MKP 422 Vishay BCcomponents Metallized Polypropylene Filter Film Capacitors MKP Radial Potted Type for Surge Voltage Applications FEATURES 168x12(halfpage) 7.5 and 10 mm lead pitch. Supplied loose in box and ammopack. Withstand surge voltages up to 1.5 kV. w l e3 Lead (Pb)-free product RoHS-compliant product RoHS h COMPLIANT CAPACITANCE TOLERANCE ± 5 %; ± 2 % lt RATED (DC) VOLTAGE Ødt P±0.3 Dimensions in mm 630 V RATED (AC) VOLTAGE 160 V APPLICATIONS Low losses due to low contact resistance and low loss dielectric result in applications where high frequency occur or high stability is preferred. Their small dimensions make them suitable for circuits with high packaging density. RATED PEAK-TO-PEAK VOLTAGE 450 V CLIMATIC CATEGORY MARKING 55/085/56 C-value; rated voltage; tolerance; code for manufacturer; year and week of manufacture; manufacturers type designation RATED TEMPERATURE (DC) 85 °C DIELECTRIC RATED TEMPERATURE (AC) Polypropylene film 85 °C ELECTRODES MAXIMUM APPLICATION TEMPERATURE Vacuum deposited aluminum 85 °C ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) REFERENCE SPECIFICATIONS CONSTRUCTION PERFORMANCE GRADE Wound mono construction Grade 1 (long life) LEADS STABILITY GRADE Tinned wire Grade 1 CAPACITANCE RANGE (E24 SERIES) DETAIL SPECIFICATION 0.001 to 0.047 µF For more detailed data and test requirements contact: [email protected] www.vishay.com 286 IEC 60384-16 For technical questions contact: [email protected] Document Number: 28151 Revision: 21-Nov-05 MKP 422 Metallized Polypropylene Filter Film Capacitors Vishay BCcomponents MKP Radial Potted Type for Surge Voltage Applications COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 7.5 mm 422 10.0 mm CAPACITANCE 0.01 2 0.1 3 (numerically) Example: 103 = 100 x 1 = 100 nF 2222 422 BFC2* 422 XX XX X XX XX X * Use this partnumber for those with access to the Vishay’s SAP system and Partners website within the Americas PREFERRED TYPES TYPE PACKAGING LEAD CONFIGURATION C-TOL 422 Ammopack H = 18.5 mm; P0 = 12.7 mm 630 V ±2% 1 ON REQUEST Ammopack 422 Loose in box H = 18.5 mm; P0 = 12.7 mm lead length 4.0 +1.0/−0.5 mm ±5% 0 ±5% 3 ±2% 4 SPECIFIC REFERENCE DATA DESCRIPTION Tangent of loss angle: C ≤ 0.0047 µF VALUE at 10 kHz at 100 kHz ≤ 5 × 10−4 ≤ 15 × 10−4 Rated voltage pulse slope (dU/dt)R at 630 V (DC) 50 V/µs > 100000 MΩ R between leads at 500 V; 1 minute R between interconnected leads and case at 500 V; 1 minute > 100000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1000 V; 1 minute Withstanding (DC) voltage between leads and case 2840 V; 1 minute Document Number: 28151 Revision: 21-Nov-05 For technical questions contact: [email protected] www.vishay.com 287 MKP 422 Vishay BCcomponents Metallized Polypropylene Filter Film Capacitors MKP Radial Potted Type for Surge Voltage Applications URdc = 630 V; URac = 160 V; Up-p = 450 V CATALOGUE NUMBER AND PACKAGING C (E 24) (µF) DIMENSIONS b×h×l (mm) MASS (g) AMMOPACK LOOSE IN BOX H = 18.5 mm lt = 4.0 + 1.0/− 0.5 mm C-tol = ± 2 % last 5 digits of catalog number SPQ SPQ 1250 1500 1000 1000 750 750 750 1000 600 1000 500 750 Pitch = 7.5 ± 0.4 mm; dt = 0.50 ± 0.05 mm 0.001 11002 0.0011 11102 0.0012 11202 0.0013 11302 0.0015 0.0016 11502 4.0 × 9.0 × 10.0 0.50 11602 0.0018 11802 0.002 12002 0.0022 12202 0.0024 12402 0.0027 12702 0.003 13002 0.0033 13302 0.0036 5.0 × 10.5 × 10.0 0.90 0.0039 0.0043 0.0047 13602 13902 6.0 × 11.5 × 10.0 1.0 14302 14702 Pitch = 10.0 ± 0.4 mm; dt = 0.60 ± 0.06 mm 0.0051 15102 0.0056 15602 0.0062 16202 0.0068 16802 0.0075 17502 0.0082 18202 0.01 4.0 × 10.0 × 12.5 0.60 0.011 11003 11103 0.012 11203 0.013 11303 0.015 11503 0.016 11603 0.018 11803 0.02 12003 0.022 5.0 × 11.0 × 12.5 0.85 0.024 12203 12403 0.027 12703 0.03 13003 0.033 0.036 13303 6.0 × 12.0 × 12.5 1.10 13603 0.039 13903 0.043 14303 0.047 14703 www.vishay.com 288 For technical questions contact: [email protected] Document Number: 28151 Revision: 21-Nov-05 MKP 422 Metallized Polypropylene Filter Film Capacitors Vishay BCcomponents MKP Radial Potted Type for Surge Voltage Applications MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 3 AC voltage (V) 10 10 2 47 10 1 22 0 n nF F nF 1 10 0 3 10 10 4 10 5 10 6 f (Hz) 10 7 CAPACITANCE ∆C/C (%) 2 0 max. typical -2 min. -40 0 40 Tamb (°C) 80 IMPEDANCE 2 Impedance (Ω) 10 10 0 10-1 10 nF 100 nF 10 -2 1.0 µF -3 10 4 10 10 5 Document Number: 28151 Revision: 21-Nov-05 10 6 10 7 f (Hz) 8 10 For technical questions contact: [email protected] www.vishay.com 289 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000