CSP Test Socket for Optical Laser Failure Analysis w/Emission Microscopy* Available with or without filters for UV, infrared and full spectrum applications, this optical test socket is ideal for testing an optical sensor type chip and for EMMI testing a standard chip using an infrared head sensor. The optical test socket line can accommodate many different optical window and lens materials, including glass, sapphire, and plastic depending on operational requirements. The standard optical grade window on the 24XXX socket uses a high-quality quartz V077 glass with a 98% transmission rate from <260nm in the UV to >2000nm in the infrared. FEATURES •Aries unique universal socketing system allows the socket to be easily configured for any package, on any pitch (or multiple pitch) from 0.2mm or greater, in any configuration, with little or no tooling charge or extra lead-time. •For Test & Burn-In of CSP, µBGA, Bump-Array, QFN, QFP, MLF, DFN, SSOP, TSSOP, TSOP, SOP, SOIC, LGA, LCC, PLCC, TO and any SMT package style made. Also can be compatible with PGA packaged devices. •Quick and easy Probe Replacement System: the complete set of probes can be removed and a new set (interposer) can be inserted quickly and easily. The old set can be returned to the factory for repair and sent back within one day. •Socket lid nests device into socket for a reliable connection. •ZIF style socket using Aries solderless, Au-plated pressure mount Spring-Probe. •Special lid designs and/or materials can be quoted. •Socket easily located, mounted & removed from PCB. •Signal path during test only 0.077 [1.96]. •Available with Spring-Probes or Kapton Elastomer Interposer. •4-point crown insures “scrub” on solder oxides. Consult factory for other available probe styles. •The Au over Ni-plated compression Spring-Probes leave very small witness marks on the bottom surface of the device solder balls. GENERAL SPECIFICATIONS •BODY MATERIAL: Ultem® or Torlon® EMMI images showing •1dB BANDWIDTH: 18.5 GHz, <3dB to 39.7 GHz (0.50mm pitch) (large probe) light emission from failed •ESTIMATED CONTACT LIFE: 500,000 cycles devices at several loca •COMPRESSION SPRING PROBES: heat-treated BeCu with 30µ [0.75µ] min. Au per MIL-G-45204 tions (front side top) over 30µ [0.75µ] min. Ni per SAE AMS-QQ-N-290 •CONTACT FORCE: 6g per contact on 0.20-0.29mm pitch : 15g per contact on 0.30-0.35mm pitch ORDERING INFORMATION : 16g per contact on 0.40-0.45mm pitch Consult Factory : 25g per contact on 0.50-0.75mm pitch : 25g per contact on 0.80mm pitch or larger CLEANING, HANDLING, MOUNTING •SCREWS AND ALIGNMENT PINS: Stainless Steel & PROBE REPLACEMENT INFO •INSERTS: Brass per QQ-B-626 •OPERATING TEMPERATURE RANGE: -55ºC to 150ºC [-67º to 302º] MOUNTING CONSIDERATIONS •NOTE: Sockets must be handled with care when mounting or removing sockets to/from PCB •TEST PCB MINIMUM DIAMETER “P”: 0.025 [0.64] (large probe 0.80mm pitch and larger) : 0.015 [0.38] (small probe 0.50-0.75mm pitch) : 0.012 [0.31] (small probe 0.40-0.45mm pitch) : 0.009 [0.23] (small probe 0.30-0.35mm pitch) : 0.004 [0.10] (small probe 0.20-0.20mm pitch) •TEST PCB DIAMETER SPRING PROBE PAD & KIP PLATING: 30µ [0.75µ] min. Au per MIL-G-45204 over 30µ [0.75µ] min. Ni per SEA AMS-QQ-N-290. Pad must be the same height as top surface of PCB. Please refer to the Custom Socket Drawing supplied by Aries after receipt of your order for your specific application. Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 24014 1 of 3 Rev. 1.2 CSP Test Socket for Optical Laser Failure Analysis w/Emission Microscopy* ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY for DIM. “A” - “K” CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. FULL-ARRAY SHOWN AS AN EXAMPLE; YOUR SPECIFIC DEVICE PATTERN/FOOTPRINT WILL BE SUPPLIED WHEN ORDERED. * Emission Microscopy (EMMI) is a powerful early-stage noninvasive failure analysis technique localizing failures and requiring little sample preparation. Flip-chip devices, difficult to study by other means, are easily studied through the die without decapsulation and often without thinning, making it an efficient optical analysis technique that will detect and localize certain integrated circuit failures. It can be performed from either the front or back sides of devices. Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 24014 2 of 3 Rev. 1.2 CSP Test Socket for Optical Laser Failure Analysis w/Emission Microscopy* A detailed device drawing must be sent to Aries to quote and design a socket. __________________________ See Data Sheet for... CSP Sockets 23016 Hybrid Socket 23021 µBGA up to 6.5mm 23017 µBGA up to 13mm 23018 µBGA up to 27mm 23018-APP w/Adj Pressure Pad 23019 µBGA up to 40mm 23020 µBGA up to 55mm SPRING PROBES RF Sockets 24013 RF up to 6.5mm 24008 RF up to 13mm 24009 RF up to 27mm 24009-APP w/Adj Pressure Pad 24011 RF up to 40mm 24012 RF up to 55mm 24010 RF Machined Socket 23022 Kelvin Test Socket Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 24014 3 of 3 Rev. 1.2