Ordering number : EN8997A SVC704 Varactor Diode http://onsemi.com Single Varactor Diode for VCO 16V, 50nA, CR=6.0, rs=0.8Ω, MCPH3 Features • • • High capacitance ratio (VR=1.0 to 7.0V) Small-sized package Low series resistance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Reverse Voltage Junction Temperature VR Tj Storage Temperature Tstg Conditions Ratings Unit 16 V 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7019A-001 • Package : MCPH3 • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel SVC704-TL-E 0.15 0.25 2.0 Packing Type : TL 1.6 2.1 0 to 0.02 V5 LOT No. LOT No. 3 Marking TL 0.65 2 Electrical Connection 0.3 3 0.07 0.85 0.25 1 1 : Anode 2 : No Contact 3 : Cathode MCPH3 Semiconductor Components Industries, LLC, 2013 September, 2013 1 2 72512 TKIM/82306/61506VC MSIM TB-00002374 No.8997-1/6 SVC704 Electrical Characteristics at Ta=25°C Parameter Symbol Breakdown Voltage V(BR)R IR C1.0V IR=10μA VR=10V VR=1.0V, f=1MHz C7.0V VR=7.0V, f=1MHz Series Resistance rs VR=1.0V, f=470MHz Capacitance Ratio CR C1.0V / C7.0V Reverse Current Interterminal Capacitance* Ratings Conditions min typ Unit max 16 V 50 nA 26.0 30.0 pF 3.4 4.6 pF 0.8 Ω 6.0 Ordering Information Package Shipping memo MCPH3 3,000pcs./reel Pb Free C, Q -- VR 1000 1000 VRF=20mVrms Interterminal Capacitance, C -- pF 7 7 5 5 3 3 2 2 100 7 al Qu 5 it or, act F y z MH 70 4 = Qf 100 7 5 3 3 2 2 Inte rter 10 min al C apa cita 10 nce ,C 7 Quality Factor, Q Device SVC704-TL-E f=1 7 MH z 5 5 3 3 2 2 1.0 1.0 0 1 2 3 4 5 6 Reverse Voltage, VR -- V 7 8 9 10 IT10665 No.8997-2/6 SVC704 C -- Ta 1.20 VRF=20mVrms f=1MHz 1.18 1.16 1.14 .0V =1 VR 1.12 1.10 Capacitance Ratio 1.08 V 2.5 4.0V V 7.0 1.06 1.04 1.02 4.0V 1.00 0.98 V V R=7.0 0.96 2.5V 0.94 1.0 V 0.92 0.90 --50 --25 0 25 50 75 Ambient Temperature, Ta -- °C 100 125 150 IT10666 No.8997-3/6 SVC704 Taping Specification SVC704-TL-E No.8997-4/6 SVC704 Outline Drawing SVC704-TL-E Land Pattern Example Mass (g) Unit 0.007 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.8997-5/6 SVC704 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.8997-6/6