitors. The construction gives the capacitors an advantage over fixed vacuum capacitors, because there is no possibility of vacuum deterioration. APPLICATIONS Dielectric heating equipments in industrial segment CAPACITANCE RANGE 160 pF to 250 pF CAPACITANCE TOLERANCE QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type R16 HQ TOSZ 120055 Voltage (Vp) 9000 Min. Capacitance (pF) 160 Max. Capacitance (pF) 250 Mounting Screw terminal ± 10 % CERAMIC DIELECTRICS R16 High Q (TCC + 100 ppm/K) RATED VOLTAGE 9 kVp DIELECTRIC STRENGTH TEST MATERIAL 150 % rated voltage (12 700 VRMS, 50 Hz, 5 minutes) Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. RF POWER TEST Connection terminals: thread terminal, copper / brass, silver plated. 100 % of rated power, for 5 minutes in a test generator circuit DISSIPATION FACTOR Allowable torque: 3.5 Nm (31 lbf in) Max. 0.025 % (1 MHz) FINISH INSULATION RESISTANCE Capacitor body completely glazed. MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo, serial no. Revision: 11-Sep-15 Min. 100 000 M (at 25 °C) OPERATING TEMPERATURE RANGE -55 °C to +100 °C Document Number: 22138 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TOSZ 120055 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC BZ120055WC16136CB1 R16 High Q BZ120055WC25136CB1 CAP. VALUES (pF) RATED VOLTAGE (kVp) RATED POWER (1) (kvar) RATED CURRENT (ARMS) 9.0 Up to 862 135 160 250 Note (1) The surface temperature during operation must not exceed +100 °C DIMENSIONS in millimeters (inches) Ø 126 (4.96 Dia.) 57.0 ± 1.5 (2.244 ± 0.060) 45.0 ± 0.3 (1.772± 0.012) 60° 60° M5 threads DERATING DIAGRAM BZ120055WC16136CB1 21.1 MHz Ug (kVp) 100 Ug 10 100 10 10 1 Ug 100 10 Ig Ig 0.1 0.1 Ig (ARMS) Qg (kvar) 1000 13.5 MHz Ug (kVp) 100 Qg Qg 1 BZ120055WC25136CB1 Ig (ARMS) Qg (kvar) 1000 1 10 Frequency (MHz) 100 1 1000 0.1 0.1 1 10 100 1 1000 Frequency (MHz) RELATED DOCUMENTS General Information Revision: 11-Sep-15 www.vishay.com/doc?22071 Document Number: 22138 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000