440L Series www.vishay.com Vishay Cera-Mite AC Line Rated Ceramic Disc Capacitors Class X1, 760 VAC / Class Y1, 500 VAC FEATURES • Complies with IEC 60384-14, 4th edition • High reliability • Radial leads • High capacitance up to 20 nF • Singlelayer AC disc safety capacitors • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • X1, Y1 according to IEC 60384-14.4 • Across-the-line QUICK REFERENCE DATA DESCRIPTION Ceramic Class Ceramic Dielectric Voltage (VAC) • Line by-pass VALUE • Antenna coupling 1 C0G, U2J, P3K, R3L 500 Min. Capacitance (pF) 10 Max. Capacitance (pF) 47 Mounting 2 DESIGN C0G, U2J, P3K, R3L X7R, Y5U 760 500 X7R, Y5U 760 68 20 000 Radial The capacitors consist of a ceramic disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm). The capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm). The standard tolerances are ± 10 % or ± 20 %. Coating is made of flame-retardant epoxy resin in accordance with “UL 94 V-0.” INSULATION RESISTANCE Min. 1000 F CAPACITANCE RANGE 10 pF to 20 nF TOLERANCE ON CAPACITANCE ± 10 %; ± 20 % RATED VOLTAGE IEC 60384-14.4: DISSIPATION FACTOR • X1: 760 VAC, 50 Hz 2.0 % max. at 1 kHz; 1 V • Y1: 500 VAC, 50 Hz CERAMIC DIELECTRIC DIELECTRIC STRENGTH BETWEEN LEADS C0G, U2J, P3K, R3L (class 1) X7R, Y5U (class 2) Component test: 4000 VAC, 50 Hz, 2 s OPERATING TEMPERATURE RANGE As repeated test admissible only once with: 3600 VAC, 50 Hz, 2 s -30 °C to +125 °C CLIMATIC CATEGORY ACC. TO EN 60068-1 25/125/21 Random sampling test (destructive test): 4000 VAC, 50 Hz, 60 s DIELECTRIC STRENGTH OF BODY INSULATION 4000 VAC, 50 Hz, 60 s (destructive test) Revision: 17-Jun-16 Document Number: 23102 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 440L Series www.vishay.com Vishay Cera-Mite DIMENSIONS in inches (millimeters) 440LS20-R 1.250 min. (32) Dmax. D max. LS Tinned Copper Leads T max. 0.125 max. (3.2) LO Ø LS 1.625 ± 0.125 (41.3 ± 3.2) Tmax. 0.125 max. (3.2) ORDERING INFORMATION, CERAMIC X1 / Y1 CAPACITORS 440L C (pF) C0G 10 U2J 15 P3K 22 R3L 33 47 X7R 68 100 150 220 330 Y5U 470 560 680 1000 1500 2000 2200 2700 2800 3000 3200 3300 3900 4000 4700 5000 5500 5600 6800 8000 9000 10 000 20 000 WIRE SIZE LS LEAD SPACE INCH (mm) ± 1 mm LO LEAD OFFSET INCH (mm) ± 0.5 mm ORDERING CODE 0.032 (0.81) 0.375 (9.5) 0.098 (2.5) 440LQ10-R 20 0.032 (0.81) 0.375 (9.5) 0.110 (2.8) 440LQ15-R 0.190 (4.8) 20 0.032 (0.81) 0.375 (9.5) 0.094 (2.4) 440LQ22-R 0.330 (8.4) 0.330 (8.4) 0.200 (5.1) 0.180 (4.6) 20 20 0.032 (0.81) 0.032 (0.81) 0.375 (9.5) 0.375 (9.5) 0.102 (2.6) 0.083 (2.1) 440LQ33-R 440LQ47-R ± 10 0.330 (8.4) 0.220 (5.6) 0.220 (5.6) 0.235 (6.0) 0.235 (6.0) 0.225 (5.7) 0.375 (9.5) 0.122 (3.1) 0.122 (3.1) 0.138 (3.5) 0.138 (3.5) 0.126 (3.2) 440LQ68-R 440LT10-R 440LT15-R 440LT22-R 440LT33-R ± 20 0.330 (8.4) 0.330 (8.4) 0.330 (8.4) 0.365 (9.3) 0.365 (9.3) 0.400 (10.2) 0.430 (10.9) 0.460 (11.7) 0.460 (11.7) 0.490 (12.4) 0.490 (12.4) 0.490 (10.9) 0.530 (13.5) 0.530 (13.5) 0.620 (15.7) 0.620 (15.7) 0.680 (17.3) 0.680 (17.3) 0.720 (18.3) 0.720 (18.3) 0.790 (20.1) 0.850 (21.6) 0.850 (21.6) 0.230 (5.8) 0.230 (5.8) 0.235 (6.0) 0.225 (5.7) 0.220 (5.6) 0.220 (5.6) 0.225 (5.7) 0.225 (5.7) 0.220 (5.6) 0.225 (5.7) 0.220 (5.6) 0.220 (5.6) 0.220 (5.6) 0.220 (5.6) 0.230 (5.8) 0.225 (5.7) 0.230 (5.8) 0.230 (5.8) 0.235 (6.0) 0.220 (5.6) 0.225 (5.7) 0.230 (5.8) 0.355 (9.0) 0.375 (9.5) 0.130 (3.3) 0.130 (3.3) 0.138 (3.5) 0.126 (3.2) 0.118 (3.0) 0.118 (3.0) 0.126 (3.2) 0.126 (3.2) 0.122 (3.1) 0.126 (3.2) 0.122 (3.1) 0.122 (3.1) 0.118 (3.0) 0.122 (3.1) 0.130 (3.3) 0.126 (3.2) 0.134 (3.4) 0.134 (3.4) 0.138 (3.5) 0.122 (3.1) 0.126 (3.2) 0.134 (3.4) 0.134 (3.4) 440LT47-R 440LT56-R 440LT68-R 440LD10-R 440LD15-R 440LD20-R 440LD22-R 440LD27-R 440LD28-R 440LD30-R 440LD32-R 440LD33-R 440LD39-R 440LD40-R 440LD47-R 440LD50-R 440LD55-R 440LD56-R 440LD68-R 440LD80-R 440LD90-R 440LS10-R 440LS20-R TOL. (%) Dmax. DIAMETER INCH (mm) Tmax. THICKNESS INCH (mm) AWG INCH (mm) ± 10 0.330 (8.4) 0.195 (5.0) 20 ± 10 0.330 (8.4) 0.210 (5.3) ± 10 0.330 (8.4) ± 10 ± 10 20 20 0.032 (0.81) 0.032 (0.81) Notes • Alternate lead spacings are available bulk or tape and reel on request. • Minimum lead clearance according to IEC 60384-14: 0.315" (8 mm) TAPE AND REEL OPTIONS Part number codes and specifications for tape and reel packaging are found in the general information document - find web-link below. Revision: 17-Jun-16 Document Number: 23102 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 440L Series www.vishay.com Vishay Cera-Mite LEAKAGE CURRENT VS. VOLTAGE (Typical) INSERTION LOSS VS. FREQUENCY (Typical) 1 2 80 440LQ47-R 60 440LQ33-R 40 440LQ22-R 440LQ15-R 20 Insertion Loss (dB) Leakage Current (µA) RMS 100 440LQ10-R 0 0 1000 2000 3000 3 4 5 10 20 30 40 50 100 10 4000 100 10 0.9 0.8 0.7 440LT68-R 0.6 440LT56-R 0.5 440LT47-R 0.4 440LT33-R 0.3 440LT22-R 0.2 Insertion Loss (dB) Leakage Current (mA) RMS 1 20 30 40 50 440LT15-R 440LT10-R 440LQ68-R 0.1 0 0 1000 2000 3000 100 10 4000 440LQ68-R 440LT10-R 440LT15-R 440LT22-R 440LT68-R 440LT56-R 440LT47-R 440LT33-R 100 1000 Frequency (MHz) AC Voltage (V) RMS 3 10 2.5 440LD32-R 440LD30-R 440LD28-R 440LD27-R 2 440LD22-R 440LD20-R 1.5 440LD15-R 1 440LD10-R 0.5 440LT68-R 440LT56-R 440LT47-R Insertion Loss (dB) Leakage Current (mA) RMS 1000 Frequency (MHz) AC Voltage (V) RMS 0 0 500 1000 1500 2000 2500 3000 3500 20 30 40 50 100 0.1 4000 440LD10-R 440LD15-R 440LD20-R 440LD22-R 440LD32-R 440LD30-R 440LD28-R 440LD27-R 1 10 100 Frequency (MHz) AC Voltage (V) RMS 16 10 440LS20-R 50 Hz, 22 °C 14 12 10 8 440LS10-R 6 440LD80-R 440LD68-R 440LD56-R 440LD47-R 440LD39-R 440LD30-R 4 2 0 0 500 1000 1500 2000 2500 AC Voltage (V) RMS Revision: 17-Jun-16 3000 3500 4000 Insertion Loss (dB) Leakage Current (mA) RMS 440LQ10-R 440LQ15-R 440LQ22-R 440LQ47-R 440LQ33-R 20 30 40 50 60 70 80 90 100 0.01 440LD33-R 440LD39-R 440LD40-R 440LD47-R 440LD50-R 440LD55-R 440LD56-R 440LD68-R 440LD80-R 440LD90-R 440LS10-R 0.1 1 10 Frequency (MHz) Document Number: 23102 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 440L Series www.vishay.com Vishay Cera-Mite APPROVALS IEC 60384-14.4 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y1-capacitor: CB test certificate: DE1-56450/A1 10 pF to 20 nF 500 VAC X1-capacitor: CB test certificate: DE1-56450/A1 10 pF to 20 nF 760 VAC VDE Y1-capacitor: VDE marks approval: 40003985 10 pF to 20 nF 500 VAC X1-capacitor: VDE marks approval: 40003985 10 pF to 20 nF 400 VAC Y1-capacitor: UL test certificate: E99264 10 pF to 20 nF 500 VAC X1-capacitor: UL test certificate: E99264 10 pF to 20 nF 760 VAC DIN EN 60384-14 VDE 0565-1-1:2006-04 - Safety tests Underwriters Laboratories Inc. UL 60384-14, CSA E60384-1:03, CSA E60384-14:09 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. MARKING Samples 10 pF to 10 nF 272M 20 nF CM 440L 203M 440L IEC 60384-14 125 °C Y1 500 ~ X1 400 ~ CM Y1 500 ~ X1 760 ~ RELATED DOCUMENTS General Information www.vishay.com/doc?23140 CB Test Certificate www.vishay.com/doc?22237 VDE Marks Approval www.vishay.com/doc?22238 UL Test Certificate www.vishay.com/doc?22239 Revision: 17-Jun-16 Document Number: 23102 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000