EC www.vishay.com Vishay ESTA High Voltage DC Filter Capacitors TYPE DESCRIPTION PART NUMBER TYPE EC The EC range of capacitors are similar in design to the ET range but are housed in a more robust container. They are manufactured using a mixed dielectric material that consists of polyester / polypropylene film and capacitor tissue. They are impregnated and filled with a mineral oil. The container is a Synthetic Resin Bonded Paper (SRBP) tube sealed at both ends with resin assuring a hermetic seal. The capacitors may be used in air, oil or SF6. They are terminated with M6 studs x 15 mm long or tinned copper wire. Note • The impregnant used is a non toxic highly purified and inhibited mineral oil APPLICATIONS The EC range of capacitors are specifically designed for high voltage filters and can be successfully used in the following applications: • High voltage smoothing • Induction heating • RT transmitter power supplies • X-ray power supplies TEMPERATURE RANGE Temperature range is -40 °C to +85 °C. Derating is required for operation at higher temperatures. TEMPERATURE COEFFICIENT Capacitance will increase by 2 % per 100 °C temperature rise. CAPACITANCE RANGE 0.001 μF to 2 μF. The tolerance is ± 10 %. Other tolerance are available on request. Normal values measured at 1 kHz. VOLTAGE RANGE 10 kV EC100-104 EC100-254 EC100-504 20 kV EC200-503 EC200-104 EC200-254 EC200-504 30 kV EC300-253 EC300-503 EC300-104 EC300-254 40 kV EC400-253 EC400-503 EC400-104 EC400-124 50 kV EC500-103 EC500-253 EC500-503 EC500-104 60 kV EC600-502 EC600-103 EC600-253 EC600-503 EC600-104 80 kV EC800-502 EC800-103 EC800-253 EC800-503 100 kV EC1000-502 EC1000-103 EC1000-253 120 kV EC1200-502 CAP. [μF] L [mm] D [mm] 0.1 0.25 0.5 115 140 205 65 75 95 0.05 0.1 0.25 0.5 180 230 280 360 65 65 75 95 0.025 0.05 0.1 0.25 245 320 395 510 65 65 65 75 0.025 0.05 0.1 0.12 305 410 345 440 65 65 95 95 0.01 0.025 0.05 0.1 270 335 430 430 65 65 75 95 0.005 0.01 0.025 0.05 0.1 310 310 390 500 615 65 75 75 75 95 0.005 0.01 0.025 0.05 400 400 500 650 65 75 95 95 0.005 0.01 0.025 485 485 610 65 75 95 0.005 425 75 DIMENSIONS in millimeters 1000 VDC to 100 000 VDC L TEST VOLTAGE Terminal/terminal (Vt/t) For DC rating < 20 kV Vt/t = 2.0 x rated voltage 60 s For DC rating > 20 kV Vt/t = 1.5 x rated voltage 60 s Revision: 23-Nov-15 15 D 15 5 Document Number: 13015 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000