It’s All a Matter of TechNiQ. NiQ: Our latest generation of energy-saving motors. About ebm-papst. As a leader in technologies for ventilation and drive engineering, ebm-papst is in demand as an engineering partner in many sectors. With over 15,000 different products, we provide the right solution for just about any challenge. Our fans and drives are reliable, quiet and energy-efficient. Six reasons that make us the ideal partner: Our systems expertise. Proximity to our customers. You want the best solution for every project. The entire v entilation ebm-papst owns 57 sales offices worldwide, of which 47 are sub system must thus be considered as a whole. And that’s what we sidiaries with an extensive network of sales representatives and do – with motor technology that sets standards, sophisticated distributors. You will always have a local contact, someone who electronics and aerodynamic designs – all from a single source speaks your language and knows your market. and perfectly matched. Our standard of quality. Our spirit of invention. Our quality management is uncompromising, at every step in every We are also always able to develop customized solutions for you process. This is underscored by our certification according to with our versatile team of over 600 engineers and technicians. international standards including DIN EN ISO 9001, ISO/TS 16949-2 and DIN EN ISO 14001. Our lead in technology. We are pioneers and leaders in the development of high-efficiency Our sustainable approach. EC technology. Already today almost our entire product range is Assuming responsibility for the environment, for our employees and also available with GreenTech EC technology. The list of benefits is for society is an integral part of our corporate philosophy. We develop long: higher efficiency, low maintenance, longer service life, sound products with an eye to maximum environmental compatibility, reduction, intelligent control characteristics and incomparable in particular resource-preserving production methods. We promote energy efficiency. environmental awareness among our young staff and are actively involved in sporting, cultural activities and education. That’s what makes us a leading company – and an ideal partner for you. 2 Even more intelligent, economical and convincing. Conventional shaded-pole motors have long since become a thing Unbeatably economical. of the past as a choice of motor for condensers and evaporators. When we developed the NiQ we were not just looking for a more Thanks to the use of high-efficiency GreenTech EC technology our economical solution, we wanted to achieve even more efficiency successful iQ motor range is far more intelligent, energy-saving and as well. The use of GreenTech EC technology produces efficiency ecological. In the latest generation, the NiQ, we have not only enhanced levels up to 70 %, thus enormously reducing operating costs. the existing advantages but have also added new ones. In certain areas it was also possible to further optimize efficiency as compared to the iQ and iQ². A logical further step. The NiQ is a further development based on its predecessors, the iQ and A perfect substitute. iQ². Improved winding technology, optimized material selection and The tremendous cost savings in relation to obsolete AC technology know-how transferred from the heating technology sector have resulted not only make our NiQ motors the first choice for new installations – in even better product features in many areas. With the plastic used, retrofitting in existing applications is also a worthwhile investment the motor qualifies for approval in applications involving incidential which pays for itself in no time at all. Replacing motors in older contact with foodstuffs (for example in open vegetable display cases). systems is a straight forward matter. 3 Presenting: The best iQ ever. Technical data Nominal voltage 220–240 VAC, 115–127 VAC, 50–60 Hz Material Plastic housing Airflow direction Air exhaust or air intake (depending on impeller) Direction of rotation CCW (view on drive side) Degree of protection IP54 Insulation class “H” Installation position Any Mode of operation Continuous operation (S1) Bearings Maintenance-free bearing system Motor protection By electronics Electrical hook-up Power cable Protection class II (without grounding conductor) Approvals UL, VDE as per DIN EN 60335-2-24, DIN EN 60335-2-89, DIN EN 60075-15 Fitting of Guard grille and wall ring are fitted to the attachments projecting thread ends on the drive side Mounting of Impeller is mounted on the motor shaft by axial impeller using a plastic hub and an M4 bolt Ambient temperature – 40 °C to +50 °C 4 Refrigeration applications. Nowadays it is more important than ever to save energy. Fans offer great potential for doing so, as they are often in operation for long periods – e.g. in refrigerated display cases and bottle coolers. Our successful iQ motor is already used by a number of well-known supermarket chains. The NiQ is the logical next step – and as such even more economical and efficient than its predecessor. Suitable for incidential contact with foodstuffs. The plastic used for the NiQ meets the requirements of the EU regulation 10/2011/EU as well as the framework regulation 1935/2004/EC and the regulation 2023/2006/EC. It also satisfies the demands of the US Food and Drug Administration (FDA). The motor therefore qualifies for approval in areas involving incidential contact with foodstuffs, such as in supermarket open vegetable display cases. 5 It’s All a Matter of TechNiQ. Same accessories as for Q, Optimized design for Constant speed even with iQ and iQ² motors greater economy fluctuating voltage Even more ecological and sustainable through the use of plastic 6 Simple replacement of AC with EC through the Long service life thanks to maintenance-free bearing system use of identical mechanical interfaces Extremely smooth operation thanks to low-friction bearings One concept can replace com- Even greater efficiency than iQ parable AC motors of several sizes and iQ² Enhanced thermal characteristics Intelligent electronics with thanks to new winding technology speed control, overload and Plug-in cable for flexibility locked-rotor protection 7 The most economical iQ ever. 70 % lower power consumption: Comparison of efficiency between NiQ 3212 and iQ 3612 A typical supermarket uses 200 AC fans with 200 mm blades (28° pitch) in its refrigerated units. Replacing the shaded-pole 64 motors with an iQ or NiQ motor reduces energy consumption by 62 39 megawatt-hours. That corresponds to an annual saving 23 tonnes of CO2. * 0.13 €/kWh 60 Efficiency in % of more than 5,000 €* and avoids the production of approximately 58 56 54 52 50 5 6 NiQ 3212 8 7 8 9 Output power in watts iQ 3612 10 11 NiQ modes of operation. Additional functions are available to make the NiQ even smarter and refrigeration applications even more efficient. Choose the feature to suit your application. NiQ reverse on start. The NiQ reverse on start automatically runs in reverse for a pre- programmed time on starting. An important function for refrigeration devices, as it blows the accumulated dust out of the heat exchanger of the condenser – thus ensuring constant high cooling capacity. NiQ reverse on demand. With the NiQ reverse on demand it is possible to define the time and duration of reverse operation as required. This means that the evaporator defrost cycle can be used to remove dust from the heat exchanger of the condenser for example. NiQ two speeds. The particular feature of the NiQ two speeds is that it is supplied with two factory-programmed speed levels. This makes it possible to run the application in different day and night modes for even greater energy savings. 9 Technical data. Overview of power ranges for NiQ 3208, NiQ 3212, NiQ 3224 18 30 NiQ 3224 15 12 20 NiQ 3212 15 9 10 6 NiQ 3208 5 Output power in watts Power consumption in watts 25 3 0 0 0 200 400 600 800 1,000 1,200 1,400 Air flow V in m³/h Technical data axial blade Ø 154 mm Technical data axial blade Ø 172 mm 1.8 2 1.2 1 0.6 0 0 150 170 190 210 230 Air flow V in m³/h 250 270 290 6 3.6 4 2.4 2 1.2 0 0 200 220 240 260 280 300 320 Air flow V in m³/h 340 1,300 rpm: pitch 22° pitch 28° pitch 34° 1,300 rpm: pitch 22° pitch 28° pitch 34° 1,550 rpm: pitch 22° pitch 28° pitch 34° 1,550 rpm: pitch 22° pitch 28° pitch 34° 10 360 380 400 Output power in watts 3 Power consumption in watts 2.4 Output power in watts Power consumption in watts 4 Technical data. 7.2 10 6 8 4.8 6 3.6 4 2.4 2 1.2 0 350 400 450 Air flow V in m³/h 500 550 15 20 12 15 9 10 6 5 3 0 0 300 25 600 Output power in watts 12 Power consumption in watts Technical data axial blade Ø 230 mm Output power in watts Power consumption in watts Technical data axial blade Ø 200 mm 0 400 500 600 700 Air flow V in m³/h 800 1,300 rpm: pitch 22° pitch 28° pitch 34° 1,300 rpm: pitch 22° pitch 28° pitch 34° 1,550 rpm: pitch 22° pitch 28° pitch 34° 1,550 rpm: pitch 22° pitch 28° pitch 34° 900 1,000 30 18 25 15 20 12 15 9 10 6 5 3 0 Output power in watts Power consumption in watts Technical data axial blade Ø 254 mm 0 600 700 800 900 1,000 Air flow V in m³/h 1,100 1,300 rpm: pitch 22° pitch 28° pitch 34° 1,550 rpm: pitch 22° pitch 28° pitch 34° 1,200 1,300 11 Technical data. Standard version Drive end 5.5 ** 26 13 M4 (2x) b±1 Ø 3.6 M4 (4x) 13 .1 Ø 25.4 Ø 82.1 Ø 77.9 Ø 45 Tightening torque 1.4±0.15 Nm c±1 13 M4 (2x) 18 Ø 67 a±1.5 Standard direction of rotation Non-drive end Drive end Technical data Weight Typ kg* a b c NiQ 3208 0.33 74.0 43.5 30.5 NiQ 3212 0.41 82.0 43.5 30.5 NiQ 3224 0.55 91.5 43.5 38.5 * without Cable ** NiQ 3224: 10.5 Data is subject to change without notice at ebm-papst discretion. 12 Dimensions in mm Axial impellers. b b a c ❮ “V” 6.6 ❮ Direction of rotation c 4.0 mm … 25.4 mm “A” ❯ Axial impellers Part no. for air flow direction “V” Part no. for air flow direction “A” Blade angle 𝛂 27453.34001 27453.34201 22° ± 1°30’ 154 27.5 14.0 27453.34002 27453.34202 28° ± 1°30’ 154 32.0 16.0 27453.34003 27453.34203 34° ± 1°30’ 154 37.0 18.0 27453.34004 27453.34204 22° ± 1°30’ 172 31.0 14.5 27453.34005 27453.34205 28° ± 1°30’ 172 36.0 17.0 27453.34006 27453.34206 34° ± 1°30’ 172 42.0 21.0 27453.34007 27453.34207 22° ± 1°30’ 200 32.0 15.5 27453.34008 27453.34208 28° ± 1°30’ 200 37.5 18.0 27453.34009 27453.34209 34° ± 1°30’ 200 45.0 22.0 27453.34010 27453.34210 22° ± 1°30’ 230 35.0 17.5 27453.34011 27453.34211 28° ± 1°30’ 230 43.0 21.5 27453.34012 27453.34212 34° ± 1°30’ 230 50.0 24.0 27453.34013 27453.34213 22° ± 1°30’ 254 37.0 19.0 27453.34014 27453.34214 28° ± 1°30’ 254 45.0 23.5 27453.34015 27453.34215 34° ± 1°30’ 254 52.0 26.0 27453.34016 27453.34216 22° ± 1°30’ 300 43.0 21.5 27453.34017 27453.34217 28° ± 1°30’ 300 53.5 26.5 27453.34018 27453.34218 34° ± 1°30’ 300 61.0 30.0 a b c Data is subject to change without notice at ebm-papst discretion. 13 a 2,5 c d b a Mounting brackets. 25 2.5 8,2 18 c d 8 4,3 14 8.2 18 4.3 5 c 16,2 d 25 8 a 14 4.3 26 4.2 6.2 8.2 8.2 16 25 9° 18 4.3 4.3 14 8 4.3 14 and blue chromated 10 18 10 9° 40 25 8.2 4,2 Material: S heet steel, galvanized 18 24 2.58.2 6,2 a 2.5 14 18 18 18 4.3 Vers. 3 5 18 c b d 14 8.2 Vers. 2 b c d 4,3 14 8 16 25 Vers. 1 a 8 18 25 24 40 2.5 16 25 8,2 b 18 26 16.2 16 25 24 4.2 40 51 78 51 78 5 85.5 51 78 26 100 112.0 — 3 150 Data is subject to change without notice at ebm-papst discretion. 78 100 4.3 2.5 8.2 8 21 40 a 24 4.3 14 8.2 8.2 26 26 1.5 8 2124 40 4.3 4.3 8 7 21 13 31.8 40 50.3 8.2 8.2 8.2 1.5 1.5 2424 88 2121 4040 8.2 8.2 8.2 8.2 26 26 78 100 26 14 14 51 Material: S heet steel, galvanized 26 1.5 14 4.3 4.3 14 26 2.5 8.2 2.5 2.5 8.2 8.2 78 78 100 100 26 26 14 14 8.2 51 78 100 aa 51 51 26 Vers. 3 a 2.5 Vers. 2 a 51 Vers. 1 172 a 300 100 51 24 16.2 27452.71001 262 16.2 9°100 74.5 1 254 100 10 78 100 26 26 4.3 14 4.3 14 4.3 26 Mounting bracket – foot measure 26 mm (standard or multi-function version) 154 1 39 172 1 52 200 72 230 1 4.3 1 27452.71204 254 1 84 27452.71205 254 2 84 27452.71206 300 2 109 27452.71207 300 3 109 27452.71202 14 27452.71203 14 4.3 4.3 14 Data is subject to change without notice at ebm-papst discretion. 14 7 26 72 13 31.8 50.3 4.3 4.3 14 a 7 14 26Vers. 13 31.8 50.3 27452.71201 4.3 14 Fan size 8.2 8.2 8.2 26 26 4.3 4.3 77 1313 31.8 31.8 50.3 50.3 8.2 14 14 Part no. 1.5 18 5 27452.71004 78 7 230 51 40 24 200 27452.71003 40 6.2 27452.71005 6.2 172 4.2 abcd 26 5 16.2 1 18 56.0 10 4.2 19° 67.0 2.5 27452.71002 18 Vers. 9° 1.5 13 24 31.8 50.3 Fan size 10 18 Part no. 4.3 14 18 4.3 14 24 6.2 Mounting bracket – foot measure 18 mm (multi-function version) 8 21 40 8.2 18 18 16 25 8.2 18 14 4.3 and blue chromated Fan housings. Material: S heet steel, Øa 67 67 gray plastic-coated d ❮ “V” R3 .5 b 4.3 2 4.3 1 48 c Fan housings, air flow direction “V” Part no. (sheet steel) Part no. (plastic) Fan size Max. blade angle 𝛂 27452.70501 27452.70802 154 34° 164190200 24 26 27452.70502 27452.70803 172 34° 182208223 24 26 27452.70503 27452.70804 200 34° 210236246 24 26 27452.70504 — 230 28° 240 27452.70505 27452.70805 254 28° 264290300 24 26 27452.70506 27452.70806 300 22° 308344356 24 26 a b 266 c 276 d 24 d (plastic) — Data is subject to change without notice at ebm-papst discretion. 36 Material: S heet steel, .5 R4 1 67 67 gray plastic-coated d 4.3 “A” ❯ b Øa 2 4.3 c Fan housings, air flow direction “A” Part no. (sheet steel) Part no. (plastic) Fan size Max. blade angle 𝛂 a b c d d (plastic) 27452.70701 — 154 34° 162190200 24 — 27452.70702 — 172 34° 180208223 24 — 27452.70703 — 200 28° 208236246 24 — 27452.70704 — 230 28° 238266276 24 — 27452.70705 27452.70807 254 28° 262290300 24 26 27452.70706 — 300 22° 308 344 356 24 — Data is subject to change without notice at ebm-papst discretion. 15 www.ebmpapst.com ebm-papst Landshut GmbH Hofmark-Aich-Straße 25 84030 Landshut Germany Phone +49 871 707-0 Fax +49 871 707-465 [email protected] 37954-7-8811 · 2016-01 · WO-1’