MKP479 Datasheet

MKP479
www.vishay.com
Vishay BCcomponents
AC and Pulse Polypropylene
Film Capacitors MKP Radial Epoxy Lacquered Type
FEATURES
l
l
w
seating
plane (1)
h
F'
(3)
F
lt
10
H
Ødt
A
P
•
•
•
•
•
h'
α∞
(2)
w
Ødt
15
Dimensions in mm
Hole Ø 1.0 for dt = 0.6 mm
Hole Ø 1.3 for dt = 0.8 mm
0 ≤ α < 50°
|F - F’| < 0.3 mm
F = 7.5 mm + 0.6 mm / - 0.1 mm
A = 2.0 mm + 1.0 mm / - 0.5 mm (pitch = 10.0 mm)
A = 2.5 mm + 1.4 mm / - 0.5 mm (pitch = 15.0 mm; 22.5 mm and 27.5 mm)
7.5 mm bent back pitch
10 mm to 27.5 mm lead pitch
Low contact resistance
Low loss dielectric
Supplied loose in box (including lock lead
versions) and taped on reel
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
CONSTRUCTION
Wound mono construction
CAPACITANCE RANGE (E24 SERIES)
0.01 μF to 3.9 μF
l
w
CAPACITANCE TOLERANCE
double
conical
hole
±5%
h
1.6
lt
> 0.5
A
Ødt
P
A
β β
ϒ ϒ
magnified view
direction A
β ≤ 15
Dimensions in mm
APPLICATIONS
Low losses due to low contact resistance and low loss
dielectric result in applications where high currents at high
frequency occur or high stability is preferred. Their small
dimensions make them suitable for circuits with high
packaging density.
RATED (DC) VOLTAGE
160 V; 250 V; 400 V; 630 V
RATED (AC) VOLTAGE
100 V; 160 V; 200 V
RATED PEAK-TO-PEAK VOLTAGE
280 V; 450 V; 560 V
CLIMATIC CATEGORY
55/105/56
RATED TEMPERATURE
MARKING
85 °C
Manufacturer’s emblem; C-value; tolerance; rated voltage;
manufacturer’s type designation; code for dielectric material
MAXIMUM APPLICATION TEMPERATURE
105 °C
DIELECTRIC
Polypropylene film
REFERENCE SPECIFICATIONS
IEC 60384-17
ELECTRODES
Metallized
PERFORMANCE GRADE
Grade 1 (long life)
COATING
Flame retardant epoxy material (UL-class 94 V-0)
STABILITY GRADE
Grade 2
LEADS
Tinned wire
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
[email protected]
Revision: 23-Nov-15
Document Number: 28123
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
0.1
2
1
3
10
4
100
5
TYPE AND PITCHES
15.0 mm / 7.5 mm
CAPACITANCE
(numerically; but not for lock lead)
10.0 mm
479
15.0 mm
22.5 mm
27.5 mm
Example:
104 = 10 x 10 = 100 nF
BFC2
479
XX
XX
X
2222 (*) 479
XX
XX
X
(*) old ordering number
PREFERRED TYPES
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL.
479
Loose in box
Lead length 5.0 mm ± 1.0 mm
Lock lead 4.0 mm + 1.0 mm / - 0.5 mm
Taped on reel
(bent back)
H = 16.0 mm, P0 = 15.0 mm;
reel diameter = 500 mm (1)
Loose in box
479
Taped on reel
Lead length 3.5 mm + 1.0 mm / - 0.5 mm
(pitch 10 mm and 15 mm)
Lead length 3.5 mm ± 0.5 mm
(pitch 22.5 mm and 27.5 mm)
H = 16.0 mm, P0 = 12.7 mm;
reel diameter = 500 mm
±5%
160 V
250 V
400 V
630 V
32
42
52
62
90
90
90
90
36
46
56
66
Dimensions of this code numbers stay
between brackets
ON REQUEST
34
44
54
64
35
45
55
65
±5%
Notes
(1) Small reel diameter = 356 mm is available on request
• For detailed tape specifications refer to packaging information www.vishay.com/doc?28139
Revision: 23-Nov-15
Document Number: 28123
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA (160 VDC)
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
C = 0.075 μF
 10 x 10-4
 25 x 10-4
0.075 μF < C ≤ 0.11 μF
 10 x 10-4
 30 x 10-4
0.11 μF < C ≤ 0.18 μF
 10 x
10-4
 35 x 10-4
0.18 μF < C ≤ 0.3 μF
 10 x 10-4
 40 x 10-4
0.3 μF < C ≤ 0.47 μF
 10 x
10-4
 60 x 10-4
0.47 μF < C ≤ 0.82 μF
 15 x
10-4
 90 x 10-4
0.82 μF < C ≤ 1.1 μF
 15 x 10-4
 100 x 10-4
1.1 μF < C ≤ 1.2 μF
 15 x
10-4
 120 x 10-4
1.2 μF < C ≤ 1.3 μF
 15 x
10-4
 125 x 10-4
1.3 μF < C ≤ 1.8 μF
 15 x 10-4
 135 x 10-4
1.8 μF < C ≤ 2.4 μF
 15 x
10-4
 145 x 10-4
2.4 μF < C ≤ 3.0 μF
 15 x 10-4
 155 x 10-4
3.0 μF < C ≤ 3.3 μF
 15 x
10-4
 165 x 10-4
3.3 μF < C ≤ 3.6 μF
 15 x
10-4
 175 x 10-4
3.6 μF < C ≤ 3.9 μF
 15 x 10-4
 185 x 10-4
Rated voltage pulse slope (dU/dt)R at 160 VDC:
P = 10 mm
60 V/μs
P = 15 mm
50 V/μs
P = 22.5 mm
25 V/μs
P = 27.5 mm
15 V/μs
R between leads, for C  1.0 μF at 100 V; 1 min
> 100 000 M
RC between leads, for C > 1 μF at 100 V; 1 min
> 100 000 s
R between leads and case; 100 V; 1 min
> 100 000 M
Ionization (AC) voltage (typical value) at 50 pC peak discharge
> 220 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s (1)
256 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
URDC = 160 V; URAC = 100 V; Up-p = 280 V (standard); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
SPQ
Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
32753
0.082
32823
0.10
0.9
SPQ
Pitch = 10.0 mm
32104
1000
1000
1000
900
32114
0.12
32124
0.13
32134
0.15
ORIGINAL
PITCH
32913
6.0 x 15.0 x 12.5
0.11
0.16
SPQ
Pitch = 7.5 mm (bent back)
0.075
0.091
PITCH 7.5 mm (BENT BACK)
6.5 x 15.5 x 12.5
Revision: 23-Nov-15
1.0
32154
32164
Document Number: 28123
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
PITCH 7.5 mm (BENT BACK)
SPQ
Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.18
0.20
0.22
6.0 x 15.0 (16.5) x 18.5
6.5 x 15.5 (17.0) x 18.5
1.2
1.3
SPQ
Pitch = 7.5 mm (bent back)
32184
32204
32224
2000
1500
36184
36204
36224
0.24
32244
36244
0.27
32274
36274
0.30
0.33
7.0 x 16.0 (17.5) x 18.5
1.4
32304
32334
1250
36304
36334
0.36
32364
0.39
32394
36394
0.43
32434
36434
0.47
0.51
0.56
7.5 x 16.5 (18.0) x 18.5
1.5
8.0 x 17.0 (18.5) x 18.5
1.6
32474
32514
32564
ORIGINAL
PITCH
SPQ
Pitch = 15.0 mm
800
1000
750
900
700
800
650
800
600
700
36364
1250
1250
36474
36514
36564
0.62
8.5 x 17.5 (19.0) x 18.5
1.7
32624
1000
36624
550
700
0.68
9.0 x 18.0 (19.5) x 18.5
1.8
32684
1000
36684
550
600
0.75
9.5 x 18.5 (20.0) x 18.5
1.9
32754
900
36754
500
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.82
0.91
1.0
1.1
1.2
1.3
1.5
1.6
1.8
7.0 x 20.0 x 26.0
1.8
7.5 x 20.5 x 26.0
1.9
8.0 x 21.0 x 26.0
2.0
8.5 x 21.5 x 26.0
2.1
9.5 x 22.5 x 26.0
2.4
10.0 x 23.0 x 26.0
2.5
Pitch = 7.5 mm (bent back)
32824
32914
32105
32115
32125
32135
32155
32165
32185
650
550
600
500
550
500
500
450
450
400
400
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
400
Pitch = 7.5 mm (bent back)
2.0
10.0 x 23.0 x 30.0
5.0
32205
2.2
10.5 x 23.5 x 30.0
5.0
32225
450
2.4
11.0 x 24.0 x 30.0
5.5
32245
400
2.7
11.5 x 24.5 x 30.0
5.5
32275
400
3.0
12.0 x 25.0 x 30.0
6.0
32305
350
3.3
13.0 x 26.0 x 30.0
6.5
32335
300
3.6
13.5 x 26.5 x 30.0
7.0
32365
300
3.9
14.0 x 27.0 x 30.0
7.0
32395
300
Revision: 23-Nov-15
600
Pitch = 22.5 mm
Pitch = 27.5 mm
450
Document Number: 28123
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
URDC = 160 V; URAC = 100 V; Up-p = 280 V (lock lead); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x hmax. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 4.0 mm + 1.0 mm / - 0.5 mm
SPQ
Pitch = 10.0 mm ± 1.0 mm; dt = 0.60 mm ± 0.06 mm
0.075
90089
0.082
90091
0.091
0.10
90092
6.0 x 18.0 x 12.5
0.9
90093
0.11
90094
0.12
90095
0.13
90096
0.15
90097
0.16
6.5 x 18.5 x 12.5
1.0
90098
1400
1250
Pitch = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.18
0.20
0.22
6.0 x 18.0 x 18.5
6.5 x 18.5 x 18.5
1.2
1.3
90099
90101
90102
0.24
90103
0.27
90104
0.30
0.33
7.0 x 19.0 x 18.5
1.4
90105
90106
0.36
90107
0.39
90108
0.43
90109
1500
1250
1250
7.5 x 19.5 x 18.5
1.5
8.0 x 20.0 x 18.5
1.6
0.62
8.5 x 20.5 x 18.5
1.7
90114
900
0.68
9.0 x 21.0 x 18.5
1.8
90115
800
0.75
9.5 x 21.5 x 18.5
1.9
90116
800
90117
850
0.47
0.51
0.56
90111
90112
90113
1000
1000
Pitch = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.82
0.91
1.0
1.1
1.2
1.3
1.5
1.6
1.8
7.0 x 23.0 x 26.0
1.8
7.5 x 23.5 x 26.0
1.9
8.0 x 24.0 x 26.0
2.0
8.5 x 24.5 x 26.0
2.1
9.5 x 25.5 x 26.0
2.4
10.0 x 26.0 x 26.0
2.5
90118
90119
90121
90122
90036
90037
90038
90039
750
700
650
550
500
Pitch = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
2.0
10.0 x 26.0 x 30.0
5.0
90041
400
2.2
10.5 x 26.5 x 30.0
5.0
90042
400
2.4
11.0 x 27.0 x 30.0
5.5
90123
350
2.7
11.5 x 27.5 x 30.0
5.5
90124
350
3.0
12.0 x 28.0 x 30.0
6.0
90125
350
3.3
13.0 x 29.0 x 30.0
6.5
90126
300
3.6
13.5 x 29.5 x 30.0
7.0
90127
250
3.9
14.0 x 30.0 x 30.0
7.0
90128
250
Revision: 23-Nov-15
Document Number: 28123
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA (250 VDC)
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.047 μF  C  0.075 μF
 10 x
10-4
 25 x 10-4
0.075 μF < C  0.11 μF
 10 x 10-4
 30 x 10-4
0.11 μF < C  0.18 μF
 10 x
10-4
 35 x 10-4
0.18 μF < C  0.30 μF
 10 x 10-4
 40 x 10-4
0.30 μF < C  0.47 μF
 10 x 10-4
 60 x 10-4
0.47 μF < C  0.82 μF
 15 x
10-4
 90 x 10-4
0.82 μF < C  1.1 μF
 15 x 10-4
 100 x 10-4
1.1 μF < C  1.2 μF
 15 x
10-4
 120 x 10-4
1.2 μF < C  1.3 μF
 15 x 10-4
 125 x 10-4
1.3 μF < C  1.8 μF
 15 x 10-4
 135 x 10-4
1.8 μF < C  2.4 μF
 15 x
10-4
 145 x 10-4
2.4 μF < C  3.0 μF
 15 x 10-4
 155 x 10-4
Rated voltage pulse slope (dU/dt)R:
P = 10.0 mm
70 V/μs
P = 15.0 mm
60 V/μs
P = 22.5 mm
30 V/μs
P = 27.5 mm
20 V/μs
R between leads, for C  1.0 μF at 100 V; 1 min
> 100 000 M
RC between leads, for C > 1 μF at 100 V; 1 min
> 100 000 s
R between leads and case; 100 V; 1 min
> 100 000 M
Ionization (AC) voltage (typical value) at 50 pC peak discharge
> 220 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
(1)
400 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
URDC = 250 V; URAC = 160 V; Up-p = 450 V (standard); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
SPQ
Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
42473
0.051
42513
0.056
42563
0.068
6.0 x 15.0 x 12.5
0.9
42623
42683
0.075
42753
0.082
42823
0.091
42913
0.10
6.5 x 15.5 x 12.5
Revision: 23-Nov-15
1.0
SPQ
Pitch = 7.5 mm (bent back)
0.047
0.062
PITCH 7.5 mm (BENT BACK)
42104
ORIGINAL
PITCH
SPQ
Pitch = 10.0 mm
1000
1000
1000
900
Document Number: 28123
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
PITCH 7.5 mm (BENT BACK)
SPQ
Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.11
SPQ
Pitch = 7.5 mm (bent back)
42114
42124
46124
0.13
42134
46134
0.16
6.5 x 15.5 (17.0) x 18.5
1.3
42154
42164
1500
46154
46164
0.18
42184
46184
0.20
42204
46204
0.22
42224
46224
0.24
0.27
0.30
0.33
0.36
0.39
7.0 x 16.0 (17.5) x 18.5
1.4
7.5 x 16.5 (18.0) x 18.5
1.5
8.0 x 17.0 (18.5) x 18.5
1.6
8.5 x 17.5 (19.0) x 18.5
1.7
42244
42274
42304
42334
42364
42394
SPQ
Pitch = 15.0 mm
46114
0.12
0.15
ORIGINAL
PITCH
1250
1250
150
1000
46244
46274
46304
46334
46364
46394
750
900
700
800
650
800
600
700
550
700
0.43
9.0 x 18.0 (19.5) x 18.5
1.8
42434
1000
46434
550
600
0.47
9.5 x 18.5 (20.0) x 18.5
1.9
42474
900
46474
500
600
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.51
Pitch = 7.5 mm (bent back)
42514
Pitch = 22.5 mm
7.0 x 20.0 x 26.0
1.8
7.5 x 20.5 x 26.0
1.9
0.75
8.0 x 21.0 x 26.0
2.0
42754
550
500
0.82
8.5 x 21.5 x 26.0
2.1
42824
500
450
0.91
9.0 x 22.0 x 26.0
2.4
42914
450
450
0.56
0.62
0.68
42564
42624
42684
650
550
600
500
1.0
9.5 x 22.5 x 26.0
2.5
42105
450
400
1.1
10.0 x 23.0 x 26.0
2.6
42115
400
400
1.2
10.5 x 23.5 x 26.0
2.7
42125
350
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
1.3
10.0 x 23.0 x 30.0
5.0
42135
450
1.5
10.5 x 23.5 x 30.0
5.0
42155
450
1.6
11.0 x 24.0 x 30.0
5.5
42165
400
1.8
11.5 x 24.5 x 30.0
5.5
42185
400
2.0
12.5 x 25.0 x 30.0
6.5
42205
350
2.2
13.0 x 26.0 x 30.0
6.5
42225
300
2.4
13.5 x 26.5 x 30.0
7.0
42245
300
2.7
14.0 x 27.0 x 30.0
7.0
42275
300
3.0
15.0 x 28.0 x 30.0
7.5
42305
250
Revision: 23-Nov-15
350
Pitch = 7.5 mm (bent back)
Pitch = 27.5 mm
Document Number: 28123
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
URdc = 250 V; URac = 160 V; Up-p = 450 V (lock lead); C-tol. = ± 5 %
C
(μF)
DIMENSIONS
wmax. x hmax. x lmax.
(mm)
MASS
(g)
Pitch = 10.0 mm ± 1.0 mm; dt = 0.60 ± 0.06 mm
0.047
0.051
0.056
0.062
6.0 x 18.0 x 12.5
0.9
0.068
0.075
0.082
0.091
0.10
6.5 x 18.5 x 12.5
1.0
Pitch = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.11
0.12
0.13
0.15
6.5 x 18.5 x 18.5
1.3
0.16
0.18
0.20
0.22
0.24
7.0 x 19.0 x 18.5
1.4
0.27
7.5 x 19.5 x 18.5
1.5
0.30
0.33
8.0 x 20.0 x 18.5
1.6
0.36
8.5 x 20.5 x 18.5
1.7
0.39
0.43
9.0 x 21.0 x 18.5
1.8
0.47
9.5 x 21.5 x 18.5
1.9
Pitch = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.51
7.0 x 23.0 x 26.0
1.8
0.56
0.62
7.5 x 23.5 x 26.0
1.9
0.68
0.75
8.0 x 24.0 x 26.0
2.0
0.82
8.5 x 24.5 x 26.0
2.1
0.91
9.0 x 25.0 x 26.0
2.4
1.0
9.5 x 25.5 x 26.0
2.5
1.1
10.0 x 26.0 x 26.0
2.6
1.2
10.5 x 26.5 x 26.0
2.7
Pitch = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
1.3
10.0 x 26.0 x 30.0
5.0
1.5
10.5 x 26.5 x 30.0
5.0
1.6
11.0 x 27.0 x 30.0
5.5
1.8
11.5 x 27.5 x 30.0
5.5
2.0
12.5 x 28.5 x 30.0
6.5
2.2
13.0 x 29.0 x 30.0
6.5
2.4
13.5 x 29.5 x 30.0
7.0
2.7
14.0 x 30.0 x 30.0
7.0
3.0
15.0 x 31.0 x 30.0
7.5
Revision: 23-Nov-15
CATALOG NUMBER BFC2479..... AND PACKAGING
LOOSE IN BOX
lt = 4.0 mm + 1.0 mm / - 0.5 mm
SPQ
90052
90129
90131
90132
90133
90134
90135
90136
90137
90138
90051
90139
90141
90142
90012
90013
90014
90015
90016
90017
90018
90019
90021
90022
90023
90024
90025
90026
90027
90028
90029
90031
90032
90033
90034
90143
90144
90145
90146
90147
90148
90149
90151
90152
1400
1250
1250
1250
1000
1000
900
800
800
850
750
700
650
600
550
500
500
400
400
350
350
300
300
250
250
200
Document Number: 28123
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA (400 VDC)
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
0.022 ≤ C  0.027
 10 x
10-4
 20 x 10-4
0.027 < C  0.075
 10 x 10-4
 25 x 10-4
0.075 μF < C  0.11 μF
 10 x
10-4
 30 x 10-4
0.11 μF < C  0.18 μF
 10 x 10-4
 35 x 10-4
0.18 μF < C  0.3 μF
 10 x 10-4
 40 x 10-4
0.3 μF < C  0.47 μF
 10 x
10-4
 60 x 10-4
0.47 μF < C  0.82 μF
 15 x 10-4
 90 x 10-4
0.82 μF < C  1.1 μF
 15 x
10-4
 100 x 10-4
1.1 μF < C  1.2 μF
 15 x 10-4
 120 x 10-4
Rated voltage pulse slope (dU/dt)R at 400 VDC:
P = 10.0 mm
80 V/μs
P = 15.0 mm
70 V/μs
P = 22.5 mm
35 V/μs
P = 27.5 mm
25 V/μs
R between leads, for C  1.0 μF at 100 V; 1 min
> 100 000 M
RC between leads, for C > 1.0 μF at 100 V; 1 min
> 100 000 s
R between leads and case; 100 V; 1 min
> 100 000 M
Ionization (AC) voltage (typical value) at 50 pC peak discharge
> 220 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
(1)
640 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
URDC = 400 V; URAC = 200 V; Up-p = 560 V (standard); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
MASS
(g)
LOOSE IN BOX
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
SPQ
Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
52223
0.024
52243
0.027
52273
0.030
52303
6.0 x 15.0 x 12.5
0.9
52333
0.036
52363
0.039
52393
0.043
52433
0.047
52473
Revision: 23-Nov-15
SPQ
Pitch = 7.5 mm (bent back)
0.022
0.033
PITCH 7.5 mm (BENT BACK)
1000
ORIGINAL
PITCH
SPQ
Pitch = 10.0 mm
1000
Document Number: 28123
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
MASS
(g)
LOOSE IN BOX
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
PITCH 7.5 mm (BENT BACK)
SPQ
Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
SPQ
Pitch = 7.5 mm (bent back)
0.051
52513
56513
0.056
52563
56563
0.062
0.068
6.5 x 15.5 (17.0) x 18.5
1.3
0.075
52623
52683
1500
56623
56683
52753
56753
0.082
52823
56823
0.091
52913
56913
0.10
0.11
7.0 x 16.0 (17.5) x 18.5
1.4
0.12
0.13
0.15
0.16
0.18
0.20
0.22
52104
52114
1250
52124
7.5 x 16.5 (18.0) x 18.5
1.5
8.0 x 17.0 (18.5) x 18.5
1.6
8.5 x 17.5 (19.0) x 18.5
1.7
9.0 x 18.0 (19.5) x 18.5
1.8
52134
52154
52164
52184
52204
6.5 x 19.5 x 26.0
1.7
0.27
7.0 x 20.0 x 26.0
1.8
0.30
0.33
0.36
0.39
7.5 x 20.5 x 26.0
1.9
8.0 x 21.0 x 26.0
2.0
56114
SPQ
Pitch = 15.0 mm
750
900
700
800
650
800
600
700
550
700
550
600
56124
1250
1250
1000
56134
56154
56164
56184
56204
52224
1000
52244
750
600
52274
650
550
600
500
550
500
500
450
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.24
56104
ORIGINAL
PITCH
56224
Pitch = 7.5 mm (bent back)
52304
52334
52364
52394
Pitch = 22.5 mm
8.5 x 21.5 x 26.0
2.1
0.47
9.0 x 22.0 x 26.0
2.4
52474
450
450
0.51
9.5 x 22.5 x 26.0
2.5
52514
450
400
0.56
10.0 x 23.0 x 26.0
2.6
52564
400
400
0.62
10.5 x 23.5 x 26.0
2.7
52624
350
350
0.43
52434
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
Pitch = 7.5 mm (bent back)
0.68
10.0 x 23.0 x 30.0
5.0
52684
450
0.75
10.5 x 23.5 x 30.0
5.0
52754
450
0.82
11.0 x 24.0 x 30.0
5.5
52824
400
0.91
11.5 x 24.5 x 30.0
5.5
52914
400
1.0
12.0 x 25.0 x 30.0
6.0
52105
350
1.1
12.5 x 25.5 x 30.0
6.5
52115
350
1.2
13.0 x 26.0 x 30.0
6.5
52125
300
Revision: 23-Nov-15
Pitch = 27.5 mm
Document Number: 28123
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
URDC = 400 V; URAC = 200 V; Up-p = 560 V (lock lead); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x hmax. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 4.0 mm + 1.0 mm / - 0.5 mm
SPQ
Pitch = 10.0 mm ± 1.0 mm; dt = 0.60 mm ± 0.06 mm
0.022
90153
0.024
90154
0.027
6.0 x 18.0 x 12.5
0.9
90155
0.030
90156
0.033
90157
0.036
90158
0.039
0.043
6.0 x 18.0 x 12.5
0.9
90159
90161
1400
1400
90162
0.047
Pitch = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.051
90163
0.056
90164
0.062
0.068
6.5 x 18.5 x 18.5
1.3
90165
90166
0.075
90167
0.082
90168
0.091
90169
0.10
0.11
7.0 x 19.0 x 18.5
1.4
0.15
0.16
0.18
0.20
0.22
90172
1250
90173
0.12
0.13
90171
1250
7.5 x 19.5 x 18.5
1.5
8.0 x 20.0 x 18.5
1.6
8.5 x 20.5 x 18.5
1.7
9.0 x 21.0 x 18.5
1.8
90174
90175
90176
90177
90178
90179
1000
1000
900
800
Pitch = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.24
6.5 x 22.5 x 26.0
1.7
90181
900
0.27
7.0 x 23.0 x 26.0
1.8
90182
850
7.5 x 23.5 x 26.0
1.9
8.0 x 24.0 x 26.0
2.0
0.30
0.33
0.36
0.39
0.43
0.47
8.5 x 24.5 x 26.0
2.1
9.0 x 25.0 x 26.0
2.4
90183
90184
90185
90186
90187
90188
750
700
650
600
0.51
9.5 x 25.5 x 26.0
2.5
90189
550
0.56
10.0 x 26.0 x 26.0
2.6
90191
500
0.62
10.5 x 26.5 x 26.0
2.7
90192
500
400
Pitch = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.68
10.0 x 26.0 x 30.0
5.0
90193
0.75
10.5 x 26.5 x 30.0
5.0
90194
400
0.82
11.0 x 27.0 x 30.0
5.5
90195
350
0.91
11.5 x 27.5 x 30.0
5.5
90196
350
350
1.0
12.0 x 28.0 x 30.0
6.0
90086
1.1
12.5 x 28.5 x 30.0
6.5
90197
300
1.2
13.0 x 29.0 x 30.0
6.5
90198
300
Revision: 23-Nov-15
Document Number: 28123
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
SPECIFIC REFERENCE DATA (630 VDC)
DESCRIPTION
Tangent of loss angle:
0.01 μF < C  0.027 μF
0.027 μF < C  0.075 μF
0.075 μF < C  0.11 μF
0.11 μF < C  0.18 μF
0.18 μF < C  0.3 μF
0.3 μF < C  0.47 μF
0.47 μF < C  0.68 μF
Rated voltage pulse slope (dU/dt)R at 630 VDC:
P = 10.0 mm
P = 15.0 mm
P = 22.5 mm
P = 27.5 mm
R between leads, for C  1.0 μF at 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s (1)
Withstanding (DC) voltage between leads and case
VALUE
at 10 kHz
 10 x 10-4
 10 x 10-4
 10 x 10-4
 10 x 10-4
 10 x 10-4
 10 x 10-4
 15 x 10-4
at 100 kHz
 20 x 10-4
 25 x 10-4
 30 x 10-4
 35 x 10-4
 40 x 10-4
 60 x 10-4
 90 x 10-4
100 V/μs
90 V/μs
45 V/μs
30 V/μs
> 100 000 M
> 100 000 M
> 220 V
1008 V; 1 min
2840 V; 1 min
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
URDC = 630 V; URAC = 200 V; Up-p = 560 V (standard); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
SPQ
Pitch = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm
0.010
0.011
0.012
0.013
0.015
6.0 x 15.0 x 12.5
0.9
0.016
0.018
0.020
0.022
0.024
0.027
6.5 x 15.5 x 12.5
1.0
Pitch = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
0.030
0.033
0.036
0.039
6.5 x 15.5 (17.0) x 18.5
1.3
0.043
0.047
0.051
0.056
0.062
7.0 x 16.0 (17.5) x 18.5
1.4
0.068
7.5 x 16.5 (18.0) x 18.5
1.5
0.075
8.0 x 17.0 (18.5) x 18.5
1.6
0.082
0.091
8.5 x 17.5 (19.0) x 18.5
1.7
0.10
9.0 x 18.0 (19.5) x 18.5
1.8
0.11
9.5 x 18.5 (20.0) x 18.5
1.9
Revision: 23-Nov-15
62103
62113
62123
62133
62153
62163
62183
62203
62223
62243
62273
62303
62333
62363
62393
62433
62473
62513
62563
62623
62683
62753
62823
62913
62104
62114
PITCH 7.5 mm (BENT BACK)
SPQ
Pitch = 7.5 mm (bent back)
1000
1250
1250
1250
1000
1000
900
SPQ
Pitch = 10.0 mm
1000
1000
1500
ORIGINAL
PITCH
Pitch = 7.5 mm (bent back)
66303
66333
66363
66393
750
66433
66473
66513
66563
66623
700
66683
650
66753
600
66823
66913
550
66104
550
66114
500
900
Pitch = 15.0 mm
900
800
800
700
700
600
600
Document Number: 28123
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x h (h’)max. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 5.0 mm ± 1.0 mm
REEL
ALL
LEADS
PITCH 7.5 mm (BENT BACK)
SPQ
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
SPQ
Pitch = 7.5 mm (bent back)
ORIGINAL
PITCH
SPQ
Pitch = 10.0 mm
0.12
6.5 x 19.5 x 26.0
1.7
62124
750
600
0.13
7.0 x 20.0 x 26.0
1.8
62134
650
550
7.5 x 20.5 x 26.0
1.9
600
500
0.18
8.0 x 21.0 x 26.0
2.0
62184
550
500
0.20
8.5 x 21.5 x 26.0
2.1
62204
500
450
450
450
0.15
0.16
0.22
0.24
9.0 x 22.0 x 26.0
2.4
62154
62164
62224
62244
0.27
9.5 x 22.5 x 26.0
2.5
62274
450
400
0.30
10.0 x 23.0 x 26.0
2.7
62304
400
400
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm
Pitch = 7.5 mm (bent back)
0.33
9.5 x 22.5 x 30.0
5.0
62334
550
0.36
10.0 x 22.5 x 30.0
5.0
62364
500
0.39
10.5 x 23.0 x 30.0
5.0
62394
450
0.43
11.0 x 23.0 x 30.0
5.5
62434
450
0.47
11.5 x 24.5 x 30.0
5.5
62474
400
0.51
12.0 x 25.0 x 30.0
6.0
62514
350
0.56
13.0 x 26.0 x 30.0
6.5
62564
300
0.62
13.5 x 26.5 x 30.0
6.5
62624
300
0.68
14.0 x 27.0 x 30.0
7.0
62684
300
Pitch = 10.0 mm
URDC = 630 V; URAC = 200 V; Up-p = 560 V (lock lead); C-tol. = ± 5 %
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x hmax. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 4.0 mm + 1.0 mm / - 0.5 mm
SPQ
Pitch = 10.0 mm ± 1.0 mm; dt = 0.60 mm ± 0.06 mm
0.010
90199
0.011
90201
0.012
90202
0.013
90203
0.015
0.016
6.0 x 18.0 x 12.5
0.9
90204
90205
0.018
90206
0.020
90207
0.022
90208
0.024
0.027
1400
90209
6.5 x 18.5 x 12.5
Revision: 23-Nov-15
1.0
90211
1250
Document Number: 28123
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
CATALOG NUMBER BFC2479..... AND PACKAGING
C
(μF)
DIMENSIONS
wmax. x hmax. x lmax.
(mm)
LOOSE IN BOX
MASS
(g)
lt = 4.0 mm + 1.0 mm / - 0.5 mm
SPQ
Pitch = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.030
90212
0.033
90213
0.036
90214
0.039
0.043
6.5 x 18.5 x 18.5
1.3
90215
90216
0.047
90217
0.051
90218
1250
90219
0.056
0.062
7.0 x 19.0 x 18.5
1.4
90221
1250
0.068
7.5 x 19.5 x 18.5
1.5
90222
1000
8.0 x 20.0 x 18.5
1.6
0.075
0.082
90223
90224
1000
0.091
8.5 x 20.5 x 18.5
1.7
90225
900
0.10
9.0 x 21.0 x 18.5
1.8
90226
800
0.11
9.5 x 21.5 x 18.5
1.9
90227
800
Pitch = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.12
6.5 x 22.5 x 26.0
1.7
90228
900
0.13
7.0 x 23.0 x 26.0
1.8
90229
850
7.5 x 23.5 x 26.0
1.9
0.18
8.0 x 24.0 x 26.0
2.0
90233
700
0.20
8.5 x 24.5 x 26.0
2.1
90234
650
9.0 x 25.0 x 26.0
2.4
0.27
9.5 x 25.5 x 26.0
2.5
90237
550
0.30
10.0 x 26.0 x 26.0
2.7
90238
500
90239
450
0.15
0.16
0.22
0.24
90231
90232
90235
90236
750
600
Pitch = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm
0.33
9.5 x 25.5 x 30.0
5.0
0.36
10.0 x 25.5 x 30.0
5.0
90241
450
0.39
10.5 x 26.0 x 30.0
5.0
90242
400
0.43
11.0 x 26.0 x 30.0
5.5
90243
400
0.47
11.5 x 27.5 x 30.0
5.5
90244
350
0.51
12.0 x 28.0 x 30.0
6.0
90245
350
0.56
13.0 x 29.0 x 30.0
6.5
90246
300
0.62
13.5 x 29.5 x 30.0
6.5
90247
250
0.68
14.0 x 30.0 x 30.0
7.0
90248
250
Revision: 23-Nov-15
Document Number: 28123
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
Vishay BCcomponents
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
AC voltage
(V)
103
AC voltage
(V)
103
102
102
nF
0
10 nF
0
22 nF
0 F
47 0 n
0
10 nF
00 F
22 00 n
39
105
f (Hz) 106
103
103
AC voltage
(V)
104
85 °C < Tamb ≤ 105 °C, 160 VDC
101
102
AC voltage
(V)
103
nF
0
10 nF
0
22 nF
0 F
47 0 n
0
10
nF
00 F
22 00 n
39
Tamb ≤ 85 °C, 160 VDC
101
102
102
102
103
103
104
105
f (Hz)
106
106
101
102
103
104
105
f (Hz)
106
105
f (Hz) 106
103
AC voltage
(V)
AC voltage
(V)
103
nF
22
nF
F
47 0 n
nF
10
0
F
22 0 n F
47 0 n
0
10
102
102
nF
22
nF
47 0 nF
F
10 0 n F
22 0 n F
47 0 n
0
10
Tamb ≤ 85 °C, 400 VDC
101
102
f (Hz)
nF
47
F
n
0
10 0 nF
F
22 0 n F
47 0 n
0
10
nF
00
22
nF
47
nF
0
F
10 0 n F
22 0 n F
47 0 n
0
10
nF
00
22
1
102
105
85 °C < Tamb ≤ 105 °C, 250 VDC
Tamb ≤ 85 °C, 250 VDC
10
104
103
Revision: 23-Nov-15
85 °C < Tamb ≤ 105 °C, 400 VDC
104
105
f (Hz) 106
101
102
103
104
Document Number: 28123
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP479
www.vishay.com
AC voltage
(V)
102
102
85 °C < Tamb ≤ 105 °C, 630 VDC
Tamb ≤ 85 °C, 630 VDC
101
103
104
105
106
f (Hz)
107
CAPACITANCE
101
103
104
105
106
f (Hz)
107
IMPEDANCE
4
102
Impedance
(Ω)
ΔC/C
(%)
2
nF
10
nF F
22 7 n F
4 0n F
10 0 n F
22 0 n
47
103
nF
10 nF
22 nF
F
47 0 n F
10 20 n
2
nF
0
47
103
AC voltage
(V)
Vishay BCcomponents
typical
0
100
max.
-2
10-1
-4
-2
10 nF
100 nF
10
1.0 µF
3.3 µF
min.
-6
-50
Revision: 23-Nov-15
0
50
Tamb (°C) 100
10-3 4
10
105
106
107
f (Hz)
108
Document Number: 28123
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000