S2 Relay Series Axial style reed relay Variable mounting options 10W, 50W and 100W contact options Reliable reed switch contacts The S2 reed relay series from Cynergy3 has been developed for applications where PCB mounting is not possible. The relay can be mounted in a variety of methods and orientations to suit particular applications. The leadout wires are flexible enough to allow bending for assembly into equipment. Available with either a 10W or 50W contact in a pressurised reed switch or a 100W contact in an evacuated reed switch. Contact Specification Nominal Coil Voltage Material Switch atmosphere Isolation across contacts kV Switching Power Max. Switching Voltage Max. V Switching Current Max. A Carry Current Max A Capacitance across pF DC or AC peak DC or AC peak DC or AC peak SPST (Form A) 3 5,12,24 5,12, 24 Rhodium Pressurised Pressurised Evacuated 0.2 0.5 1.0 10W 50W/70VA 100VA 200 350dc/300ac DC 0.25 DC0.7/AC0.5 DC 1.0 1 2.5 <0.1 coil to screen contacts grounded Lifetime operations dry switching 50W switching Contact Resistance mΩ max (typical) Insulation Resistance Ωmin (typical) Coil Specification 3V Must Operate Voltage V DC @ 20ºC 2.25 Must Release Voltage V DC @ 20ºC 0.5 Operate Time ms diode fitted 0.1 Release Time ms diode fitted 0.07 Resistance Ω @ 20ºC 250 Relay Specification Isolation contact/coil kV Insulation resistance contact to all terminals Ωmin (typical) Environmental Operating Temp range ºC Storage Temp range ºC Standard Parts Coil Volts Vdc Switching Power S2-03P 3 10 VA S2-05P 5 70 VA S2-12P 12 70 VA S2-24P 24 70 VA S2-05E 5 100 VA S2-12E 12 100 VA S2-24E 24 100 VA 109 107 80 (30) 1010 (1013) 12V 9 2 1.0 0.5 1000 5V 3.7 1 1.0 0.5 160 24V 19 3 1.0 0.5 1000 1 TBC -40 to +85 -40 to +125 Isolation kV 0.2 0.5 0.5 0.5 1.0 1.0 1.0 Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements. Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Mechanical Dimensions 2.0 4.0 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D S2 2016 www.cynergy3.com © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.