RGB LED strip control unit TLS-CTR-RGB ■ Features: Ø 105*65*25mm dimension Ø 12VDC input Ø output with 4 connect, +12V/R/G/B, Power: 120W Ø With remote control Ø 12kinds color variation. R/G/B/V/GB/Y/W/RGB blinking/ 7 color blinking/ RGB slow blinking/ 7 color slow blinking / 7 color fast + slow blinking Ø Light, small dimension, easy to use. Ø With remote control Ø Application for: LED module, LED flexible strip n Full set of LED strip picture n Adjustable Light Controller Manual I、main technical indicators Operating temperature:-20-60℃ Supply voltage: DC12V Output: tri CMOS open-drain output Connection: Anode sharing Rated load current: 4A every way Maximum load current: 6A every way APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 2 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] RGB LED strip control unit TLS-CTR-RGB Color changes as follows: No. Color Remarks 1 Red(static) 2 Blue (static) 3 Purple(static) 4 Green(static) 10 5 Yellow(static) 11 6 Cyan(static) Adjustable brightness, the speed is not adjustable No. Color 7 White(static) 8 Tricolor hopping Seven-color hopping 9 Tricolor gradient Seven-color gradient Remarks Adjustable brightness, the speed is not adjustable Adjustable brightness and speed Adjustable speed III、Control Panel and connection as follows: IV、Attention: 1、 The supply voltage for the product is DC12V, DC24V or AC220V is not available. 2、 Never connect the cathode and the anode together, otherwise it may lead to short circuit. 3、 Output line should be connected under the wiring diagram provided by the color APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 2 WWW.BETLUX.COM EMAIL: [email protected] , [email protected]