High-Frequency Center Probe Test Socket for Devices up to 27mm Square FEATURES •Aries unique universal socketing system allows the socket to be easily configured for any package, on any pitch (or multiple pitch) from 0.2mm or greater, in any configuration, with little or no tooling charge or extra lead-time. •For Test & Burn-In of CSP, µBGA, Bump-Array, QFN, QFP, MLF, DFN, SSOP, TSSOP, TSOP, SOP, SOIC, LGA, LCC, PLCC, TO and any SMT package style made. Also can be compatible with PGA packaged devices. •Quick and easy Probe Replacement System: the complete set of probes can be removed and a new set (interposer) can be inserted quickly and easily. The old set can be returned to the factory for repair and sent back within one day. •Pressure mounting, no soldering required. •4-point crown insures “scrub” on solder balls, raised tip provides “scrub” on pads. ORDERING INFORMATION •Signal path during test only 0.077 [1.96]. Consult Factory •Accommodates any package up to 27mm square. •Small overall socket size/profile allows max. number of sockets per BIB and BIBs CLEANING, HANDLING, MOUNTING per oven, while being operator-friendly. GENERAL SPECIFICATIONS •MOLDED SOCKET COMPONENTS: UL94V-0 PEEK and/or Ultem •PIN INDUCTANCE: 0.51nH (large probe) •CONTACT RESISTANCE: <40 mΩ •1dB BANDWIDTH to 10.1GHz (0.80mm pitch) (large probe) •ESTIMATED CONTACT LIFE: 500,000 cycles •COMPRESSION SPRING PROBES: heat-treated BeCu with 30µ [0.75µ] min. Au per MilG-45204 over 30µ [0.75µ] min.] Ni per SAE-AMS-QQ-N-290 •CONTACT FORCE: 6g per contact on 0.20-0.29mm pitch : 15g per contact on 0.30-0.35mm pitch : 16g per contact on 0.40-0.45mm pitch : 25g per contact on 0.50-0.75mm pitch : 25g per contact on 0.80mm pitch or larger •OPERATING TEMPERATURE: -55°C [-67°F] min. to 150°C [302°F] max. •ALL HARDWARE: Stainless Steel & PROBE REPLACEMENT INFO MOUNTING CONSIDERATIONS •SOCKET: mounted with four #4-40 screws (to be removed at time of socket mounted to PCB) or a tapped, insulated backing plate to be used on underside of PCB for high pin count applications •NOTE: Sockets must be handled with care when mounting or removing sockets to/from PCB •TEST PCB MINIMUM DIAMETER “G”: 0.025 [0.64] (large probe 0.80mm pitch and larger) : 0.015 [0.38] (small probe 0.50-0.75mm pitch) : 0.012 [0.31] (small probe 0.40-0.45mm pitch) : 0.009 [0.23] (small probe 0.30-0.35mm pitch) : 0.004 [0.10] (small probe 0.20-0.20mm pitch) •TEST PCB DIAMETER SPRING PROBE PAD PLATING: 30µ [0.75µ] min. Au per MIL-G-45204 over 30µ [0.75µ] min. Ni per SEA-AMS-QQ-N-290. Pad must be the same height as top surface of PCB. Please refer to the Custom Socket Drawing supplied by Aries after receipt of your order for your specific application. •Some applications may require a Backup Plate. See drawing for more information. A detailed device drawing must be sent to Aries to quote and design a socket. __________________________ See Data Sheet for... CSP Sockets 23016 Hybrid Socket 23021 µBGA up to 6.5mm 23017 µBGA up to 13mm 23018 µBGA up to 27mm 23018-APP w/Adj Pressure Pad 23019 µBGA up to 40mm 23020 µBGA up to 55mm 23023 Optical Failure Analysis RF Sockets 24013 RF up to 6.5mm 24008 RF up to 13mm 24009-APP w/Adj Pressure Pad 24011 RF up to 40mm 24012 RF up to 55mm 24010 RF Machined Socket 23022 Kelvin Test Socket Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 24009 1 of 2 Rev. 1.5 High-Frequency Center Probe Test Socket for Devices up to 27mm Square FULL-ARRAY SHOWN AS AN EXAMPLE; YOUR SPECIFIC DEVICE PATTERN/FOOTPRINT WILL BE SUPPLIED WHEN ORDERED. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. SPRING PROBES Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 24009 2 of 2 Rev. 1.5