DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016 Datasheet

DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
Wet Tantalum Capacitors, Space Level, Established Reliability,
DSCC Drawings 06013, 06014, 06015, 06016
FEATURES
• Screened for space level applications
• Tantalum case, hermetically sealed, axial leaded
• Screened M39006/22/25/30/31 capacitors
- “R” or 0.001 %/1000 failure rate
- “H” or high shock and vibration rated
- Enhanced 100 % or group A testing
- Enhanced production lot testing - group b prior to
shipment
• Stability
• Thermal shock
• 1000 h life at +85 °C
CROSS REFERENCE
DSCC DRAWING
MIL SPECIFICATION
STYLE
DSCC 06013
M39006/22
CLR79
DSCC 06014
M39006/25
CLR81
DSCC 06015
M39006/30
CLR90
DSCC 06016
M39006/31
CLR91
Established Reliability “Space Level” Wet Tantalum Capacitors
In accordance with the DSCC drawings, all parts are up-screened from “R” failure rate, “H” characteristic,
MIL-PRF-39006/22/25/30/31 capacitors. Parts are marked with the appropriate DSCC drawing number and PIN (dash number).
For information on the exact performance of these capacitors, please refer to the latest issue of the DSCC drawing and
appropriate military specification.
Revision: 20-Jul-15
Document Number: 40143
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
ORDERING INFORMATION
0601X
XXXXH
DSCC DRAWING NUMBER
PIN OR DASH NUMBER
Indicates the basic
specification; in this case
MIL-PRF-39006
(see Standard Ratings tables)
Note
• Material in this section has been abstracted from DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016.
DIMENSIONS in inches [millimeters]
DSCC 06013 (CLR79 style)
DSCC 06014 (CLR81 style)
DSCC 06015 (CLR90 style)
DSCC 06016 (CLR91 style)
Tantalum feed-through
0.078 [1.98] max. dia.
Terminal
welded
to case
Term. loc. within
0.031 [0.79] r.
of true position
0.250 [6.35] max.
-
+
D dia.
0.094 [2.38]
max.
E
External
weld
E
L
0.025 ± 0.002
[0.64 ± 0.05]
Glass
Case
Circuit diagram
Insulating sleeve
WITH INSULATING
SLEEVE
BARE CASE
CASE
CODE
E
LEAD LENGTH
WEIGHT
(oz./g)
(Max.)
D
L
D (Max.)
L (Max.)
T1
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.219
[5.56]
0.515
[13.08]
1.500 ± 0.250
[38.10 ± 6.35]
0.09
[2.6]
T2
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.312
[7.92]
0.704
[17.88]
2.250 ± 0.250
[57.15 ± 6.35]
0.22
[6.2]
T3
0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
0.406
[10.31]
0.828
[21.03]
2.250 ± 0.250
[57.15 ± 6.35]
0.41
[11.6]
T4
0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
0.406
[10.31]
1.126
[28.60]
2.250 ± 0.250
[57.15 ± 6.35]
0.62
[17.7]
Revision: 20-Jul-15
Document Number: 40143
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06013 (1)
30
30
30
68
68
68
140
140
140
270
270
270
330
330
330
560
560
560
1200
1200
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0441H
0442H
0443H
0444H
0445H
0446H
0447H
0448H
0449H
0450H
0451H
0452H
0453H
0454H
0455H
0456H
0457H
0458H
0459H
0460H
25
25
25
56
56
56
120
120
120
220
220
220
290
290
290
430
430
430
850
850
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0461H
0462H
0463H
0464H
0465H
0466H
0467H
0468H
0469H
0470H
0471H
0472H
0473H
0474H
0475H
0476H
0477H
0478H
0479H
0480H
20
20
20
47
47
47
100
100
100
180
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
20
10
5
20
10
5
20
10
5
20
0481H
0482H
0483H
0484H
0485H
0486H
0487H
0488H
0489H
0490H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
6 VDC AT +85 °C; 4 VDC AT +125 °C
1.0
2.0
9
100
1.0
2.0
9
100
1.0
2.0
9
100
1.0
2.0
15
60
1.0
2.0
15
60
1.0
2.0
15
60
1.0
3.0
21
40
1.0
3.0
21
40
1.0
3.0
21
40
1.0
6.5
45
25
1.0
6.5
45
25
1.0
6.5
45
25
2.0
7.9
36
20
2.0
7.9
36
20
2.0
7.9
36
20
2.0
13.0
55
25
2.0
13.0
55
25
2.0
13.0
55
25
3.0
14.0
90
20
3.0
14.0
90
20
8 VDC AT +85 °C; 5 VDC AT +125 °C
1.0
2.0
7.5
100
1.0
2.0
7.5
100
1.0
2.0
7.5
100
1.0
2.0
14
59
1.0
2.0
14
59
1.0
2.0
14
59
1.0
2.0
20
50
1.0
2.0
20
50
1.0
2.0
20
50
1.0
7.0
37
30
1.0
7.0
37
30
1.0
7.0
37
30
2.0
6.0
34
25
2.0
6.0
34
25
2.0
6.0
34
25
2.0
14.0
46
25
2.0
14.0
46
25
2.0
14.0
46
25
4.0
16.0
60
22
4.0
16.0
60
22
10 VDC AT+85 °C; 7 VDC AT +125 °C
1.0
2.0
6
175
1.0
2.0
6
175
1.0
2.0
6
175
1.0
2.0
13
100
1.0
2.0
13
100
1.0
2.0
13
100
1.0
4.0
15
60
1.0
4.0
15
60
1.0
4.0
15
60
1.0
7.0
30
40
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-40
-40
-40
-40
-40
-40
-40
-40
-40
-44
-44
-44
-44
-44
-44
-64
-64
-64
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+16
+16
+16
+20
+20
+20
+16
+16
+16
+20
+20
+20
+25
+25
820
820
820
960
960
960
1200
1200
1200
1375
1375
1375
1800
1800
1800
1900
1900
1900
2265
2265
-40
-40
-40
-40
-40
-40
-44
-44
-44
-44
-44
-44
-64
-64
-64
-64
-64
-64
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+25
+25
820
820
820
900
900
900
1220
1220
1220
1370
1370
1370
1770
1770
1770
1825
1825
1825
2330
2330
-32
-32
-32
-36
-36
-36
-36
-36
-36
-36
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+14
+12
+12
+12
+16
+16
+16
+16
+16
+16
+16
820
820
820
855
855
855
1200
1200
1200
1365
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06013
PIN
FOR
DSCC
06013 (1)
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
180
180
250
250
250
390
390
390
750
750
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
10
5
20
10
5
20
10
5
20
10
0491H
0492H
0493H
0494H
0495H
0496H
0497H
0498H
0499H
0500H
15
15
15
33
33
33
70
70
70
120
120
120
170
170
170
270
270
270
540
540
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0501H
0502H
0503H
0504H
0505H
0506H
0507H
0508H
0509H
0510H
0511H
0512H
0513H
0514H
0515H
0516H
0517H
0518H
0519H
0520H
10
10
10
22
22
22
50
50
50
100
100
100
120
120
120
180
180
180
350
350
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0521H
0522H
0523H
0524H
0525H
0526H
0527H
0528H
0529H
0530H
0531H
0532H
0533H
0534H
0535H
0536H
0537H
0538H
0539H
0540H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
10 VDC AT+85 °C; 7 VDC AT +125 °C
1.0
7.0
30
40
1.0
7.0
30
40
2.0
10.0
30
30
2.0
10.0
30
30
2.0
10.0
30
30
2.0
16.0
44
25
2.0
16.0
44
25
2.0
16.0
44
25
4.0
16.0
50
23
4.0
16.0
50
23
15 VDC AT +85 °C; 10 VDC AT +125 °C
1.0
2.0
5
155
1.0
2.0
5
155
1.0
2.0
5
155
1.0
2.0
10
90
1.0
2.0
10
90
1.0
2.0
10
90
1.0
4.0
13
75
1.0
4.0
13
75
1.0
4.0
13
75
1.0
7.0
18
50
1.0
7.0
18
50
1.0
7.0
18
50
2.0
10.0
25
35
2.0
10.0
25
35
2.0
10.0
25
35
2.0
16.0
32
30
2.0
16.0
32
30
2.0
16.0
32
30
6.0
24.0
40
23
6.0
24.0
40
23
25 VDC AT +85 °C; 15 VDC AT +125 °C
1.0
2.0
4
220
1.0
2.0
4
220
1.0
2.0
4
220
1.0
2.0
6.6
140
1.0
2.0
6.6
140
1.0
2.0
6.6
140
1.0
2.0
11.0
70
1.0
2.0
11.0
70
1.0
2.0
11.0
70
1.0
10.0
15
50
1.0
10.0
15
50
1.0
10.0
15
50
2.0
6.0
21
38
2.0
6.0
21
38
2.0
6.0
21
38
2.0
18.0
26
32
2.0
18.0
26
32
2.0
18.0
26
32
7.0
28.0
35
24
7.0
28.0
35
24
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-36
-36
-40
-40
-40
-64
-64
-64
-80
-80
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+16
+16
+16
+16
+16
+20
+20
+20
+25
+25
1365
1365
1720
1720
1720
1800
1800
1800
2360
2360
-24
-24
-24
-28
-28
-28
-28
-28
-28
-28
-28
-28
-32
-32
-32
-56
-56
-56
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+16
+16
+16
+20
+20
+20
+16
+16
+16
+20
+20
+20
+25
+25
780
780
780
820
820
820
1150
1150
1150
1450
1450
1450
1480
1480
1480
1740
1740
1740
2330
2330
-16
-16
-16
-20
-20
-20
-28
-28
-28
-28
-28
-28
-32
-32
-32
-48
-48
-48
-70
-70
+8
+8
+8
+10.5
+10.5
+10.5
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+25
+25
+9
+9
+9
+12
+12
+12
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+25
+25
715
715
715
825
825
825
1130
1130
1130
1435
1435
1435
1450
1450
1450
1525
1525
1525
1970
1970
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06013
PIN
FOR
DSCC
06013 (1)
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
8.0
8.0
8.0
15
15
15
40
40
40
68
68
68
100
100
100
150
150
150
300
300
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0541H
0542H
0543H
0544H
0545H
0546H
0547H
0548H
0549H
0550H
0551H
0552H
0553H
0554H
0555H
0556H
0557H
0558H
0559H
0560H
5.0
5.0
5.0
10
10
10
25
25
25
47
47
47
60
60
60
82
82
82
160
160
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0561H
0562H
0563H
0564H
0565H
0566H
0567H
0568H
0569H
0570H
0571H
0572H
0573H
0574H
0575H
0576H
0577H
0578H
0579H
0580H
4.0
4.0
4.0
8.2
8.2
8.2
20
20
20
39
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
20
10
5
20
10
5
20
10
5
20
0581H
0582H
0583H
0584H
0585H
0586H
0587H
0588H
0589H
0590H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
30 VDC AT +85 °C; 20 VDC AT +125 °C
1.0
2.0
4
275
1.0
2.0
4
275
1.0
2.0
4
275
1.0
2.0
5
175
1.0
2.0
5
175
1.0
2.0
5
175
1.0
5.0
10
65
1.0
5.0
10
65
1.0
5.0
10
65
1.0
8.0
13
60
1.0
8.0
13
60
1.0
8.0
13
60
2.0
12.0
17
40
2.0
12.0
17
40
2.0
12.0
17
40
2.0
18.0
23
35
2.0
18.0
23
35
2.0
18.0
23
35
8.0
32.0
31
25
8.0
32.0
31
25
50 VDC AT +85 °C; 30 VDC AT +125 °C
1.0
2.0
3
400
1.0
2.0
3
400
1.0
2.0
3
400
1.0
2.0
4
250
1.0
2.0
4
250
1.0
2.0
4
250
1.0
5.0
8
95
1.0
5.0
8
95
1.0
5.0
8
95
1.0
9.0
11
70
1.0
9.0
11
70
1.0
9.0
11
70
2.0
12.0
12
45
2.0
12.0
12
45
2.0
12.0
12
45
2.0
16.0
15
45
2.0
16.0
15
45
2.0
16.0
15
45
8.0
32.0
17
27
8.0
32.0
17
27
60 VDC AT +85 °C; 40 VDC AT +125 °C
1.0
2.0
2.8
550
1.0
2.0
2.8
550
1.0
2.0
2.8
550
1.0
2.0
4
275
1.0
2.0
4
275
1.0
2.0
4
275
1.0
5.0
7
105
1.0
5.0
7
105
1.0
5.0
7
105
1.0
9.0
10
90
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-16
-16
-16
-20
-20
-20
-24
-24
-24
-24
-24
-24
-28
-28
-28
-48
-48
-48
-60
-60
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+13
+13
+13
+10.5
+10.5
+10.5
+13
+13
+13
+25
+25
+12
+12
+12
+12
+12
+12
+12
+12
+12
+15
+15
+15
+12
+12
+12
+15
+15
+15
+25
+25
640
640
640
780
780
780
1120
1120
1120
1285
1285
1285
1450
1450
1450
1525
1525
1525
1950
1950
-16
-16
-16
-24
-24
-24
-20
-20
-20
-28
-28
-28
-16
-16
-16
-32
-32
-32
-50
-50
+5
+5
+5
+8
+8
+8
+10.5
+10.5
+10.5
+13
+13
+13
+10.5
+10.5
+10.5
+13
+13
+13
+25
+25
+6
+6
+6
+9
+9
+9
+12
+12
+12
+15
+15
+15
+12
+12
+12
+15
+15
+15
+25
+25
580
580
580
715
715
715
1005
1005
1005
1155
1155
1155
1335
1335
1335
1400
1400
1400
1900
1900
-16
-16
-16
-24
-24
-24
-16
-16
-16
-28
+5
+5
+5
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+6
+6
+6
+9
+9
+9
+12
+12
+12
+12
525
525
525
625
625
625
930
930
930
1110
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06013
PIN
FOR
DSCC
06013 (1)
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
39
39
50
50
50
68
68
68
140
140
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
10
5
20
10
5
20
10
5
20
10
0591H
0592H
0593H
0594H
0595H
0596H
0597H
0598H
0599H
0600H
3.5
3.5
3.5
6.8
6.8
6.8
15
15
15
33
33
33
40
40
40
56
56
56
110
110
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0601H
0602H
0603H
0604H
0605H
0606H
0607H
0608H
0609H
0610H
0611H
0612H
0613H
0614H
0615H
0616H
0617H
0618H
0619H
0620H
2.5
2.5
2.5
4.7
4.7
4.7
11
11
11
22
22
22
30
30
30
43
43
43
86
86
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0621H
0622H
0623H
0624H
0625H
0626H
0627H
0628H
0629H
0630H
0631H
0632H
0633H
0634H
0635H
0636H
0637H
0638H
0639H
0640H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
60 VDC AT +85 °C; 40 VDC AT +125 °C
1.0
9.0
10
90
1.0
9.0
10
90
2.0
12.0
10
50
2.0
12.0
10
50
2.0
12.0
10
50
2.0
16.0
13
50
2.0
16.0
13
50
2.0
16.0
13
50
8.0
32.0
16
28
8.0
32.0
16
28
75 VDC AT +85 °C; 50 VDC AT +125 °C
1.0
2.0
2.5
650
1.0
2.0
2.5
650
1.0
2.0
2.5
650
1.0
2.0
3.5
300
1.0
2.0
3.5
300
1.0
2.0
3.5
300
1.0
5.0
6
150
1.0
5.0
6
150
1.0
5.0
6
150
1.0
10.0
10
90
1.0
10.0
10
90
1.0
10.0
10
90
2.0
12.0
9
60
2.0
12.0
9
60
2.0
12.0
9
60
2.0
17.0
11
60
2.0
17.0
11
60
2.0
17.0
11
60
9.0
36.0
12
29
9.0
36.0
12
29
100 VDC AT +85 °C; 65 VDC AT +125 °C
1.0
2.0
2
950
1.0
2.0
2
950
1.0
2.0
2
950
1.0
2.0
3
500
1.0
2.0
3
500
1.0
2.0
3
500
1.0
4.0
5
200
1.0
4.0
5
200
1.0
4.0
5
200
1.0
9.0
7.5
100
1.0
9.0
7.5
100
1.0
9.0
7.5
100
2.0
12.0
7
80
2.0
12.0
7
80
2.0
12.0
7
80
2.0
17.0
8.5
70
2.0
17.0
8.5
70
2.0
17.0
8.5
70
9.0
36.0
10
30
9.0
36.0
10
30
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-28
-28
-16
-16
-16
-32
-32
-32
-40
-40
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+20
+20
+12
+12
+12
+12
+12
+12
+12
+12
+20
+20
1110
1110
1330
1330
1330
1365
1365
1365
1850
1850
-16
-16
-16
-20
-20
-20
-16
-16
-16
-24
-24
-24
-16
-16
-16
-28
-28
-28
-35
-35
+5
+5
+5
+8
+8
+8
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+20
+20
+6
+6
+6
+9
+9
+9
+9
+9
+9
+15
+15
+15
+12
+12
+12
+15
+15
+15
+20
+20
525
525
525
610
610
610
890
890
890
1000
1000
1000
1250
1250
1250
1335
1335
1335
1850
1850
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-20
-20
-20
-25
-25
+7
+7
+7
+7
+7
+7
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+15
+15
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+15
+15
505
505
505
565
565
565
835
835
835
965
965
965
1240
1240
1240
1335
1335
1335
1800
1800
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06013
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
1.7
1.7
1.7
3.6
3.6
3.6
9.0
9.0
9.0
14
14
14
18
18
18
25
25
25
56
56
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
PIN
FOR
DSCC
06013 (1)
0641H
0642H
0643H
0644H
0645H
0646H
0647H
0648H
0649H
0650H
0651H
0652H
0653H
0654H
0655H
0656H
0657H
0658H
0659H
0660H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.0
2.0
2
1250
1.0
2.0
2
1250
1.0
2.0
2
1250
1.0
2.0
2.7
600
1.0
2.0
2.7
600
1.0
2.0
2.7
600
1.0
5.0
5
240
1.0
5.0
5
240
1.0
5.0
5
240
1.0
7.0
6
167
1.0
7.0
6
167
1.0
7.0
6
167
2.0
9.0
5
129
2.0
9.0
5
129
2.0
9.0
5
129
2.0
13.0
6
93
2.0
13.0
6
93
2.0
13.0
6
93
10.0
40.0
6.5
32
10.0
40.0
6.5
32
MAX. CAPACITANCE
CHANGE (%) AT
-55 °C
+85 °C
+125 °C
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-25
-25
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+7
+15
+15
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+15
+15
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
415
415
415
520
520
520
755
755
755
860
860
860
1130
1130
1130
1200
1200
1200
1800
1800
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
STANDARD RATINGS: DSCC 06014
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06014 (1)
220
220
820
820
1500
1500
2200
2200
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0177H
0178H
0179H
0180H
0181H
0182H
0183H
0184H
180
180
680
680
1500
1500
1800
1800
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0185H
0186H
0187H
0188H
0189H
0190H
0191H
0192H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
6 VDC AT +85 °C; 4 VDC AT +125 °C
2.0
9.0
50
36
2.0
9.0
50
36
3.0
14.0
155
18
3.0
14.0
155
18
5.0
20.0
172
18
5.0
20.0
172
18
6.0
24.0
170
13
6.0
24.0
170
13
8 VDC AT +85 °C; 5 VDC AT +125 °C
2.0
9.0
41
45
2.0
9.0
41
45
3.0
14.0
130
22
3.0
14.0
130
22
5.0
20.0
170
18
5.0
20.0
170
18
7.0
25.0
138
14
7.0
25.0
138
14
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-64
-64
-88
-88
-90
-90
-90
-90
+13
+13
+16
+16
+20
+20
+25
+25
+16
+16
+20
+20
+25
+25
+30
+30
1000
1000
1500
1500
1900
1900
2300
2300
-60
-60
-83
-83
-90
-90
-90
-90
+13
+13
+16
+16
+20
+20
+25
+25
+16
+16
+20
+20
+25
+25
+30
+30
1000
1000
1500
1500
1900
1900
2300
2300
Notes
Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
(1)
Revision: 20-Jul-15
Document Number: 40143
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06014
PIN
FOR
DSCC
06014 (1)
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
150
150
560
560
1200
1200
1500
1500
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0193H
0194H
0195H
0196H
0197H
0198H
0199H
0200H
100
100
390
390
820
820
1000
1000
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0201H
0202H
0203H
0204H
0205H
0206H
0207H
0208H
68
68
270
270
560
560
680
680
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0209H
0210H
0211H
0212H
0213H
0214H
0215H
0216H
56
56
220
220
470
470
560
560
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0217H
0218H
0219H
0220H
0221H
0222H
0223H
0224H
33
33
120
120
270
270
330
330
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0225H
0226H
0227H
0228H
0229H
0230H
0231H
0232H
27
27
100
100
220
220
270
270
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0233H
0234H
0235H
0236H
0237H
0238H
0239H
0240H
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
10 VDC AT +85 °C; 7 VDC AT +125 °C
2.0
9.0
34
54
2.0
9.0
34
54
3.0
16.0
106
27
3.0
16.0
106
27
5.0
20.0
137
18
5.0
20.0
137
18
7.0
25.0
114
15
7.0
25.0
114
15
15 VDC AT +85 °C; 10 VDC AT +125 °C
2.0
9.0
30
72
2.0
9.0
30
72
3.0
16.0
74
31
3.0
16.0
74
31
6.0
24.0
111
22
6.0
24.0
111
22
8.0
32.0
92
17
8.0
32.0
92
17
25 VDC AT +85 °C; 15 VDC AT +125 °C
2.0
9.0
22
90
2.0
9.0
22
90
3.0
16.0
55
33
3.0
16.0
55
33
7.0
28.0
76
24
7.0
28.0
76
24
8.0
32.0
63
19
8.0
32.0
63
19
30 VDC AT +85 °C; 20 VDC AT +125 °C
2.0
9.0
22
100
2.0
9.0
22
100
3.0
16.0
42
36
3.0
16.0
42
36
8.0
32.0
64
25
8.0
32.0
64
25
9.0
36.0
55
20
9.0
36.0
55
20
50 VDC AT +85 °C; 30 VDC AT +125 °C
2.0
9.0
12.3
135
2.0
9.0
12.3
135
4.0
24.0
22.5
49
4.0
24.0
22.5
49
8.0
32.0
37
29
8.0
32.0
37
29
9.0
36.0
38
22
9.0
36.0
38
22
60 VDC AT +85 °C; 40 VDC AT +125 °C
3.0
12.0
10.2
144
3.0
12.0
10.2
144
4.0
20.0
19
54
4.0
20.0
19
54
8.0
32.0
30
29
8.0
32.0
30
29
9.0
36.0
27
23
9.0
36.0
27
23
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
-55 °C
+85 °C
+125 °C
-55
-55
-77
-77
-88
-88
-88
-88
+13
+13
+16
+16
+20
+20
+25
+25
+16
+16
+20
+20
+25
+25
+30
+30
900
900
1450
1450
1850
1850
2300
2300
-44
-44
-66
-66
-77
-77
-77
-77
+13
+13
+16
+16
+20
+20
+25
+25
+16
+16
+20
+20
+25
+25
+30
+30
900
900
1450
1450
1800
180 0
2300
2300
-40
-40
-62
-62
-72
-72
-72
-72
+12
+12
+13
+13
+20
+20
+25
+25
+15
+15
+16
+16
+25
+25
+30
+30
850
850
1400
1400
1750
1750
2100
2100
-38
-38
-60
-60
-65
-65
-65
-65
+12
+12
+13
+13
+20
+20
+25
+25
+15
+15
+16
+16
+25
+25
+30
+30
800
800
1200
1200
1500
1500
2000
2000
-29
-29
-42
-42
-46
-46
-46
-46
+10
+10
+12
+12
+20
+20
+25
+25
+12
+12
+15
+15
+25
+25
+30
+30
700
700
1200
1200
1450
1450
1900
1900
-24
-24
-36
-36
-40
-40
-45
-45
+10
+10
+12
+12
+16
+16
+20
+20
+12
+12
+15
+15
+20
+20
+25
+25
700
700
1100
1100
1400
1400
1850
1850
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06014
CAPACITANCE
(μF)
CASE
CODE
CAP.
TOL.
(± %)
PIN
FOR
DSCC
06014 (1)
MAX. DCL (μA) AT
+25 °C
+85 °C
+125 °C
MAX. DF
AT +25 °C
(%)
MAX. IMP.
AT -55 °C
()
MAX. CAPACITANCE
CHANGE (%) AT
-55 °C
+85 °C
+125 °C
MAX.
RIPPLE
CURRENT
AT +85 °C
40 kHz
(mA) (2)
75 VDC AT +85 °C; 50 VDC AT +125 °C
22
T1
20
0241H
3.0
12.0
8.5
157
-19
+10
+12
600
22
T1
10
0242H
3.0
12.0
8.5
157
-19
+10
+12
600
82
T2
20
0243H
4.0
24.0
15.2
63
-30
+12
+15
1000
82
T2
10
0244H
4.0
24.0
15.2
63
-30
+12
+15
1000
180
T3
20
0245H
9.0
36.0
24.4
30
-35
+16
+20
1300
180
T3
10
0246H
9.0
36.0
24.4
30
-35
+16
+20
1300
220
T4
20
0247H
10.0
40.0
37.0
24
-40
+20
+25
1800
220
T4
10
0248H
10.0
40.0
37.0
24
-40
+20
+25
1800
100 VDC AT +85 °C; 65 VDC AT +125 °C
10
T1
20
0249H
3.0
12.0
4.5
200
-17
+10
+12
800
10
T1
10
0250H
3.0
12.0
4.5
200
-17
+10
+12
800
39
T2
20
0251H
5.0
24.0
10.4
80
-20
+12
+15
1300
39
T2
10
0252H
5.0
24.0
10.4
80
-20
+12
+15
1300
68
T3
20
0253H
10.0
40.0
11.3
40
-30
+14
+16
1600
68
T3
10
0254H
10.0
40.0
11.3
40
-30
+14
+16
1600
120
T4
20
0255H
12.0
48.0
25
30
-35
+15
+17
2000
120
T4
10
0256H
12.0
48.0
25
30
-35
+15
+17
2000
125 VDC AT +85 °C; 85 VDC AT +125 °C
6.8
T1
20
0257H
3.0
12.0
6.0
300
-14
+10
+12
700
6.8
T1
10
0258H
3.0
12.0
6.0
300
-14
+10
+12
700
27
T2
20
0259H
5.0
24.0
7.2
90
-18
+12
+15
1200
27
T2
10
0260H
5.0
24.0
7.2
90
-18
+12
+15
1200
47
T3
20
0261H
10.0
40.0
7.9
50
-26
+14
+16
1500
47
T3
10
0262H
10.0
40.0
7.9
50
-26
+14
+16
1500
82
T4
20
0263H
12.0
48.0
17.4
32
-30
+15
+17
1900
82
T4
10
0264H
12.0
48.0
17.4
32
-30
+15
+17
1900
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) For ripple current limits at various temperatures, voltages and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
CAP.
CAPACITANCE CASE
TOL.
(μF)
CODE
(± %)
PIN
FOR
DSCC
06015 (1)
+25 °C
30
30
30
68
68
68
140
140
140
270
270
270
330
330
330
560
560
560
1200
1200
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0441H
0442H
0443H
0444H
0445H
0446H
0447H
0448H
0449H
0450H
0451H
0452H
0453H
0454H
0455H
0456H
0457H
0458H
0459H
0460H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
25
25
25
56
56
56
120
120
120
220
220
220
290
290
290
430
430
430
850
850
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0461H
0462H
0463H
0464H
0465H
0466H
0467H
0468H
0469H
0470H
0471H
0472H
0473H
0474H
0475H
0476H
0477H
0478H
0479H
0480H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
6 VDC AT +85 °C; 4 VDC AT +125 °C
2.0
4.5
100
2.0
4.5
100
2.0
4.5
100
2.0
7.5
60
2.0
7.5
60
2.0
7.5
60
3.0
10.5
40
3.0
10.5
40
3.0
10.5
40
6.5
22.5
25
6.5
22.5
25
6.5
22.5
25
7.9
18.0
20
7.9
18.0
20
7.9
18.0
20
13.0
27.5
25
13.0
27.5
25
13.0
27.5
25
14.0
45.0
20
14.0
45.0
20
8 VDC AT +85 °C; 5 VDC AT +125 °C
2.0
3.75
100
2.0
3.75
100
2.0
3.75
100
2.0
7.0
59
2.0
7.0
59
2.0
7.0
59
2.0
10.0
50
2.0
10.0
50
2.0
10.0
50
7.0
18.5
30
7.0
18.5
30
7.0
18.5
30
6.0
17.0
25
6.0
17.0
25
6.0
17.0
25
14.0
23.0
25
14.0
23.0
25
14.0
23.0
25
16.0
30.0
22
16.0
30.0
22
-40
-40
-40
-40
-40
-40
-40
-40
-40
-44
-44
-44
-44
-44
-44
-64
-64
-64
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+16
+16
+16
+20
+20
+20
+16
+16
+16
+20
+20
+20
+25
+25
1.99
1.99
1.99
1.58
1.58
1.58
0.99
0.99
0.99
1.11
1.11
1.11
0.73
0.73
0.73
0.65
0.65
0.65
0.50
0.50
820
820
820
960
960
960
1200
1200
1200
1375
1375
1375
1800
1800
1800
1900
1900
1900
2265
2265
-40
-40
-40
-40
-40
-40
-44
-44
-44
-44
-44
-44
-64
-64
-64
-64
-64
-64
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+20
+25
+25
1.99
1.99
1.99
1.66
1.66
1.66
1.11
1.11
1.11
1.12
1.12
1.12
0.78
0.78
0.78
0.71
0.71
0.71
0.47
0.47
820
820
820
900
900
900
1220
1220
1220
1370
1370
1370
1770
1770
1770
1825
1825
1825
2330
2330
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
PIN
CAP.
CAPACITANCE CASE
FOR
TOL.
(μF)
CODE
DSCC
(± %)
06015 (1)
+25 °C
20
20
20
47
47
47
100
100
100
180
180
180
250
250
250
390
390
390
750
750
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0481H
0482H
0483H
0484H
0485H
0486H
0487H
0488H
0489H
0490H
0491H
0492H
0493H
0494H
0495H
0496H
0497H
0498H
0499H
0500H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
15
15
15
33
33
33
70
70
70
120
120
120
170
170
170
270
270
270
540
540
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0501H
0502H
0503H
0504H
0505H
0506H
0507H
0508H
0509H
0510H
0511H
0512H
0513H
0514H
0515H
0516H
0517H
0518H
0519 H
0520H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
6.0
6.0
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
10 VDC AT +85 °C; 7 VDC AT +125 °C
2.0
3.0
175
2.0
3.0
175
2.0
3.0
175
2.0
6.5
100
2.0
6.5
100
2.0
6.5
100
4.0
7.5
60
4.0
7.5
60
4.0
7.5
60
7.0
15.0
40
7.0
15.0
40
7.0
15.0
40
10.0
15.0
30
10.0
15.0
30
10.0
15.0
30
16.0
22.0
25
16.0
22.0
25
16.0
22.0
25
16.0
25.0
23
16.0
25.0
23
15 VDC AT +85 °C; 10 VDC AT +125 °C
2.0
2.5
155
2.0
2.5
155
2.0
2.5
155
2.0
5.0
90
2.0
5.0
90
2.0
5.0
90
4.0
6.5
75
4.0
6.5
75
4.0
6.5
75
7.0
9.0
50
7.0
9.0
50
7.0
9.0
50
10.0
12.5
35
10.0
12.5
35
10.0
12.5
35
16.0
16.0
30
16.0
16.0
30
16.0
16.0
30
24.0
20.0
23
24.0
20.0
23
-32
-32
-32
-36
-36
-36
-36
-36
-36
-36
-36
-36
-40
-40
-40
-64
-64
-64
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+14
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+16
+16
+16
+16
+16
+16
+16
+16
+16
+20
+20
+20
+25
+25
1.99
1.99
1.99
1.84
1.84
1.84
0.99
0.99
0.99
1.11
1.11
1.11
0.80
0.80
0.80
0.75
0.75
0.75
0.44
0.44
820
820
820
855
855
855
1200
1200
1200
1365
1365
1365
1720
1720
1720
1800
1800
1800
2360
2360
-24
-24
-24
-28
-28
-28
-28
-28
-28
-28
-28
-28
-32
-32
-32
-56
-56
-56
-80
-80
+10.5
+10.5
+10.5
+14
+14
+14
+14
+14
+14
+17.5
+17.5
+17.5
+14
+14
+14
+17.5
+17.5
+17.5
+25
+25
+12
+12
+12
+16
+16
+16
+16
+16
+16
+20
+20
+20
+16
+16
+16
+20
+20
+20
+25
+25
1.99
1.99
1.99
1.66
1.66
1.66
1.11
1.11
1.11
1.12
1.12
1.12
0.78
0.78
0.78
0.71
0.71
0.71
0.47
0.47
780
780
780
820
820
820
1150
1150
1150
1450
1450
1450
1480
1480
1480
1740
1740
1740
2330
2330
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
PIN
CAP.
CAPACITANCE CASE
FOR
TOL.
(μF)
CODE
DSCC
(± %)
06015 (1)
+25 °C
10
10
10
22
22
22
50
50
50
100
100
100
120
120
120
180
180
180
350
350
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0521H
0522H
0523H
0524H
0525H
0526H
0527H
0528H
0529H
0530H
0531H
0532H
0533H
0534H
0535H
0536H
0537H
0538H
0539H
0540H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
7.0
7.0
8
8
8
15
15
15
40
40
40
68
68
68
100
100
100
150
150
150
300
300
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0541H
0542H
0543H
0544H
0545H
0546H
0547H
0548H
0549H
0550H
0551H
0552H
0553H
0554H
0555H
0556H
0557H
0558H
0559H
0560H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
8.0
8.0
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
25 VDC AT +85 °C; 15 VDC AT +125 °C
2.0
2.0
220
2.0
2.0
220
2.0
2.0
220
2.0
3.3
140
2.0
3.3
140
2.0
3.3
140
2.0
5.5
70
2.0
5.5
70
2.0
5.5
70
10.0
7.5
50
10.0
7.5
50
10.0
7.5
50
6.0
10.5
38
6.0
10.5
38
6.0
10.5
38
18.0
13.0
32
18.0
13.0
32
18.0
13.0
32
28.0
17.5
24
28.0
17.5
24
30 VDC AT +85 °C; 20 VDC AT +125 °C
2.0
2.0
275
2.0
2.0
275
2.0
2.0
275
2.0
2.5
175
2.0
2.5
175
2.0
2.5
175
5.0
5.0
65
5.0
5.0
65
5.0
5.0
65
8.0
6.5
60
8.0
6.5
60
8.0
6.5
60
12.0
8.5
40
12.0
8.5
40
12.0
8.5
40
18.0
11.5
35
18.0
11.5
35
18.0
11.5
35
32.0
15.5
25
32.0
15.5
25
-16
-16
-16
-20
-20
-20
-28
-28
-28
-28
-28
-28
-32
-32
-32
-48
-48
-48
-70
-70
+8
+8
+8
+10.5
+10.5
+10.5
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+13
+25
+25
+9
+9
+9
+12
+12
+12
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+15
+25
+25
2.66
2.66
2.66
1.99
1.99
1.99
1.46
1.46
1.46
0.99
0.99
0.99
1.16
1.16
1.16
0.96
0.96
0.96
0.67
0.67
715
715
715
825
825
825
1130
1130
1130
1435
1435
1435
1450
1450
1450
1525
1525
1525
1970
1970
-16
-16
-16
-20
-20
-20
-24
-24
-24
-24
-24
-24
-28
-28
-28
-48
-48
-48
-60
-60
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+13
+13
+13
+10.5
+10.5
+10.5
+13
+13
+13
+25
+25
+12
+12
+12
+12
+12
+12
+12
+12
+12
+15
+15
+15
+12
+12
+12
+15
+15
+15
+25
+25
3.32
3.32
3.32
2.21
2.21
2.21
1.66
0.66
0.66
1.27
1.27
1.27
1.13
1.13
1.13
1.02
1.02
1.02
0.69
0.69
640
640
640
780
780
780
1120
1120
1120
1285
1285
1285
1450
1450
1450
1525
1525
1525
1950
1950
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
PIN
CAP.
CAPACITANCE CASE
FOR
TOL.
(μF)
CODE
DSCC
(± %)
06015 (1)
+25 °C
5
5
5
10
10
10
25
25
25
47
47
47
60
60
60
82
82
82
160
160
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0561H
0562H
0563H
0564H
0565H
0566H
0567H
0568H
0569H
0570H
0571H
0572H
0573H
0574H
0575H
0576H
0577H
0578H
0579H
0580H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
6.0
6.0
4
4
4
8.2
8.2
8.2
20
20
20
39
39
39
50
50
50
68
68
68
140
140
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0581H
0582H
0583H
0584H
0585H
0586H
0587H
0588H
0589H
0590H
0591H
0592H
0593H
0594H
0595H
0596H
0597H
0598H
0599H
0600H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
8.0
8.0
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
50 VDC AT +85 °C; 30 VDC AT +125 °C
2.0
1.5
400
2.0
1.5
400
2.0
1.5
400
2.0
2.0
250
2.0
2.0
250
2.0
2.0
250
5.0
4.0
95
5.0
4.0
95
5.0
4.0
95
9.0
5.0
70
9.0
5.0
70
9.0
5.0
70
12.0
6.0
45
12.0
6.0
45
12.0
6.0
45
16.0
7.5
45
16.0
7.5
45
16.0
7.5
45
32.0
8.5
27
32.0
8.5
27
60 VDC AT +85 °C; 40 VDC AT +125 °C
2.0
1.4
550
2.0
1.4
550
2.0
1.4
550
2.0
2.0
275
2.0
2.0
275
2.0
2.0
275
5.0
3.5
105
5.0
3.5
105
5.0
3.5
105
9.0
5.0
90
9.0
5.0
90
9.0
5.0
90
12.0
5.0
50
12.0
5.0
50
12.0
5.0
50
16.0
6.5
50
16.0
6.5
50
16.0
6.5
50
32.0
8.0
28
32.0
8.0
28
-16
-16
-16
-24
-24
-24
-20
-20
-20
-28
-28
-28
-16
-16
-16
-32
-32
-32
-50
-50
+5
+5
+5
+8
+8
+8
+10.5
+10.5
+10.5
+13
+13
+13
+10.5
+10.5
+10.5
+13
+13
+13
+25
+25
+6
+6
+6
+9
+9
+9
+12
+12
+12
+15
+15
+15
+12
+12
+12
+15
+15
+15
+25
+25
3.98
3.98
3.98
2.66
2.66
2.66
2.13
2.13
2.13
1.56
1.56
1.56
1.33
1.33
1.33
1.22
1.22
1.22
0.71
0.71
580
580
580
715
715
715
1005
1005
1005
1155
1155
1155
1335
1335
1335
1400
1400
1400
1900
1900
-16
-16
-16
-24
-24
-24
-16
-16
-16
-28
-28
-28
-16
-16
-16
-32
-32
-32
-40
-40
+5
+5
+5
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+20
+20
+6
+6
+6
+9
+9
+9
+12
+12
+12
+12
+12
+12
+12
+12
+12
+12
+12
+12
+20
+20
4.65
4.65
4.65
3.24
3.24
3.24
2.32
2.32
2.32
1.70
1.70
1.70
1.33
1.33
1.33
1.27
1.27
1.27
0.76
0.76
525
525
525
625
625
625
930
930
930
1110
1110
1110
1330
1330
1330
1365
1365
1365
1850
1850
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
PIN
CAP.
CAPACITANCE CASE
FOR
TOL.
(μF)
CODE
DSCC
(± %)
06015 (1)
+25 °C
3.5
3.5
3.5
6.8
6.8
6.8
15
15
15
33
33
33
40
40
40
56
56
56
110
110
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0601H
0602H
0603H
0604H
0605H
0606H
0607H
0608H
0609H
0610H
0611H
0612H
0613H
0614H
0615H
0616H
0617H
0618H
0619H
0620H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
9.0
9.0
2.5
2.5
2.5
4.7
4.7
4.7
11
11
11
22
22
22
30
30
30
43
43
43
86
86
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T2
T3
T3
T3
T3
T3
T3
T4
T4
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
5
20
10
0621H
0622H
0623H
0624H
0625H
0626H
0627H
0628H
0629H
0630H
0631H
0632H
0633H
0634H
0635H
0636H
0637H
0638H
0639H
0640H
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
9.0
9.0
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
75 VDC AT +85 °C; 50 VDC AT +125 °C
2.0
1.25
650
2.0
1.25
650
2.0
1.25
650
2.0
1.75
300
2.0
1.75
300
2.0
1.75
300
5.0
3.0
150
5.0
3.0
150
5.0
3.0
150
10.0
5.0
90
10.0
5.0
90
10.0
5.0
90
12.0
4.5
60
12.0
4.5
60
12.0
4.5
60
17.0
5.5
60
17.0
5.5
60
17.0
5.5
60
36.0
6.0
29
36.0
6.0
29
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.0
1.0
950
2.0
1.0
950
2.0
1.0
950
2.0
1.5
500
2.0
1.5
500
2.0
1.5
500
4.0
2.5
200
4.0
2.5
200
4.0
2.5
200
9.0
3.75
100
9.0
3.75
100
9.0
3.75
100
12.0
3.5
80
12.0
3.5
80
12.0
3.5
80
17.0
4.25
70
17.0
4.25
70
17.0
4.25
70
36.0
5.0
30
36.0
5.0
30
-16
-16
-16
-20
-20
-20
-16
-16
-16
-24
-24
-24
-16
-16
-16
-28
-28
-28
-35
-35
+5
+5
+5
+8
+8
+8
+8
+8
+8
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+10.5
+20
+20
+6
+6
+6
+9
+9
+9
+9
+9
+9
+15
+15
+15
+12
+12
+12
+15
+15
+15
+20
+20
4.74
4.74
4.74
3.42
3.42
3.42
2.66
2.66
2.66
2.01
2.01
2.01
1.50
1.50
1.50
1.31
1.31
1.31
0.73
0.73
525
525
525
610
610
610
890
890
890
1000
1000
1000
1250
1250
1250
1335
1335
1335
1850
1850
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-16
-20
-20
-20
-25
-25
+7
+7
+7
+7
+7
+7
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+15
+15
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+8
+15
+15
5.31
5.31
5.31
4.24
4.24
4.24
3.02
3.02
3.02
2.26
2.26
2.26
1.55
1.55
1.55
1.31
1.31
1.31
0.77
0.77
505
505
505
565
565
565
835
835
835
965
965
965
1240
1240
1240
1335
1335
1335
1800
1800
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06015
MAX. DCL (μA) AT
PIN
CAP.
CAPACITANCE CASE
FOR
TOL.
(μF)
CODE
DSCC
(± %)
06015 (1)
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE
CHANGE (%) AT
MAX.
RIPPLE
MAX. ESR
CURRENT
MAX. DF MAX. IMP.
AT +25 °C
AT 85 °C
AT +25 °C AT -55 °C
120 Hz
40 kHz
(%)
()
-55 °C +85 °C +125 °C
() (2)
3 mA
RMS (3)
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7
T1
20
0641H
1.0
2.0
1.0
1250
-16
+7
+8
7.81
415
1.7
T1
10
0642H
1.0
2.0
1.0
1250
-16
+7
+8
7.81
415
1.7
T1
5
0643H
1.0
2.0
1.0
1250
-16
+7
+8
7.81
415
3.6
T1
20
0644H
1.0
2.0
1.35
600
-24
+7
+8
4.98
520
3.6
T1
10
0645H
1.0
2.0
1.35
600
-16
+7
+8
4.98
520
3.6
T1
5
0646H
1.0
2.0
1.35
600
-16
+7
+8
4.98
520
9.0
T2
20
0647H
1.0
5.0
2.5
240
-16
+7
+8
3.69
755
9.0
T2
10
0648H
1.0
5.0
2.5
240
-16
+7
+8
3.69
755
9.0
T2
5
0649H
1.0
5.0
2.5
240
-16
+7
+8
3.69
755
14
T2
20
0650H
1.0
7.0
3.0
167
-16
+7
+8
2.85
860
14
T2
10
0651H
1.0
7.0
3.0
167
-16
+7
+8
2.85
860
14
T2
5
0652H
1.0
7.0
3.0
167
-16
+7
+8
2.85
860
18
T3
20
0653H
2.0
9.0
2.5
129
-16
+7
+8
1.85
1130
18
T3
10
0654H
2.0
9.0
2.5
129
-16
+7
+8
1.85
1130
18
T3
5
0655H
2.0
9.0
2.5
129
-16
+7
+8
1.85
1130
25
T3
20
0656H
2.0
13.0
3.0
93
-16
+7
+8
1.59
1200
25
T3
10
0657H
2.0
13.0
3.0
93
-16
+7
+8
1.59
1200
25
T3
5
0658H
2.0
13.0
3.0
93
-16
+7
+8
1.59
1200
56
T4
20
0659 H
10.0
40.0
3.25
32
-25
+15
+15
0.77
1800
56
T4
10
0660H
10.0
40.0
3.25
32
-25
+15
+15
0.77
1800
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06016
MAX.. CAPACITANCE
MAX. DCL (μA) AT
CHANGE (%) AT
PIN
MAX. ESR
CAP.
MAX. DF MAX. IMP.
FOR
AT +25 °C
CAPACITANCE CASE
TOL.
AT +25 °C AT -55 °C
DSCC
120 Hz
(μF)
CODE
+85 °C
(± %)
(%)
()
-55 °C +85 °C +125 °C
06016 (1) +25 °C +125 °C
() (2)
220
220
820
820
1500
1500
2200
2200
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0177H
0178H
0179H
0180H
0181H
0182H
0183H
0184H
2
2
3
3
5
5
6
6
180
180
680
680
1500
1500
1800
1800
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0185H
0186H
0187H
0188H
0189H
0190H
0191H
0192H
2
2
3
3
5
5
7
7
150
150
560
560
1200
1200
1500
1500
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0193H
0194
0195H
0196H
0197H
0198H
0199H
0200H
2
2
3
3
5
5
7
7
100
100
390
390
820
820
1000
1000
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0201H
0202H
0203H
0204H
0205H
0206H
0207H
0208H
2
2
3
3
6
6
8
8
68
68
270
270
560
560
680
680
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0209H
0210H
0211H
0212H
0213H
0214H
0215H
0216H
2
2
3
3
7
7
8
8
6 VDC AT +85 °C; 4 VDC AT +125 °C
9
25
36
-64
9
25
36
-64
14
77.5
18
-88
14
77.5
18
-88
20
86
18
-90
20
86
18
-90
24
85
13
-90
24
85
13
-90
8 VDC AT +85 °C; 5 VDC AT +125 °C
9
20.5
45
-60
9
20.5
45
-60
14
65
22
-83
14
65
22
-83
20
85
18
-90
20
85
18
-90
25
69
14
-90
25
69
14
-90
10 VDC AT +85 °C; 7 VDC AT +125 °C
9
17
54
-55
9
17
54
-55
16
53
27
-77
16
53
27
-77
20
68.5
18
-88
20
68.5
18
-88
25
57
15
-88
25
57
15
-88
15 VDC AT +85 °C; 10 VDC AT +125 °C
9
15
72
-44
9
15
72
-44
16
37
31
-66
16
37
31
-66
24
55.5
22
-77
24
55.5
22
-77
32
46
17
-77
32
46
17
-77
25 VDC AT +85 °C; 15 VDC AT +125 °C
9
11
90
-40
9
11
90
-40
16
27.5
33
-62
16
27.5
33
-62
28
38
24
-72
28
38
24
-72
32
31.5
19
-72
32
31.5
19
-72
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS (3)
13
13
16
16
20
20
25
25
16
16
20
20
25
25
30
30
1.51
1.51
1.26
1.26
0.76
0.76
0.52
0.52
1000
1000
1500
1500
1900
1900
2300
2300
13
13
16
16
20
20
25
25
16
16
20
20
25
25
30
30
1.51
1.51
1.27
1.27
0.75
0.75
0.51
0.51
1000
1000
1500
1500
1900
1900
2300
2300
13
13
16
16
20
20
25
25
16
16
20
20
25
25
30
30
1.51
1.51
1.26
1.26
0.76
0.76
0.51
0.51
900
900
1450
1450
1850
1850
2300
2300
13
13
16
16
20
20
25
25
16
16
20
20
25
25
30
30
1.99
1.99
1.26
1.26
0.9
0.9
0.61
0.61
900
900
1450
1450
1800
1800
2300
2300
12
12
13
13
20
20
25
25
15
15
16
16
25
25
30
30
2.15
2.15
1.35
1.35
0.9
0.9
0.62
0.62
850
850
1400
1400
1750
1750
2100
2100
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06016
CAP.
CAPACITANCE CASE
TOL.
(μF)
CODE
(± %)
MAX.. CAPACITANCE
MAX. DCL (μA) AT
CHANGE (%) AT
PIN
MAX. ESR
MAX. DF MAX. IMP.
FOR
AT +25 °C
AT +25 °C AT -55 °C
DSCC
120 Hz
+85 °C
(%)
()
-55 °C +85 °C +125 °C
06016 (1) +25 °C +125 °C
() (2)
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS (3)
30 VDC AT +85 °C; 20 VDC AT +125 °C
56
T1
20
0217H
2
9
11
100
-38
12
15
2.61
800
56
T1
10
0218H
2
9
11
100
-38
12
15
2.61
800
220
T2
20
0219H
3
16
21
36
-60
13
16
1.27
1200
220
T2
10
0220H
3
16
21
36
-60
13
16
1.27
1200
470
T3
20
0221H
8
32
32
25
-65
20
25
0.91
1500
470
T3
10
0222H
8
32
32
25
-65
20
25
0.91
1500
560
T4
20
0223H
9
36
27.5
20
-65
25
30
0.65
2000
560
T4
10
0224H
9
36
27.5
20
-65
25
30
0.65
2000
700
50 VDC AT +85 °C; 30 VDC AT +125 °C
33
T1
20
0225H
2
9
6.15
135
-29
10
12
2.48
33
T1
10
0226H
2
9
6.15
135
-29
10
12
2.48
700
120
T2
20
0227H
4
24
11.3
49
-42
12
15
1.25
1200
120
T2
10
0228H
4
24
11.3
49
-42
12
15
1.25
1200
270
T3
20
0229H
8
32
18.5
29
-46
20
25
0.91
1450
270
T3
10
0230H
8
32
18.5
29
-46
20
25
0.91
1450
330
T4
20
0231H
9
36
19
22
-46
25
30
0.77
1900
330
T4
10
0232H
9
36
19
22
-46
25
30
0.77
1900
60 VDC AT +85 °C; 40 VDC AT +125 °C
27
T1
20
0233H
3
12
5.1
144
-24
10
12
2.51
700
27
T1
10
0234H
3
12
5.1
144
-24
10
12
2.51
700
100
T2
20
0235H
4
20
9.5
54
-36
12
15
1.26
1100
100
T2
10
0236H
4
20
9.5
54
-36
12
15
1.26
1100
220
T3
20
0237H
8
32
15
29
-40
16
20
0.91
1400
220
T3
10
0238H
8
32
15
29
-40
16
20
0.91
1400
270
T4
20
0239H
9
36
13.5
23
-45
20
25
0.67
1850
270
T4
10
0240H
9
36
13.5
23
-45
20
25
0.67
1850
75 VDC AT +85 °C; 50 VDC AT +125 °C
22
T1
20
0241H
3
12
4.25
157
-19
10
12
2.57
600
22
T1
10
0242H
3
12
4.25
157
-19
10
12
2.57
600
82
T2
20
0243H
4
24
7.6
63
-30
12
15
1.23
1000
82
T2
10
0244H
4
24
7.6
63
-30
12
15
1.23
1000
180
T3
20
0245H
9
36
12.2
30
-35
16
20
0.9
1300
180
T3
10
0246H
9
36
12.2
30
-35
16
20
0.9
1300
220
T4
20
0247H
10
40
18.5
24
-40
20
25
1.12
1800
220
T4
10
0248H
10
40
18.5
24
-40
20
25
1.12
1800
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
Revision: 20-Jul-15
Document Number: 40143
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 06013, DSCC 06014, DSCC 06015, DSCC 06016
www.vishay.com
Vishay
STANDARD RATINGS: DSCC 06016
CAP.
CAPACITANCE CASE
TOL.
(μF)
CODE
(± %)
MAX.. CAPACITANCE
MAX. DCL (μA) AT
CHANGE (%) AT
PIN
MAX. ESR
MAX. DF MAX. IMP.
FOR
AT +25 °C
AT +25 °C AT -55 °C
DSCC
120 Hz
+85 °C
(%)
()
-55 °C +85 °C +125 °C
06016 (1) +25 °C +125 °C
() (2)
10
10
39
39
68
68
120
120
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0249H
0250H
0251H
0252H
0253H
0254H
0255H
0256H
3
3
5
5
10
10
12
12
6.8
6.8
27
27
47
47
82
82
T1
T1
T2
T2
T3
T3
T4
T4
20
10
20
10
20
10
20
10
0257H
0258H
0259H
0260H
0261H
0262H
0263H
0264H
3
3
5
5
10
10
12
12
100 VDC AT +85 °C; 65 VDC AT +125 °C
12
2.25
200
-17
12
2.25
200
-17
24
5.2
80
-20
24
5.2
80
-20
40
5.65
40
-30
40
5.65
40
-30
48
12.5
30
-35
48
12.5
30
-35
125 VDC AT +85 °C; 85 VDC AT +125 °C
12
3
300
-14
12
3
300
-14
24
3.6
90
-18
24
3.6
90
-18
40
3.95
50
-26
40
3.95
50
-26
48
8.7
32
-30
48
8.7
32
-30
MAX.
RIPPLE
CURRENT
AT 85 °C
40 kHz
3 mA RMS (3)
10
10
12
12
14
14
15
15
12
12
15
15
16
16
17
17
2.99
2.99
1.77
1.77
1.11
1.11
1.38
1.38
800
800
1300
1300
1600
1600
2000
2000
10
10
12
12
14
14
15
15
12
12
15
15
16
16
17
17
5.86
5.86
1.77
1.77
1.12
1.12
1.41
1.41
700
700
1200
1200
1500
1500
1900
1900
Notes
(1) Dash number will include the letter “H” to indicate the vibration and shock requirements (i.e., 51 g random vibration, 80 g sinusoidal vibration
and 500 g shock).
(2) Maximum ESR is calculated by the following equation:
DF
ESR (max.) = -------------- , where
2  C
(3)
DF = maximum dissipation factor from Standard Ratings table 
f = 120 Hz
C = nominal capacitance
For ripple current limits at various temperatures, voltages, and frequencies, see Ripple Current table.
DSCC 06013, 06014, 06015, 06016 RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY,
TEMPERATURE AND APPLIED PEAK VOLTAGE
FREQUENCY OF
APPLIED RIPPLE
CURRENT
AMBIENT
STILL AIR
% OF
APPLIED
VOLTAGE
120 Hz
800 Hz
1 kHz
10 kHz
40 kHz
100 kHz
TEMP °C
TEMP °C
TEMP °C
TEMP °C
TEMP °C
TEMP °C
 55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125
100 % 0.60 0.39
-
-
0.71 0.43
-
-
0.72 0.46
-
-
0.88 0.55
-
-
1.0 0.63
-
-
1.1 0.69
-
-
90 %
0.60 0.46
-
-
0.71 0.55
-
-
0.72 0.55
-
-
0.88 0.67
-
-
1.0 0.77
-
-
1.1 0.85
-
-
80 %
0.60 0.52 0.35
-
0.71 0.62 0.42
-
0.72 0.62 0.42
-
0.88 0.76 0.52
-
1.0 0.87 0.59
-
1.1 0.96 0.65
-
70 %
0.60 0.58 0.44
-
0.71 0.69 0.52
-
0.72 0.70 0.52
-
0.88 0.85 0.64
-
1.0 0.97 0.73
-
1.1 1.07 0.80
-
66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50
Notes
1. At +125 °C the rated voltage of the capacitors decreases to 66 2/3 % of the +85 °C rated voltage.
2. The peak of the applied AC ripple voltage plus the applied DC voltage must not exceed the DC voltage rating of the capacitor either forward
or reverse.
3. The ripple current listed represents a rating calculated using a maximum internal temperature rise (T) of +50 °C at 40 kHz at +85 °C
ambient with a maximum peak rated voltage of 66 2/3 % of the +85 °C peak voltage rating.
4. The maximum allowable internal temperature rise (T) decreases linearly to a calculated +10 °C rise at +125 °C ambient.
5. The internal temperature rise is directly proportional to the equivalent series resistance of the capacitor and equivalent series
resistance increases with decreasing frequency.
Revision: 20-Jul-15
Document Number: 40143
18
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000