High-Temp PGA ZIF Test & Burn-in Socket for Footprints on Std 8x8 to 21x21 Grid FEATURES • Strong Metal Cam Activates Normally-closed Contacts, Preventing Dependency on Plastic for Contact Force • Handle mounted on Right- or Left-hand Side • Any Footprint Accepted on Standard 8x8 to 21x21 Grid GENERAL SPECIFICATIONS • SOCKET BODY: black UL 94V-0 Polyphenylene Sulfide (PPS) • CONTACTS: Spinodal • CONTACT PLATING: 50μ [1.27μ] min. NiB • HANDLE: Stainless Steel • CONTACT CURRENT RATING: 1 amp • OPERATING TEMPERATURES: -85°F to 392°F [-65°C to 200°C] • ACCEPTS LEADS: 0.014-0.026 [0.36-0.66] dia., 0.120-0.290 [3.05-7.37] long ORDERING INFORMATION MOUNTING CONSIDERATIONS XXX-PXX XXXXX-1 X • SUGGESTED PCB HOLE SIZE: 0.032 ±0.002 [0.81 ±0.05] dia. • See PCB FOOTPRINT below • Plugs into standard PGA sockets Plating 6 = NiB Consult Factory for Minimum Order Availability Solder Pin Tail Grid Size No. of Pins Dim. “C” 8x8* 64 0.700 [17.78] 9x9 81 0.800 [20.32] 12 x 12 * 144 1.100 [27.94] 13 x 13 169 1.200 [30.48] 14 x 14 * 196 1.300 [33.02] 15 x 15 225 1.400 [35.56] 16 x 16 * 256 1.500 [38.10] 17 x 17 289 1.600 [40.64] 18 x 18 * 324 1.700 [43.18] 19 x 19 361 1.800 [45.72] 20 x 20 * 400 1.900 [48.26] 21 x 21 441 2.000 [50.80] Dim. “A” Dim. “B” Dim. “D” 1.695 [43.05] 1.110 [28.19] 1.275 [32.39] 1.894 [48.10] 1.510 [38.35] 1.675 [42.55] 2.094 [53.20] 1.710 [43.43] 1.875 [47.63] 2.294 [58.27] 1.910 [48.51] 2.075 [52.71] 2.494 [63.35] 2.110 [53.59] 2.275 [57.79] 2.694 [68.43] 2.310 [58.67] 2.475 [62.87] Grid Size & Footprint Number Series Designator PRS = Handle Right – Std PLS = Handle Left Number of Pins * Top- and Right-hand Side Rows left out ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED SPECIAL HANDLE REQUIREMENTS: CONSULT FACTORY CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 10004HT Rev. 1.1 1 of 2 High-Temp PGA ZIF Test & Burn-in Socket for Any Footprint on Std 8x8 to 21x21 Grid SPECIAL FOOTPRINT INSTRUCTIONS 1. Make a copy of this worksheet 2. Fill-in circles for footprint desired using the key below 3. Fill-in the information below. See Ordering Information above 4. Send worksheet to Aries for prompt quote TOP VIEW X W V U T S R P N M L K J H G F E D C B A KEY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED SPECIAL HANDLE REQUIREMENTS: CONSULT FACTORY CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS =no pin =pin X =plug hole COMPANY NAME ____________________________________ ADDRESS _________________________________________ CITY _____________________________________________ REQUESTED BY _____________________________________ PHONE ___________________________________________ DATE ____________________________________________ TOTAL NUMBER OF PINS ______________________________ SERIES (circle one): PRS (Right handle - std) PLS (Left handle) CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 10004HT Rev. 1.1 2 of 2