www.hamlin.com File E61760(N) 59135 High Temperature Flange Mount Features and Benefits 57135 Actuator Features Benefits Applications • 2 part magnetically operated proximity sensor • High temperature rated • Cross-slotted mounting holes for optimum adjustability • Standard, high voltage or change over contacts • Customer defined sensitivity • Choice of cable length and connector • No standby power requirement • Operates through non-ferrous materials such as wood, plastic or aluminium • Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination • Simple installation and adjustment • • • • 59135 Sensor Position and limit sensing Security system switch Linear actuators Door switch DIMENSIONS (in) mm CUSTOMER OPTIONS - Switching Specifications TABLE 1 Contact Type Form A Normally Open Normally Open High Voltage Change Over Normally Closed Power Watt - max. 1 2 3 4 10 10 5 Voltage Switching Vdc - max. 5 200 300 175 175 Breakdown Current Switching Vdc - min. 250 450 200 200 A - max. 0.5 0.5 0.25 0.25 Resistance Carry A - max. 1.2 1.5 1.5 1.5 Contact, Initial Ω - max. 0.2 0.2 0.2 0.2 Insulation Ω - min. 1010 1010 109 109 pF - typ. 0.3 0.2 0.3 0.3 °C -40 to +150 -20 to +150 -40 to +150 -40 to +150 Switch Type Capacitance Contact Temperature Operating Storage °C -65 to +150 -65 to +150 -65 to +150 -65 to +150 Time Operate ms - max. 1.0 1.0 3.0 3.0 Release ms - max. 1.0 1.0 3.0 3.0 Shock 11ms 1⁄2 sine G - max. 100 100 50 50 Vibration 50-2000 Hz G - max. 30 30 30 30 CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 2 TABLE 3 TABLE 4 Termination Options:- D Cable Type:- Sensitivity Options:Activate Distances are approximate using Hamlin 57135 actuator as illustrated Switch AT before modification Select Option Switch Type 1 2 3 4 20 AWG 19/32 FEP UL1130/UL1332 S Pull In AT Range Normally Open 12-18 High Voltage Change Over 15-20 Normally Closed T Activate Distance d (in) mm (.748) 19,0 (.650) 16,5 SELECT OPTION Standard Lengths Pull In AT Range 17-23 20-25 U Activate Distance d (in) mm (.709) 18,0 (.591) 15,0 Pull In AT Range 22-28 25-30 Activate Distance d (in) mm (.630) 16,0 (.531) 13,5 SELECT OPTION CABLE LENGTH 01 (3,94) 100 02 (11,81) 300 03 (19,69) 500 04 (29,53) 750 05 (39,37) 1000 (in) V Pull In AT Range 27-33 Activate Distance d (in) mm (.591) 15,0 mm DESCRIPTION (2 WIRE VERSIONS ILLUSTRATED) A or F Tinned or untinned leads B Crimped terminals C 6.35mm fastons D AMP MTE 2.54mm pitch E JST XHP 2.5mm pitch ORDERING INFORMATION N.B. 57135 actuator sold separately Series 59135 Switch Type Sensitivity Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: 59036 59135 Cable Length Table 1 Table 2 Table 3 Termination Table 4 +1 920 648 3000 • Fax: +1 920 648 3001 • Email: [email protected] +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: [email protected] +49 (0) 6181 953660 • Fax: +49 (0) 6181 9536666 • Email: [email protected] +33 (0) 1 4687 0202 • Fax: +33 (0) 1 4686 6786 • Email: [email protected] ISSUE No: 4 DATE: 1/5/3 34 X X XX X DETAILS PROVIDED ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.