High Performance ASIC Cooling Solutions ATS Part#: ATS-56001-C4-R0 Description: maxiFLOW Heat Sink, NO TIM, RED-ANODIZED Heat Sink Type: maxiFLOW Heat Sink Attachment: THERMAL TAPE Equivalent Part Number: *Image above is for illustration purpose only. Features & Benefits maxiFLOW™ design features a low profile, spread fin array that maximizes surface area for more effective convection (air) cooling Designed specifically for ASIC package and their unique cooling requirements Also available with thermal interface material (TIM) applied to the base of the heat sink. Contact ATS for TIM options available. Thermal Performance @200 LFM @300 LFM @400 LFM @500 LFM @600 LFM @700 LFM @800 LFM 1.0 M/S 1.5 M/S 2.0 M/S 2.5 M/S 3.0 M/S 3.5 M/S 4.0 M/S Unducted Flow 5.30 °C/W 4.10 °C/W 3.40 °C/W 3.00 °C/W 2.70 °C/W 2.40 °C/W 2.20 °C/W Ducted Flow 3.30 n/a n/a n/a n/a n/a n/a AIR VELOCITY THERMAL RESISTANCE Product Detail Schematic Image Dimension A Dimension B Dimension C Dimension D TIM Finish 19.0 mm 19.0 mm 9.0 mm 26.0 mm NO TIM RED-ANODIZED Notes: Dimension A and B refer to heat sink length and width Dimension C is the heat sink height from the bottom of the base to the top of the fin field. Thermal performance data are provided for reference only. Actual performance may vary by application. ATS reserves the right to update or change its products without notice to improve the design or performance. ATS certifies that this heat sink assembly is RoHS-6 and REACH compliant. Contact ATS to learn about custom options available. *Image above is for illustration purpose only. For more information, to find a distributor or to place an order, please contact us at 781-769-2800 (North America), [email protected] or www.qats.com. © 2012 Advanced Thermal Solutions, Inc. | 89-27 Access Road | Norwood MA | 02062 | USA Rev - 121101