MKT373 www.vishay.com Vishay BCcomponents DC Film Capacitors MKT Radial Potted Type FEATURES • 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and coupling, bypass and energy reservoir QUICK REFERENCE DATA Capacitance tolerance ± 10 %, ± 5 % Capacitance range (E12 series) 0.047 μF to 15 μF Rated DC voltage 100 V, 250 V, 400 V, 630 V Rated AC voltage 63 V, 160 V, 220 V, 250 V Climatic testing class (according to IEC 60068-1) 55/105/56 Rated temperature 85 °C Maximum application temperature 105 °C Performance grade Grade 1 (long life) Leads Tinned wire Reference standards IEC 60384-2 Dielectric Polyester film Electrodes Metallized Mono construction Construction Encapsulation Flame retardant plastic case and epoxy resin (UL-class 94 V-0) C-value; tolerance; rated voltage; manufacturer’s symbol; year and week of manufacturer; manufacturer’s type Marking Note • For more detailed data and test requirements, contact [email protected] DIMENSIONS w l h lt P Revision: 27-Aug-15 Ø dt Document Number: 28193 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES CAPACITANCE (numerically) 15.0 mm 373 MULTIPLIER (nF) 22.5 mm 0.1 2 27.5 mm 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF BFC2 2222 (*) 373 373 XX XX YY YY Y Y (*) Old ordering number TYPE 373 compact 373 standard PACKAGING LEAD CONFIGURATION Loose in box Lead length 5.0 mm ± 1.0 mm Taped on reel (1) PREFERRED TYPES 250 V 400 V 43 53 44 54 C-TOL. ± 10 % ±5% 100 V 23 24 H (1) = 18.5 mm P0 = 12.7 mm Reel diameter = 356 mm ± 10 % 27 ±5% 28 Loose in box Lead length 5.0 mm ± 1.0 mm ± 10 % 21 ±5% 22 42 52 Taped on reel (1) H (1) = 18.5 mm P0 = 12.7 mm Reel diameter = 356 mm ± 10 % 25 45 55 ±5% 26 46 56 47 630 V 63 64 57 67 48 58 68 41 51 - Note (1) For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA DESCRIPTION Tangent of loss angle: C 0.1 μF 0.1 μF < C 0.47 μF 0.47 μF < C 1.0 μF 1.0 μF < C 10 μF C > 10 μF Rated voltage pulse slope (dU/dt)R at P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 μF at 100 V; 1 min at 500 V; 1 min RC between leads, for C > 0.33 μF at 100 V; 1 min at 500 V; 1 min R between interconnecting leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s Withstanding (DC) voltage between leads and case Maximum application temperature VALUE at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 100 VDC 14 V/μs 5 V/μs 4 V/μs > 15 000 M at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 250 VDC 16 V/μs 7 V/μs 6 V/μs 400 VDC 34 V/μs 14 V/μs 12 V/μs > 15 000 M > 30 000 M at 100 kHz 250 x 10-4 300 x 10-4 630 VDC 90 V/μs 35 V/μs 30 V/μs > 30 000 M > 5000 s > 10 000 s > 10 000 s > 10 000 s > 30 000 M 160 V; 1 min 400 V; 1 min 640 V; 1 min 1008 V; 1 min 200 V; 1 min 500 V; 1 min 800 V; 1 min 1260 V; 1 min 105 °C Note (1) See “Voltage Proof Test for Metallized Film Capacitors”: www.vishay.com/doc?28169 Revision: 27-Aug-15 Document Number: 28193 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents ELECTRICAL DATA - COMPACT SIZE CATALOG NUMBER BFC2 373 XXYYY AND PACKAGING REEL (1)(2) LOOSE IN BOX URDC (V) DIMENSIONS wxhxl (mm) CAP. (μF) MASS (g) (3) lt = 5.0 mm ± 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-TOL. = ± 10 % C-TOL. = ± 5 % C-TOL. = ± 10 % C-TOL. = ± 5 % XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C-VALUE ..YYY URAC = 63 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.33 334 0.39 394 0.47 474 0.56 564 0.68 5.0 x 11.0 x 17.5 0.82 100 1.1 23... (1000) 24... (1000) 27... (1100) 28... (1100) 684 824 1.0 105 1.2 125 1.5 155 1.8 185 2.2 6.0 x 12.0 x 17.5 1.5 23... (1000) 24... (1000) 27... (900) 28... (900) 225 URAC = 63 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 2.7 3.3 3.9 4.7 7.0 x 13.5 x 17.5 2.0 23... (1000) 24... (1000) 27... (800) 28... (800) 275 8.5 x 15.0 x 17.5 2.7 23... (1000) 24... (1000) 27... (650) 28... (650) 395 335 475 URAC = 160 V; PITCH = 15.0 mm ± 0.40 mm; dt = 0.60 mm ± 0.06 mm 0.15 154 0.18 184 0.22 5.0 x 11.0 x 17.5 1.1 43... (1000) 44... (1000) 47... (1100) 48... (1100) 224 0.27 274 0.32 334 0.39 6.0 x 12.0 x 17.5 0.47 1.5 43... (1000) 44... (1000) 47... (900) 48... (900) 394 474 URAC = 160 V; PITCH = 15.0 mm ± 0.40 mm; dt = 0.80 mm ± 0.08 mm 0.56 7.0 x 13.5 x 17.5 0.68 0.82 250 8.5 x 15.0 x 17.5 1.0 1.2 10.0 x 16.5 x 17.5 2.0 43... (1000) 44... (1000) 47... (800) 48... (800) 564 2.7 43... (1000) 44... (1000) 47... (650) 48... (650) 824 3.5 43... (500) 44... (500) 47... (600) 48... (600) 684 105 125 URAC = 160 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 1.5 8.5 x 18.0 x 26.0 1.8 2.2 2.7 10.0 x 19.5 x 26.0 4.5 43... (200) 44... (200) 47... (450) 48... (450) 155 5.7 43... (200) 44... (200) 47... (350) 48... (350) 225 335 185 275 URAC = 160 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 3.3 3.9 4.7 11.0 x 21.0 x 31.0 8.2 43... (100) 44... (100) - - 13.0 x 23.0 x 31.0 10.2 43... (100) 44... (100) - - Revision: 27-Aug-15 395 475 Document Number: 28193 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents ELECTRICAL DATA - COMPACT SIZE CATALOG NUMBER BFC2 373 XXYYY AND PACKAGING REEL (1)(2) LOOSE IN BOX URDC (V) DIMENSIONS wxhxl (mm) CAP. (μF) MASS (g) (3) lt = 5.0 mm ± 1.0 mm C-TOL. = ± 10 % C-TOL. = ± 5 % H = 18.5 mm; P0 = 12.7 mm C-TOL. = ± 10 % XX XX XX (SPQ) (SPQ) (SPQ) URAC = 220 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 400 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 630 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 5.0 x 11.0 x 17.5 1.1 53... (1000) 54... (1000) 57... (1100) 53... 54... 57... (1000) (1000) (900) URAC = 220 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 53... 54... 57... 7.0 x 13.5 x 17.5 2.0 (1000) (1000) (800) 53... 54... 57... 8.5 x 15.0 x 17.5 2.7 (1000) (1000) (650) 53... 54... 57... 10.0 x 16.5 x 17.5 3.5 (500) (500) (600) URAC = 220 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 53... 54... 57... 8.5 x 18.0 x 26.0 4.5 (200) (200) (450) 53... 54... 57... 10.0 x 19.5 x 26.0 5.7 (200) (200) (350) URAC = 220 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 53... 54... 11.0 x 21.0 x 31.0 8.2 (100) (100) 53... 54... 13.0 x 23.0 x 31.0 10.2 (100) (100) URAC = 250 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 63... 64... 67... 5.0 x 11.0 x 17.5 1.1 (1000) (1000) (1100) 63... 64... 67... 6.0 x 12.0 x 17.5 1.5 (1000) (1000) (900) URAC = 250 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 63... 64... 67... 7.0 x 13.5 x 17.5 2.0 (1000) (1000) (800) 63... 64... 67... 8.5 x 15.0 x 17.5 2.7 (1000) (1000) (650) 63... 64... 67... 10.0 x 16.5 x 17.5 3.5 (500) (500) (600) URAC = 250 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 63... 64... 67... 8.5 x 18.0 x 26.0 4.5 (200) (200) (450) 63... 64... 67... 10.0 x 19.5 x 26.0 5.7 (200) (200) (350) URAC = 250 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 63... 64... 11.0 x 21.0 x 31.0 8.2 (100) (100) 63... 64... 13.0 x 23.0 x 31.0 10.2 (100) (100) 63... 64... 15.0 x 25.0 x 31.5 13.4 (100) (100) 6.0 x 12.0 x 17.5 1.5 C-VALUE C-TOL. = ± 5 % XX (SPQ) 58... (1100) 58... (900) ..YYY 473 563 683 823 104 124 154 184 224 58... (800) 58... (650) 58... (600) 274 334 394 474 58... (450) 58... (350) 684 824 105 125 - 155 - 185 225 68... (1100) 68... (900) 473 563 683 823 68... (800) 68... (650) 68... (600) 104 124 154 184 68... (450) 68... (350) 274 334 394 474 - 564 - 684 824 564 224 105 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (3) Weight for short lead product only Revision: 27-Aug-15 Document Number: 28193 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents ELECTRICAL DATA - STANDARD SIZE CATALOG NUMBER BFC2 373 XXYYY AND PACKAGING REEL (1)(2) LOOSE IN BOX URDC (V) DIMENSIONS wxhxl (mm) C (μF) MASS (g) (3) lt = 5.0 mm ± 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-TOL. = ± 10 % C-TOL. = ± 5 % C-TOL. = ± 10 % C-TOL. = ± 5 % XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C-VALUE ..YYY URAC = 63 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.33 0.39 0.47 0.56 0.68 0.82 1.00 5.0 x 11.0 x 17.5 1.1 21... (1000) 22... (1000) 25... (1100) 26... (1100) 6.0 x 12.0 x 17.5 1.5 21... (1000) 22... (1000) 25... (900) 26... (900) 334 394 474 564 684 824 105 URAC = 63 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 100 1.2 1.5 1.8 2.2 7.0 x 13.5 x 17.5 2.0 21... (1000) 22... (1000) 25... (800) 26... (800) 8.5 x 15.0 x 17.5 2.7 21... (1000) 22... (1000) 25... (650) 26... (650) 125 155 185 225 URAC = 63 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 2.7 3.3 3.9 4.7 8.5 x 18.0 x 26.0 4.5 21... (200) 22... (200) 25... (450) 26... (450) 10.0 x 19.5 x 26.0 5.7 21... (200) 22... (200) 25... (350) 26... (350) 275 335 395 475 URAC = 63 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 5.6 6.8 8.2 10 12 15 11.0 x 21.0 x 31.0 8.2 21... (100) 22... (100) - - 13.0 x 23.0 x 31.0 10.2 21... (100) 22... (100) - - 18.0 x 28.0 x 31.5 18.4 21... (100) 22... (100) - - 565 685 825 106 126 156 URAC = 160 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 0.15 0.18 0.22 0.27 0.33 0.39 0.47 5.0 x 11.0 x 17.5 1.1 41... (1000) 42... (1000) 45... (1100) 46... (1100) 6.0 x 12.0 x 17.5 1.5 41... (1000) 42... (1000) 45... (900) 46... (900) 154 184 224 274 334 394 474 URAC = 160 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 250 0.56 0.68 0.82 1.0 7.0 x 13.5 x 17.5 2.0 41... (1000) 42... (1000) 45... (800) 46... (800) 8.5 x 15.0 x 17.5 2.7 41... (1000) 42... (1000) 45... (650) 46... (650) 564 684 824 105 URAC = 160 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 1.2 1.5 1.8 2.2 8.5 x 18.0 x 26.0 4.5 41... (200) 42... (200) 45... (450) 46... (450) 10.0 x 19.5 x 26.0 5.7 41... (200) 42... (200) 45... (350) 46... (350) 125 155 185 225 URAC = 160 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 2.7 3.3 3.9 4.7 13.0 x 23.0 x 31.0 10.2 41... (100) 42... (100) - - 15.0 x 28.0 x 31.5 13.4 41... (100) 42... (100) - - Revision: 27-Aug-15 275 335 395 475 Document Number: 28193 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents ELECTRICAL DATA - STANDARD SIZE CATALOG NUMBER BFC2 373 XXYYY AND PACKAGING REEL (1)(2) LOOSE IN BOX URDC (V) DIMENSIONS wxhxl (mm) C (μF) MASS (g) (3) lt = 5.0 mm ± 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-TOL. = ± 10 % C-TOL. = ± 5 % C-TOL. = ± 10 % C-TOL. = ± 5 % XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C-VALUE ..YYY URAC = 220 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 473 0.047 0.056 563 0.068 5.0 x 11.0 x 17.5 1.1 51... (1000) 52... (1000) 55... (1100) 56... (1100) 0.082 683 823 0.10 104 0.12 56... (900) 124 6.0 x 12.0 x 17.5 1.5 0.15 51... (1000) 52... (1000) 55... (900) 154 URAC = 220 V; PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.18 7.0 x 13.5 x 17.5 2.0 0.22 400 0.27 8.5 x 15.0 x 17.5 2.7 0.33 51... (1000) 52... (1000) 55... (800) 56... (800) 184 51... (1000) 52... (1000) 55... (650) 56... (650) 274 224 334 URAC = 220 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.39 8.5 x 18.0 x 26.0 4.5 0.47 0.56 10.0 x 19.5 x 26.0 5.7 0.68 51... (200) 52... (200) 55... (450) 56... (450) 394 51... (200) 52... (200) 55... (350) 56... (350) 564 474 684 URAC = 220 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.82 13.0 x 23.0 x 31.0 10.2 1.0 1.2 15.0 x 25.0 x 31.5 1.5 13.4 824 51... (100) 52... (100) - 51... (100) 52... (100) - 105 125 125 Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (3) Weight for short lead product only Revision: 27-Aug-15 Document Number: 28193 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents ELECTRICAL DATA - AVAILABLE ON REQUEST CATALOG NUMBER BFC2 373 XXYYY AND PACKAGING URDC (V) DIMENSIONS wxhxl (mm) C (μF) MASS (g) (3) REEL (1)(2) LOOSE IN BOX lt = 5.0 mm ± 1.0 mm C-TOL. = ± 10 % C-TOL. = ± 5 % H = 18.5 mm SPQ C-TOL. = ± 10 % C-TOL. = ± 5 % SPQ URAC = 63 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 1.5 100 6.0 x 15.5 x 26.0 1.8 7.0 x 16.5 x 26.0 2.2 2.7 3.3 90012 90013 90022 90023 90002 90003 300 200 90018 90019 90028 90029 90008 90009 600 550 URAC = 63 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 4.7 9.0 x 19.0 x 31.0 6.1 90032 90033 100 - URAC = 160 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.47 0.56 250 6.0 x 15.5 x 26.0 2.7 90042 90046 90052 90053 300 90048 90049 90058 90059 0.68 90062 90063 90068 90069 0.82 90072 90073 90078 90079 90082 90083 90088 90089 7.0 x 16.5 x 26.0 1.0 3.3 200 600 550 URAC = 160 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 1.2 1.5 1.8 2.2 9.0 x 19.0 x 31.5 6.1 9.0 x 21.0 x 31.0 8.2 90172 90173 90092 90093 90102 90103 90112 90113 100 - 100 - URAC = 220 V; PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.22 400 0.27 0.33 6.0 x 15.5 x 26.0 2.7 7.0 x 16.5 x 26.0 3.3 90122 90123 90132 90133 90142 90143 300 200 90128 90129 90138 90139 90148 90149 600 550 URAC = 220 V; PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 0.68 9.0 x 19.0 x 31.5 6.1 90152 90153 100 - Notes • SPQ = Standard Packing Quantity (1) Reel diameter = 356 mm is available on request (2) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (3) Weight for short lead product only Revision: 27-Aug-15 Document Number: 28193 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit board: • For pitches 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements On Printed-Circuit Board The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawing: • For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm • For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm and h = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Wmax. = W + Δ Eccentricity Imax. = I + Δ CBA116 hmax. = h + Δ Seating plane SOLDERING For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 27-Aug-15 Document Number: 28193 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents CHARACTERISTICS 2 1 kHz C/C (%) ΔC/C (%) 6 4 1 b. 100 V series c. 250 V series d. 400 V and 630 V series 2 d 0 max. c typical b 0 -1 -2 -2 -4 min. -3 102 103 104 f (Hz) 105 -6 - 60 Capacitance as a function of frequency 60 Tamb (°C) 100 20 Capacitance as a function of ambient temperature 1.2 102 Impedance (Ω) factor - 20 1 40 0V ;5 6n F 101 25 0.8 10 0V ;2 .2 0V ;1 100 µF 5µ F 0.6 10-1 0.4 10-2 0.2 0.0 - 60 - 20 20 10-3 104 60 Tamb (°C) 100 Max. DC and AC voltage as a function of temperature 102 105 106 107 f (Hz) 108 f (Hz) 105 Impedance as a function of frequency 102 Compact size AC Voltage (V) AC Voltage (V) Compact size 47 0 2. 101 2 15 µF nF 101 µF 47 0 2. 2 15 Tamb ≤ 85 °C, 100 VDC µF nF µF Tamb ≤ 85 °C, 100 VDC 100 100 101 102 103 104 f (Hz) Max. AC voltage as a function of frequency Revision: 27-Aug-15 105 101 102 103 104 Max. AC voltage as a function of frequency Document Number: 28193 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents 103 103 102 10 Compact size AC Voltage (V) AC Voltage (V) Compact size 102 15 0 1.0 nF 4.7 F F 1 101 15 0n F 1.0 4.7 F F Tamb ≤ 85 °C, 250 VDC 85 °C < Tamb ≤ 105 °C, 250 VDC 100 100 101 102 103 104 f (Hz) 101 105 Max. AC voltage as a function of frequency 102 103 104 f (Hz) 105 Max. AC voltage as a function of frequency 103 103 Compact size AC Voltage (V) AC Voltage (V) Compact size 102 102 47 nF 47 1.5 0 nF µF 101 47 nF 47 1.5 0 nF µF 101 Tamb ≤ 85 °C, 400 VDC 85 °C < Tamb ≤ 105 °C, 400 VDC 100 100 101 102 103 104 f (Hz) 101 105 Max. AC voltage as a function of frequency 102 103 104 f (Hz) 105 Max. AC voltage as a function of frequency 103 103 Compact size AC Voltage (V) AC Voltage (V) Compact size 102 102 56 22 nF 1.0 0 nF µF 101 56 22 nF 1.0 0 nF µF 101 Tamb ≤ 105 °C, 630 VDC 85 °C < Tamb ≤ 105 °C, 630 VDC 100 100 101 102 103 104 f (Hz) Max. AC voltage as a function of frequency Revision: 27-Aug-15 105 101 102 103 104 f (Hz) 105 Max. AC voltage as a function of frequency Document Number: 28193 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com 102 Vishay BCcomponents 102 nF 0 33 101 nF 7 F 4. .0 µ 1 Tamb ≤ 85 °C, 100 VDC nF nF 7 F 4. .0 n 1 101 Standard size AC Voltage (V) 0 33 AC Voltage (V) Standard size 85 °C < Tamb ≤ 85 °C, 105 VDC 100 100 101 102 103 104 f (Hz) 101 105 Max. AC voltage as a function of frequency 102 104 f (Hz) 105 Max. AC voltage as a function of frequency 103 103 Standard size AC Voltage (V) AC Voltage (V) Standard size 102 102 15 0n F 1.0 4.7 µF µF 101 15 0n F 1.0 4.7 µF µF 101 Tamb ≤ 85 °C, 250 VDC 85 °C < Tamb ≤ 105 °C, 250 VDC 100 100 101 103 102 103 104 f (Hz) 101 105 Max. AC voltage as a function of frequency 103 102 103 104 f (Hz) 105 Max. AC voltage as a function of frequency 103 Standard size AC Voltage (V) AC Voltage (V) Standard size 102 102 47 nF 47 1.5 0 nF µF 101 101 Tamb ≤ 85 °C, 400 VDC 100 101 47 nF 47 0n 1.5 F µF 102 103 104 f (Hz) Max. AC voltage as a function of frequency Revision: 27-Aug-15 105 100 101 85 °C < Tamb ≤ 105 °C, 400 VDC 102 103 104 f (Hz) 105 Max. AC voltage as a function of frequency Document Number: 28193 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents Maximum RMS current (sinewave) as a function of frequency UAC is the maximum AC voltage depending on the ambient temperature in the curves “Max. RMS voltage and AC current as a function of frequency”. 105 RC (s) Dissipation factor (x 10-4) 103 5 4 3 2 1 104 102 103 Curve 1: C = 0.33 µF Curve 2: 0.33 µF, C = 1.2 µF Curve 3: 1.2 µF, C = 3.9 µF Curve 4: 3.9 µF, C = 6.8 µF Curve 5: C = 6.8 µF 101 102 103 104 f (Hz) 102 - 50 105 Tangent of loss angle as a function of frequency 0 50 Tamb (°C) 100 Insulation resistance as a function of the ambient temperature (typical curve) ΔT (°C) 16 12 8 4 0 - 60 - 20 20 60 T 100 amb (°C) Maximum allowed component temperature rise (T) as a function of the ambient temperature Tamb (°C) HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C HEAT CONDUCTIVITY (mW/°C) WMAX. (mm) PITCH 15.0 mm 5.0 6.0 PITCH 22.5 mm PITCH 27.5 mm 10 - - 11 19 - 7.0 12 21 - 8.5 16 25 - 10.0 18 28 - 11.0 - - 36 13.0 - - 42 15.0 - - 48 18.0 - - 57 Revision: 27-Aug-15 Document Number: 28193 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film Capacitors”. The component temperature rise (T) can be measured (see section “Measuring the component temperature” for more details) or calculated by T = P/G: • T = component temperature rise (°C) • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: [email protected] To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC) 2. The peak-to-peak voltage (UP-P) shall not be greater than 22 x URAC to avoid the ionization inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x -------- x dt U RDC x -------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component temperature rise”). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: “Heat Conductivity” 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). Revision: 27-Aug-15 Document Number: 28193 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Tamb 85 °C 85 °C < Tamb 105 °C URAC See “Max. AC voltage as function of temperature” per characteristics Maximum continuous RMS voltage Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URAC URAC Maximum peak voltage (VO-P) (< 2 s) 1.6 x URDC 1.3 x URDC Example C = 330 nF - 63 V used for the voltage signal shown in next drawing. UP-P = 40 V; UP = 35 V; T1 = 100 μs; T2 = 200 μs The ambient temperature is 35 °C Checking conditions: 1. The peak voltage UP = 35 V is lower than 63 VDC 2. The peak-to-peak voltage 40 V is lower than 22 x 40 VAC = 113 UP-P 3. The voltage pulse slope (dU/dt) = 40 V/100 μs = 0.4 V/μs This is lower than 60 V/μs (see specific reference data for each version) 4. The dissipated power is 16.2 mW as calculated with fourier terms The temperature rise for Wmax. = 3.5 mm and pitch = 5 mm will be 16.2 mW/3.0 mW/°C = 5.4 °C This is lower than 15 °C temperature rise at 35 °C, according figure “Max. allowed component temperature rise” 5. Not applicable 6. Not applicable Voltage Signal Voltage UP UP-P Time T1 T2 INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and Specific Reference Data”. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz for 470 nF < C 10 μF at 10 kHz for C > 10 μF at 1 kHz 4.3 Robustness of terminations Tensile and bending 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s Revision: 27-Aug-15 No visible damage Document Number: 28193 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.14 Component solvent resistance 4.4.2 Final measurements SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements CONDITIONS Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h Visual examination No visible damage Legible marking Capacitance |C/C| 2 % of the value measured initially Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.3.1 Capacitance Tangent of loss angle: for C 470 nF at 100 kHz for 470 nF < C 10 μF at 10 kHz for C > 10 μF at 1 kHz No visible damage 4.6 Rapid change of temperature A = -55 °C B = +105 °C 5 cycles Duration t = 30 min 4.7 Vibration Visual examination Mounting: see section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Visual examination 4.7.2 Final inspection 4.9 Shock 4.9.3 Final measurements Revision: 27-Aug-15 PERFORMANCE REQUIREMENTS No visible damage No visible damage Mounting: see section “Mounting” of this specification Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination No visible damage Capacitance |C/C| 3 % of the value measured in 4.6.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.6.1 Insulation resistance As specified in section “Insulation Resistance” of this specification Document Number: 28193 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements Temperature: +105 °C Duration: 16 h Temperature: -55 °C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown of flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 3 % of the value measured in 4.4.2 or 4.9.3 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.005 for: C > 470 nF Compared to values measured in 4.3.1 or 4.6.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.11 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown of flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.005 Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Revision: 27-Aug-15 Document Number: 28193 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKT373 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB GROUP C3 4.12 Endurance Duration: 2000 h 1.25 x URDC at 85 °C 0.8 x 1.25 URDC at 105 °C 4.12.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz for 470 nF < C 10 μF at 10 kHz for C > 10 μF at 1 kHz 4.12.5 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % compared to values measured in 4.12.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.12.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to URDC Discharge resistance: UR R = --------------------------------------------------C x 2.5 x dU/dt R 4.13.1 Initial measurements Capacitance Tangent of loss angle: for C 470 nF at 100 kHz for 470 nF < C 10 μF at 10 kHz for C > 10 μF at 1 kHz 4.13.3 Final measurements Capacitance |C/C| 3 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan 0.005 for: C 100 nF or 0.010 for: 100 nF < C 220 nF or 0.015 for: 220 nF < C 470 nF and 0.003 for: C > 470 nF Compared to values measured in 4.13.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Revision: 27-Aug-15 Document Number: 28193 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000