735D, 735DE, CT79 (CECC 30202) Datasheet

735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
Wet Tantalum Capacitors Tantalum Case with Glass-to-Tantalum
Hermetic Seal CECC 30202 Approved
FEATURES
• Terminations: axial, standard tin / lead (SnPb),
100 % tin (RoHS-compliant) available
Available
• For -55 °C to +125 °C operation
Available
• All tantalum case
• Glass to tantalum hermetic seal
• Low ESR
• High CV per unit volume
Available
• Extremely low leakage current
• High permissible ripple current
PERFORMANCE CHARACTERISTICS
• 3 V reverse voltage capability
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Capacitance Tolerance: at 120 Hz, +25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
DC Leakage Current (DCL Max.):
at +25 °C and above: leakage current shall not exceed the
values listed in the Standard Ratings tables
APPLICATIONS
Designed specifically for the severe operating environment
of aerospace applications, this capacitor was developed
under partial sponsorship of the Marshall Space Flight
Center, National Aeronautics and Space Administration. To
meet aerospace requirements, the capacitors have a high
resistance to damage from shock and vibration.
APPROVALS
• CECC-30202-001 style 735D
• CECC-30202-801 style 735DE
• CECC-30202-005 style CT79
ORDERING INFORMATION
CT79
735D
735DE
226
X0
025
A
2
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
STYLE NUMBER
RoHS-COMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
See table of
Dimensions
0 = bare case
2 = outer polyester
film insulation
3 = high temperature
film insulation
E3 = 100 % tin
termination
(RoHS-compliant design)
Blank = SnPb
termination
(standard design)
Note
• Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight.
Revision: 09-Dec-14
Document Number: 40053
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
E
L1
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
D
E
Weld
Tantalum
L2
CASE CODE
D
L1
L2
(Max.)
E
WEIGHT
(g)
(Max.)
T1
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.734
[18.64]
1.500 ± 0.250
[38.10 ± 6.35]
2.6
B
T2
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.922
[23.42]
2.250 ± 0.250
[57.15 ± 6.35]
6.2
C
T3
0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.047
[26.59]
2.250 ± 0.250
[57.15 ± 6.35]
11.6
D
T4
0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
1.343
[34.11]
2.250 ± 0.250
[57.15 ± 6.35]
17.7
TYPE
735D
DCLR 79 / 81
EQUIV.
A
Note
• For insulated parts, add 0.007" [0.178] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
68
120
150
220
470
560
560
1000
1500
2200
A
A
A
B
B
B
C
D
C
D
735D686X06R3A2
735D127X06R3A2
735D157X06R3A2
735D227X06R3B2
735D477X06R3B2
735D567X06R3B2
735D567X06R3C2
735D108X06R3D2
735D158X06R3C2
735D228X06R3D2
47
68
82
100
150
180
330
390
470
680
820
1000
1200
1500
1800
A
A
A
A
B
B
B
B
C
D
D
C
C
D
D
735D476X0010A2
735D686X0010A2
735D826X0010A2
735D107X0010A2
735D157X0010B2
735D187X0010B2
735D337X0010B2
735D397X0010B2
735D477X0010C2
735D687X0010D2
735D827X0010D2
735D108X0010C2
735D128X0010C2
735D158X0010D2
735D188X0010D2
Revision: 09-Dec-14
MAX. DF
AT +20 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+20 °C
+85 °C
+125 °C
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
15
60
1.0
2.0
21
81
1.5
3.0
34
80
2.0
9.0
40
30
1.0
6.5
90
46
2.0
10
106
48
2.0
10
50
25
2.0
16
72
22
3.0
14
172
36
5.0
20
170
22
6.0
24
10 VDC AT +85 °C; 7 VDC AT +125 °C
13
100
1.0
2.0
21
85
1.5
3.0
25
84
2.0
6.0
30
82
2.0
6.0
30
45
1.0
7.0
30
40
1.0
7.0
65
52
2.0
10
74
54
2.0
10
44
25
2.0
15
46
20
3.0
16
57
22
3.0
16
92
36
4.0
16
137
36
5.0
20
114
23
7.0
25
138
24
7.0
25
MAX. CAP. CHANGE
(%) AT
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
-55 °C
+85 °C
+125 °C
-40
-41
-42
-44
-60
-68
-64
-80
-90
-90
+14
+15
+16
+16
+20
+20
+18
+25
+25
+25
+16
+16
+16
+18
+20
+20
+20
+25
+25
+25
960
820
820
1370
1285
1255
1900
2390
1615
2265
-36
-40
-40
-40
-32
-35
-54
-60
-65
-80
-80
-80
-80
-88
-88
+14
+15
+16
+16
+14
+14
+17
+19
+18
+25
+25
+25
+25
+30
+30
+16
+16
+16
+16
+16
+16
+18
+20
+20
+25
+25
+25
+25
+30
+30
855
820
820
820
1275
1300
1195
1195
1800
2490
2360
1720
1720
2360
2360
Document Number: 40053
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS
MAX. DF
AT +20 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
33
A
735D336X0016A2
10
90
1.0
47
A
735D476X0016A2
20
100
56
A
735D566X0016A2
22
100
120
B
735D127X0016B2
25
220
B
735D227X0016B2
270
B
735D277X0016B2
330
C
470
560
+20 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
-55 °C
+85 °C
+125 °C
2.0
-28
+14
+16
820
1.5
3.0
-28
+16
+16
760
1.5
3.0
-28
+16
+16
760
50
1.0
7.0
-28
+14
+16
1230
42
62
2.0
10
-35
+16
+16
1215
55
60
2.0
12
-45
+18
+18
1215
735D337X0016C2
40
30
2.0
14
-58
+18
+20
1760
D
735D477X0016D2
37
24
3.0
18
-75
+25
+25
2100
D
735D567X0016D2
40
23
3.0
18
-80
+25
+25
2300
680
C
735D687X0016C2
80
42
5.0
20
-80
+25
+25
1585
820
C
735D827X0016C2
95
42
6.0
24
-80
+25
+25
1585
1000
D
735D108X0016D2
92
25
8.0
32
-82
+25
+25
2300
1200
D
736D128X0016D2
103
25
8.0
32
-84
+25
+30
2300
16 VDC AT +85 °C; 10 VDC AT +125 °C
25 VDC AT +85 °C; 16 VDC AT +125 °C
22
A
735D226X0025A2
7
140
1.0
2.0
-20
+10
+12
800
27
A
735D276X0025A2
11
140
1.5
3.0
-20
+12
+12
715
33
A
735D336X0025A2
13
130
1.5
3.0
-24
+14
+14
715
39
A
735D396X0025A2
16
120
2.0
9.0
-28
+16
+16
715
100
B
735D107X0025B2
21
50
1.0
9.0
-28
+13
+15
1215
150
B
735D157X0025B2
35
62
2.0
10
-35
+15
+15
1130
180
B
735D187X0025B2
35
60
2.0
10
-48
+14
+15
1130
220
C
735D227X0025C2
35
33
2.0
13
-52
+18
+20
1615
330
D
735D337X0025D2
30
27
3.0
20
-60
+25
+25
1865
390
C
735D397X0025C2
48
48
7.0
28
-70
+25
+25
1400
390
D
735D397X0025D2
35
24
3.0
20
-68
+25
+25
2025
470
C
735D477X0025C2
48
48
7.0
28
-76
+25
+25
1400
560
C
735D567X0025C2
60
48
7.0
28
-80
+25
+25
1400
680
D
735D687X0025D2
60
24
8.0
32
-80
+25
+25
1940
820
D
735D827X0025D2
82
26
8.0
32
-80
+25
+25
1865
15
A
735D156X0040A2
7
175
1.0
2.0
-20
+10
+12
660
18
A
735D186X0040A2
10
200
1.5
4.0
-20
+12
+12
580
40 VDC AT +85 °C; 25 VDC AT +125 °C
22
A
735D226X0040A2
11
190
1.5
4.0
-24
+12
+12
580
68
B
735D686X0040B2
15
60
1.0
8.0
-24
+13
+15
1285
100
B
735D107X0040B2
25
60
2.0
10
-40
+15
+15
1285
120
B
735D127X0040B2
30
62
2.0
12
-32
+15
+15
1245
150
C
735D157X0040C2
23
35
2.0
12
-48
+14
+15
1525
220
D
735D227X0040D2
23
27
3.0
22
-58
+23
+23
1900
270
C
735D277X0040C2
37
52
7.0
28
-60
+25
+25
1375
330
C
735D337X0040C2
43
52
8.0
32
-65
+25
+25
1375
390
D
735D397X0040D2
43
30
8.0
32
-75
+25
+25
1900
470
D
735D477X0040D2
45
30
9.0
36
-80
+25
+25
1900
Revision: 09-Dec-14
Document Number: 40053
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
10
12
15
47
56
82
100
120
150
220
270
330
A
A
A
B
B
B
C
C
D
C
D
D
735D106X0063A2
735D126X0063A2
735D156X0063A2
735D476X0063B2
735D566X0063B2
735D826X0063B2
735D107X0063C2
735D127X0063C2
735D157X0063D2
735D227X0063C2
735D277X0063D2
735D337X0063D2
6.8
8.2
33
47
68
68
82
100
120
150
150
180
220
A
A
B
B
B
C
C
C
D
C
D
C
D
735D685X0075A2
735D825X0075A2
735D336X0075B2
735D476X0075B2
735D686X0075B2
735D686X0075C2
735D826X0075C2
735D107X0075C2
735D127X0075D2
735D157X0075C2
735D157X0075D2
735D187X0075C2
735D227X0075D2
4.7
5.6
22
33
33
39
39
47
56
68
68
82
100
A
A
B
B
C
B
C
C
C
C
D
D
D
735D475X0100A2
735D565X0100A2
735D226X0100B2
735D336X0100B2
735D336X0100C2
735D396X0100B2
735D396X0100C2
735D476X0100C2
735D566X0100C2
735D686X0100C2
735D686X0100D2
735D826X0100D2
735D107X0100D2
2.7
3.3
3.9
15
18
39
47
68
82
A
A
A
B
B
C
C
D
D
735D275X0125A2
735D335X0125A2
735D395X0125A2
735D156X0125B2
735D186X0125B2
735D396X0125C2
735D476X0125C2
735D686X0125D2
735D826X0125D2
Revision: 09-Dec-14
MAX. DF
AT +20 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+20 °C
+85 °C
+125 °C
63 VDC AT +85 °C; 40 VDC AT +125 °C
4
250
1.0
2.0
7
233
2.0
4.0
8
220
2.0
9.0
13
70
1.0
9.0
18
72
2.0
12
22
70
2.0
12
18
42
2.0
11
20
49
3.0
18
17
27
3.0
22
37
55
8.0
32
26
33
9.0
36
32
31
10
40
75 VDC AT +85 °C; 50 VDC AT +125 °C
3
300
1.0
2.0
6
280
1.5
3.0
10
90
1.0
9.0
15
87
2.0
10
21
86
2.0
12
13
50
2.0
10
15
45
2.0
10
19
60
8.0
32
12
28
3.0
24
25
60
9.0
36
17
30
9.0
36
28
60
9.0
36
37
32
10
40
100 VDC AT +85 °C; 70 VDC AT +125 °C
3
500
1.0
2.0
6
475
2.0
5.0
8
100
1.0
9.0
14
95
3.0
15
7
93
2.0
10
10
92
2.0
12
8
90
2.0
10
9
70
2.0
10
11
60
2.0
10
15
60
10
40
8
42
3.0
26
10
39
3.0
24
11
36
3.0
24
125 VDC AT +85 °C; 85 VDC AT +125 °C
3
780
1.0
2.0
3
600
1.0
2.0
3.5
557
2.0
5.0
6
167
1.0
7.0
8
133
2.0
10
8
90
2.0
10
9
70
2.0
10
8
42
3.0
26
10
39
3.0
24
MAX. CAP. CHANGE
(%) AT
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
-55 °C
+85 °C
+125 °C
-20
-20
-22
-24
-26
-36
-37
-40
-45
-50
-70
-72
+8
+8
+9
+13
+14
+15
+14
+18
+20
+25
+24
+25
+9
+9
+9
+15
+15
+15
+15
+18
+20
+25
+25
+25
575
575
565
1150
1150
1150
1420
1420
1865
1345
1850
1850
-20
-22
-24
-30
-36
-30
-32
-36
-36
-40
-48
-50
-60
+8
+9
+10
+14
+15
+14
+15
+17
+20
+20
+21
+22
+22
+9
+9
+12
+14
+15
+15
+15
+18
+20
+20
+22
+22
+22
610
610
1079
1055
1055
1525
1335
1335
1915
1335
1915
1335
1850
-16
-17
-16
-16
-16
-24
-16
-23
-28
-30
-24
-24
-35
+7
+8
+8
+8
+8
+12
+8
+10
+14
+15
+15
+18
+20
+8
+8
+8
+8
+8
+12
+8
+10
+15
+15
+15
+18
+20
565
530
1065
1065
1200
1065
1285
1390
1335
1335
1860
1860
1860
-16
-16
-16
-16
-16
-16
-23
-24
-24
+7
+7
+8
+7
+8
+8
+10
+15
+18
+8
+8
+8
+8
+8
+8
+10
+15
+18
455
495
495
1050
1065
1285
1285
1860
1860
Document Number: 40053
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS to MIL range CLR79
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+25 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
6 VDC AT +85 °C; 4 VDC AT +125 °C
30
A
735D306X0006A2
4.0
100
0.75
1.5
-40
+12
+12
68
A
735D686X0006A2
2.9
60
0.75
1.5
-40
+16
+16
820
960
140
B
735D147X0006B2
2.2
40
1.0
3.0
-40
+16
+16
1200
160
A
735D167X0006A2
4.0
80
1.5
3.0
-42
+16
+16
820
270
B
735D277X0006B2
2.0
25
1.0
2.0
-44
+20
+20
1375
330
C
735D337X0006C2
1.4
20
2.0
6.0
-44
+16
+16
1800
560
B
735D567X0006B2
2.4
48
2.0
10
-68
+20
+20
1255
1900
560
C
735D567X0006C2
1.3
25
2.0
6.0
-64
+20
+20
1200
D
735D128X0006D2
0.9
20
3.0
12
-80
+25
+25
2388
1500
C
735D158X0006C2
1.8
36
3.0
15
-84
+25
+25
1615
2200
D
735D228X0006D2
1.0
22
4.0
15
-86
+25
+25
2265
8 VDC AT +85 °C; 5 VDC AT +125 °C
25
A
735D256X0008A2
4.0
100
0.75
1.5
-40
+12
+12
820
56
A
735D566X0008A2
3.3
59
0.75
1.5
-40
+16
+16
900
120
A
735D127X0008A2
4.0
80
1.0
2.0
-44
+20
+16
820
120
B
735D127X0008B2
2.6
50
1.0
2.0
-44
+20
+16
1230
1300
220
B
735D227X0008B2
2.4
30
1.0
2.0
-44
+18
+20
290
C
735D297X0008C2
1.8
25
2.0
6.0
-64
+20
+16
1745
430
B
735D437X0008B2
2.6
54
2.0
10
-64
+20
+20
1230
430
C
735D437X0008C2
1.4
25
2.0
6.0
-64
+20
+20
1825
850
D
735D857X0008D2
1.0
22
3.0
12
-80
+25
+25
2456
10 VDC AT +85 °C; 7 VDC AT +125 °C
20
A
735D206X0010A2
4.0
175
0.75
1.5
-32
+12
+12
820
100
B
735D107X0010B2
2.4
60
1.0
2.0
-35
+16
+16
1200
250
C
735D257X0010C2
1.8
30
2.0
6.0
-40
+16
+16
1720
300
B
735D307X0010B2
2.6
52
2.0
5.0
-54
+18
+18
1195
350
B
735D357X0010B2
2.6
52
2.0
5.0
-60
+18
+18
1195
390
C
735D397X0010C2
1.5
25
2.0
6.0
-64
+20
+20
1800
750
D
735D757X0010D2
0.9
22
3.0
12
-80
+25
+25
2487
850
C
735D857X0010C2
1.8
36
3.0
12
-84
+25
+25
1720
15
A
735D156X0015A2
4.4
155
0.75
1.5
-24
+12
+12
780
33
A
735D336X0015A2
4.0
90
0.75
1.5
-28
+16
+16
820
47
A
735D476X0015A2
4.7
100
1.0
2.0
-28
+16
+16
760
56
A
735D566X0015A2
4.7
l00
1.0
2.0
-28
+16
+16
760
15 VDC AT +85 °C; 10 VDC AT +125 °C
70
B
735D706X0015B2
2.8
75
1.0
2.0
-28
+16
+16
1150
120
B
735D127X0015B2
2.6
50
1.0
2.0
-28
+16
+16
1230
170
C
735D177X0015C2
2.4
35
2.0
6.0
-32
+16
+16
1480
220
B
735D227X0015B2
2.8
62
2.0
5.0
-35
+16
+16
1215
1215
270
B
735D277X0015B2
2.8
60
2.0
5.0
-45
+18
+18
270
C
735D277X0015C2
2.2
30
2.0
6.0
-56
+20
+20
1709
290
B
735D297X0015B2
2.8
65
2.0
5.0
-54
+18
+18
1215
540
D
735D547X0015D2
1.0
23
3.0
12
-80
+25
+25
2300
750
C
735D757X0015C2
2.1
42
3.0
15
-80
+25
+25
1582
850
D
735D857X0015D2
1.0
24
4.0
15
-80
+25
+25
2300
1200
D
735D128X0015D2
1.0
25
4.0
15
-84
+25
+25
2300
Revision: 09-Dec-14
Document Number: 40053
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS to MIL range CLR79
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
10
A
735D106X0025A2
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+25 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
-16
+9
+9
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
25 VDC AT +85 °C; 15 VDC AT +125 °C
5.3
220
0.75
1.5
715
43
A
735D436X0025A2
5.3
120
1.5
3.0
-28
+16
+16
715
50
B
735D506X0025B2
3.0
70
1.0
2.0
-28
+15
+15
1130
120
C
735D127X0025C2
2.6
38
2.0
6 .0
-32
+15
+15
1420
160
B
735D167X0025B2
3.0
60
2.0
5 .0
-35
+15
+15
1130
180
C
735D187X0025C2
2.0
32
2.0
6 .0
-48
+15
+15
1531
350
D
735D357X0025D2
1.0
24
3.0
12
-64
+25
+25
2246
850
D
735D857X0025D2
1.3
26
4.0
15
-80
+25
+25
1970
30 VDC AT +85 °C; 20 VDC AT +125 °C
8.0
A
735D805X0030A2
6.6
275
0.75
1.5
-16
+12
+12
640
15
A
735D156X0030A2
6.2
175
0.75
1.5
-20
+12
+12
660
25
A
735D256X0030A2
6.6
160
1.5
3.0
-24
+12
+12
640
33
A
735D336X0030A2
6.6
160
1.5
3.0
-26
+12
+12
640
40
B
735D406X0030B2
3.7
65
1.0
2.0
-24
+12
+12
1065
68
B
735D686X0030B2
2.8
60
1.0
2.0
-24
+15
+15
1215
100
C
735D107X0030C2
2.6
40
2.0
6.0
-28
+12
+12
1477
120
B
735D127X0030B2
3.0
60
2.0
5.0
-32
+15
+15
1185
150
B
735D157X0030B2
3.0
60
2.0
6.0
-35
+15
+15
1185
150
C
735D157X0030C2
2.3
35
2.0
6.0
-48
+15
+15
1525
170
B
735D177X0030B2
3.0
65
2.0
7.0
-48
+15
+15
1185
300
C
735D307X0030C2
2.2
44
3.0
12
-60
+15
+15
1559
300
D
735D307X0030D2
1.2
31
3.0
12
-60
+25
+25
2100
330
C
735D337X0030C2
2.6
52
3.0
12
-65
+25
+25
1373
350
C
735D357X0030C2
2.6
52
3.0
15
-70
+25
+25
1477
390
C
735D397X0030C2
2.6
52
3.0
15
-75
+25
+25
1477
430
C
735D437X0030C2
2.6
54
3.0
15
-80
+25
+25
1477
560
D
735D567X0030D2
1.4
30
4.0
20
-80
+25
+25
1050
+6
+6
580
50 VDC AT +85 °C; 30 VDC AT +125 °C
5.0
A
735D505X0050A2
8.0
400
0.75
2.0
-16
10
A
735D106X0050A2
6.4
250
0.75
2.0
-20
+9
+9
640
18
A
735D186X0050A2
8.0
200
1.5
3.0
-24
+12
+12
580
22
A
735D226X0050A2
8.0
190
1.5
4.0
-24
+12
+12
580
25
B
735D256X0050B2
4.6
95
1.0
3.0
-20
+12
+12
1065
47
B
735D476X0050B2
3.7
70
1.0
3.0
-24
+15
+15
1215
60
C
735D606X0050C2
2.9
45
2.0
7.0
-16
+12
+12
1285
82
C
735D826X0050C2
2.3
45
2.0
7.0
-32
+15
+15
1460
100
B
735D107X0050B2
3.2
67
2.0
7.0
-40
+15
+15
1150
160
D
735D167X0050D2
1.3
27
3.0
16
-50
+23
+23
2040
270
C
735D277X0050C2
2.6
52
3.0
15
-60
+25
+25
1373
350
D
735D357X0050D2
1.5
30
4.0
20
-70
+25
+25
1900
390
D
735D397X0050D2
1.5
30
5.0
25
-75
+25
+25
1900
430
D
735D437X0050D2
1.5
31
5.0
25
-80
+25
+25
1900
Revision: 09-Dec-14
Document Number: 40053
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS to MIL range CLR79
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
4.0
A
735D405X0060A2
MAX. ESR
AT +25 °C
120 Hz
()
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+25 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
-16
+6
+6
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
60 VDC AT +85 °C; 40 VDC AT +125 °C
9.3
550
0.75
2.0
525
8.2
A
735D825X0060A2
6.6
275
0.75
2.0
-20
+9
+9
625
20
B
735D206X0060B2
4.0
105
1.0
4.0
-16
+12
+12
1026
39
B
735D396X0060B2
3.0
90
1.0
4.0
-24
+12
+12
1185
50
C
735D506X0060C2
2.6
50
2.0
7.0
-16
+12
+12
1341
68
C
735D686X0060C2
2.4
50
2.0
7.0
-30
+15
+15
1393
82
B
735D826X0060B2
3.2
70
2.0
7.0
-36
+15
+15
1150
140
D
735D147X0060D2
1.3
28
3.0
16
-40
+20
+20
1990
220
C
735D227X0060C2
2.6
55
3.0
15
-50
+25
+25
1341
270
D
735D277X0060D2
1.5
33
5.0
22
-70
+25
+25
1850
330
D
735D337X0060D2
1.5
31
5.0
25
-72
+25
+25
1850
2.0
-16
+6
+6
525
75 VDC AT +85 °C; 50 VDC AT +125 °C
3.5
A
735D355X0075A2
9.5
650
1.0
9.0
A
735D905X0075A2
8.2
280
2.0
5.0
-20
+9
+9
572
15
B
735D156X0075B2
5.0
150
1.0
4.0
-16
+9
+9
1000
40
C
735D406X0075C2
3.0
60
2.0
8.0
-16
+12
+12
1293
43
B
735D436X0075B2
3.8
89
2.0
8.0
-24
+12
+12
1051
56
B
735D566X0075B2
3.8
84
2.0
10
-30
+15
+15
1051
56
C
735D566X0075C2
2.4
60
2.0
8.0
-28
+15
+15
1396
110
D
735D117X0075D2
1.3
29
3.0
20
-35
+20
+20
1990
250
D
735D257X0075D2
1.5
33
5.0
22
-68
+25
+25
1850
30
B
735D306X0100B2
3.7
99
2.0
12
-16
+8
+8
1065
30
C
735D306X0100C2
3.3
80
2.0
8.0
-16
+8
+8
1200
43
C
735D436X0100C2
2.4
70
2.0
8.0
-20
+8
+8
1389
86
D
735D866X0100D2
1.5
30
3.0
20
-24
+15
+15
1859
100 VDC AT +85 °C; 70 VDC AT +125 °C
125 VDC AT +85 °C; 85 VDC AT +125 °C
3.6
A
735D365X0125A2
11.1
600
1.0
2.0
-16
+8
+8
495
14
B
735D146X0125B2
5.0
167
1.0
4.0
-16
+8
+8
1050
25
C
735D256X0125C2
2.6
93
2.0
8.0
-16
+8
+8
1335
56
D
735D566X0125D2
1.5
47
3.0
20
-25
+15
+15
1859
Revision: 09-Dec-14
Document Number: 40053
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
STANDARD RATINGS CT79
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+25 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
68
A
CT79686X06R3A2
15
72
1
12
-40
+14
+16
960
270
B
CT79277X06R3B2
41
30
1
7
-44
+17.5
+20
1375
560
C
CT79567X06R3C2
55
30
2
16
-64
+17.5
+20
1900
1200
D
CT79128X06R3D2
94
24
4
16
-80
+25
+25
2265
10 VDC AT +85 °C; 6.3 VDC AT +125 °C
47
A
CT79476X0010A2
14
120
1
2
-36
+14
+16
855
180
B
CT79187X0010B2
29
48
1
7
-36
+14
+16
1300
390
C
CT79397X0010C2
44
30
2
16
-64
+17.5
+20
1800
820
D
CT79827X0010D2
65
28
4
16
-80
+25
+25
2360
16 VDC AT +85 °C; 10 VDC AT +125 °C
33
A
CT79336X0016A2
10
108
1
2
-28
+14
+16
820
120
B
CT79127X0016B2
24
60
1
9
-28
+17.5
+20
1230
270
C
CT79277X0016C2
45
36
2
16
-56
+17.5
+20
1500
560
D
CT79567X0016D2
44
28
6
24
-80
+25
+25
2300
2
-20
+10.5
+12
800
25 VDC AT +85 °C; 16 VDC AT +125 °C
22
A
CT79226X0025A2
7
168
1
100
B
CT79107X0025B2
21
60
1
10
-28
+13
+15
1215
180
C
CT79187X0025C2
29
39
2
18
-48
+13
+15
1460
390
D
CT79397X0025D2
40
29
7
28
-70
+25
+25
1970
40 VDC AT +85 °C; 25 VDC AT +125 °C
12
A
CT79126X0040A2
6
234
1
2
-24
+8
+10
660
56
B
CT79566X0040B2
14
78
1
9
-28
+13
+15
1100
100
C
CT79107X0040C2
18
48
2
17
-40
+13
+15
1400
220
D
CT79227X0040D2
27
31
8
32
-55
+25
+25
1900
8.2
A
CT79825X0063A2
4.5
330
1
2
-24
+8
+9
625
39
B
CT79396X0063B2
12
108
1
9
-28
+10.5
+12
1015
68
C
CT79686X0063C2
13
60
2
16
-32
+10.5
+12
1365
150
D
CT79157X0063D2
18
34
8
32
-40
+20
+20
1850
63 VDC AT +85 °C; 40 VDC AT +125 °C
80 VDC AT +85 °C; 50 VDC AT +125 °C
6.8
A
CT79685X0080A2
5
360
1
2
-20
+8
+9
610
33
B
CT79336X0080B2
10
108
1
10
-24
+10.5
+15
1000
56
C
CT79566X0080C2
11
72
2
17
-28
+10.5
+15
1350
100
D
CT79107X0080D2
12
36
9
36
-35
+20
+20
1825
565
100 VDC AT +85 °C; 63 VDC AT +125 °C
4.7
A
CT79475X0100A2
3
600
1
2
-16
+7
+8
22
B
CT79226X0100B2
8
132
1
9
-16
+7
+8
935
47
C
CT79476X0100C2
8
84
2
17
-20
+7
+8
1335
82
D
CT79826X0100D2
10
40
9
36
-25
+15
+15
1800
495
125 VDC AT +85 °C; 80 VDC AT +125 °C
3.9
A
CT79395X0125A2
3.5
720
1
2
-16
+7
+8
15
B
CT79156X0125B2
6
200
1
7
-16
+7
+8
860
27
C
CT79276X0125C2
6
106
2
13
-16
+7
+8
1200
56
D
CT79566X0125D2
7
58
10
40
-25
+15
+15
1800
Revision: 09-Dec-14
Document Number: 40053
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
735D, 735DE, CT79 (CECC 30202)
www.vishay.com
Vishay
EXTENDED RATINGS CT79
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. DCL
(μA) AT
+25 °C
+85 °C
+125 °C
MAX. CAP. CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
MAX. RMS
RIPPLE
CURRENT
40 kHz
(mA)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
150
A
CT79157X06R3A2
34
80
2.0
9.0
-42
+16
+16
960
560
B
CT79567X06R3B2
106
48
2.0
10
-68
+20
+20
1550
1500
C
CT79158X06R3C2
172
36
5.0
20
-90
+25
+25
1930
2200
D
CT79228X06R3D2
170
22
6.0
24
-90
+25
+25
2330
10 VDC AT +85 °C; 6.3 VDC AT +125 °C
100
A
CT79107X0010A2
30
82
2.0
6.0
-40
+16
+16
930
390
B
CT79397X0010B2
74
54
2.0
10
-60
+19
+20
1470
1200
C
CT79128X0010C2
137
36
5.0
20
-80
+25
+25
1850
1800
D
CT79188X0010D2
138
24
7.0
25
-88
+30
+30
2300
16 VDC AT +85 °C; 10 VDC AT +125 °C
56
A
CT79566X0016A2
22
100
1.5
3.0
-28
+16
+16
890
270
B
CT79277X0016B2
55
60
2.0
12
-45
+18
+28
1430
820
C
CT79827X0016C2
95
42
6.0
24
-80
+25
+25
1800
1200
D
CT79128X0016D2
103
25
8.0
32
-84
+25
+30
2300
9.0
-28
+16
+16
820
25 VDC AT +85 °C; 16 VDC AT +125 °C
39
A
CT79396X0025A2
16
120
2.0
180
B
CT79187X0025B2
36
60
2.0
10
-48
+14
+15
1400
560
C
CT79567X0025C2
60
48
7.0
28
-80
+25
+25
1750
820
D
CT79827X0025D2
82
26
8.0
32
-80
+25
+25
2100
40 VDC AT +85 °C; 25 VDC AT +125 °C
22
A
CT79226X0040A2
11
190
1.5
4.0
-24
+12
+12
745
120
B
CT79127X0040B2
30
62
2.0
12
-32
+15
+15
1315
330
C
CT79337X0040C2
43
52
8.0
32
-65
+25
+25
1640
470
D
CT79477X0040D2
45
30
9.0
35
-80
+25
+25
2040
15
A
CT79156X0063A2
8.0
220
2.0
9.0
-22
+9
+9
650
82
B
CT79826X0063B2
22
70
2.0
12
-36
+15
+15
1220
220
C
CT79227X0063C2
37
55
8.0
32
-50
+25
+25
1520
330
D
CT79337X0063D2
32
31
10.0
40
-72
+25
+25
1970
63 VDC AT +85 °C; 40 VDC AT +125 °C
80 VDC AT +85 °C; 50 VDC AT +125 °C
8.2
A
CT79825X0080A2
6.0
280
1.5
3.0
-22
+9
+9
610
68
B
CT79686X0080B2
21
86
2.0
12
-36
+15
+15
1200
150
C
CT79157X0080C2
25
60
9.0
36
-40
+20
+20
1490
220
D
CT79227X0080D2
37
32
10
40
-60
+22
+22
1900
5.6
A
CT79565X0100A2
6.0
475
2.0
5.0
-17
+8
+8
565
39
B
CT79396X0100B2
10
92
2.0
12
-24
+12
+12
1300
68
C
CT79686X0100C2
15
60
10
40
-30
+15
+15
1600
100
D
CT79107X0100D2
11
36
3.0
24
-35
+20
+20
1900
100 VDC AT +85 °C; 63 VDC AT +125 °C
125 VDC AT +85 °C; 80 VDC AT +125 °C
18
B
CT79186X0125B2
8.0
133
2.0
10
-16
+8
+8
1065
47
C
CT79476X0125C2
9.0
70
2.0
10
-23
+10
+10
1500
82
D
CT79826X0125D2
10.0
39
3.0
24
-24
+18
+18
1900
Revision: 09-Dec-14
Document Number: 40053
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000