pushPIN™ Heat Sink ATS Part#: ATS-CPX025025010-137-C2-R0 Description: push PIN™ HS,COARSE-PITCH,STRAIGHT,HOLE PATTERN:LEFT-TABBED,BLUE ANODIZED,T766 Heat Sink Heat Sink Type: pushPIN™ Heat Sink Attachment: pushPIN™ - SOLD SEPARATELY Features & Benefits » Quick Attachment – Push pins feature a flexible barb at the end designed to engage with pre-drilled holes in a PCB. » Compression Springs add the necessary force to hold the assembly together for secure attachment. Select from over 21 different springs to achieve precise force required. » Push Pin Material available in brass or plastic in 10 sizes ranging from 920mm in length. Stainless steel hardware kit available for more secure attachment. Visit www.qats.com for available options. For Illustration Purposes ONLY. » Heat Sinks Designed for All Airflow Conditions. Select from over 112 fine pitch HS designed for high velocity air flows and 98 course pitch HS designed for low velocity air flow conditions. Bill of Material » Pre-assembled with phase-changing material for increased thermal performance. Double-sided thermal tape and no TIM options available to meet application-specific requirements. Heat Sink: » All components are RoHS and REACH compliant. » Industry standard hole pattern. Recommended through hole size is 3.175mm Thermal Resistance °C/W ATS-CPX025025010-137-C2-R0 1 Note: » Lightweight, aluminum HS extruded from AL6063 provide optimal heat transfer with a blue anodized finish. Thermal Performance 100 AIR VELOCITY - LFM (m/s) (0.5) Qty This item represents the heat sink ONLY. To order the complete pushPIN™ Assembly, visit www.qats.com. 200 (1.0) 300 (1.5) 400 (2.0) 500 (2.5) 600 (3.0) 700 (3.5) Unducted Flow 18.36 12.58 10.36 9.06 8.17 7.50 6.99 Ducted Flow 11.90 8.89 7.49 6.62 6.01 5.55 5.19 A Dimensions B C E Fin Pitch Fin Type COARSEPITCH STRAIGHT Hole Pattern LEFTTABBED Product Detail P/N ATS-CPX025025010-137-C2-R0 25.00 25.00 10.00 30.00 F 30.00 Push Pin Spring N/A N/A TIM T766 Finish BLUE ANODIZED NOTES: For Illustration Purposes ONLY. 1) Dimension A is the length of the heat sink in the direction of the flow. 2) Dimension B is the width of the heat sink perpendicular to the flow direction. 3) Dimension C is the heat sinkheight from the bottom of the base to the top of the fin field. 4) Dimension E is the distance between holes perpendicular to the direction of the flow. of flow. 5) Dimension F is the distance between holesin the direction of flow. 6) Thermal performance data are provided for reference only. Actual performance may vary by application. 7) ATS reserves the right tp update or change its products without notice to improve the design or performance. 8) ATS certifies that this heat sink assemby is RoHS-6 and REACH compliant. 9) Contact ATS to learn about custom options available. For further technical information, please contact Advanced Thermal Solutions, Inc. 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM