ALPHA & OMEGA SEMICONDUCTOR θ RECOMMENDED LAND PATTERN SYMBOLS A A1 b c D D2 D3 D4 E E1 E2 E3 E4 E5 e L L1 L2 L3 L4 L5 θ DIMENSIONS IN MILLIMETERS MIN 0.85 0.00 0.35 0.15 4.20 2.125 1.376 2.00 0.35 1.075 0.150 0.35 0 1.375 0.20 1.30 0.960 0° NOM 0.90 −−− 0.40 0.20 5.20 BSC 4.35 2.175 1,476 5.55 BSC 6.05 BSC 2.15 0.45 1.175 0.200 1.27 BSC 0.45 --1.475 0.30 1.40 1.060 --- MAX 1.00 0.05 0.45 0.25 4.50 2.225 1.576 2.30 0.55 1.275 0.250 0.55 0.10 1.575 0.40 1.50 1.160 10° DIMENSIONS IN INCHES MIN 0.033 0.000 0.014 0.006 NOM MAX 0.035 0.039 −−− 0.002 0.018 0.016 0.008 0.010 0.205 BSC 0.165 0.171 0.177 0.084 0.086 0.088 0.0582 0.0542 0.0622 0.219 BSC 0.238 BSC 0.079 0.085 0.091 0.014 0.018 0.022 0.042 0.046 0.050 0.006 0.008 0.010 0.050 BSC 0.014 0.018 0.022 0 --0.004 0.054 0.058 0.062 0.008 0.012 0.016 0.051 0.055 0.059 0.038 0.042 0.046 0° --10° UNIT: mm NOTE 1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH AND GATE BURRS. MOLD FLASH AT THE NON-LEAD SIDES SHOULD BE LESS THAN 6 MILS EACH. 2. CONTROLLING DIMENSION IS MILLIMETER. CONVERTED INCH DIMENSIONS ARE NOT NECESSARILY EXACT.