4090

12CGQ150
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4090, REV.-
HERMETIC POWER SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
Applications:
œ Switching Power Supply œ Converters œ Free-Wheeling Diodes œ Polarity Protection Diode
Features:
œ
œ
œ
œ
œ
œ
œ
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Reverse Leakage Current
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward Current
Symbol
VRWM
IF(AV)
Max. Peak One Cycle NonRepetitive Surge Current
Non-Repetitive Avalanche
Energy
Repetitive Avalanche Current
IFSM
Thermal Resistance (per leg)
R
Thermal Resistance (per leg)
Max. Junction Temperature
Max. Storage Temperature
R JC
TJ
Tstg
Electrical Characteristics:
Characteristics
Max. Forward Voltage Drop
(per leg)
Max. Reverse Current (per leg)
EAS
IAR
JC
Symbol
VF1
VF2
IR1
IR2
Max. Junction Capacitance
(per leg)
CT
Max. Reverse Recovery Time
trr
Condition
50% duty cycle, rectangular
wave form
8.3 ms, half Sine wave
(per leg)
TJ = 25 •C, IAS = 0.6 A,
L = 40mH
IAS decay linearly to 0 in 1 ms
‹ limited by TJ max VA=1.5VR
(common cathode, common
anode, doubler)
(single rectifier)
Condition
@ 15A, Pulse, TJ = 25 •C
@ 15A, Pulse, TJ = 125 •C
@VR = 200V, Pulse,
TJ = 25 •C
@VR = 200V, Pulse,
TJ = 125 •C
@VR = 5V, TC = 25 •C
fSIG = 1MHz,
VSIG = 50mV (p-p)
IF = 0.5 A, IR = 1.0 A,
IRM = 0.25 A, TJ = 25 •C
Max.
200
35
Units
V
A
200
A
11.4
mJ
0.6
A
0.72
•C/W
1.45
-65 to +200
-65 to +175
•C/W
•C
•C
Max.
1.01
0.85
0.35
Units
V
V
mA
8.0
mA
300
pF
33
nsec
221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586-7600 Fax (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-Mail Address - [email protected]
12CGQ150
SENSITRON
TECHNICAL DATA
DATA SHEET 4090, REV.Mechanical Dimensions: In Inches / mm
.149 (3.78
Dia.
.139 3.53)
.260
.249
.050
.040
.545 (13.84
.535 13.60)
(6.60
6.32)
(1.27
1.02)
1
2
3
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
COMMON CATHODE
1
2
.045 (1.14
.035 0.89)
3 Places
3
.150(3.81) BSC
.150(3.81) BSC
2 Places
PINOUT TABLE
TYPE
DUAL RECTIFIER, COMMON CATHODE
Curves shown are for bare die only
TO-254
PIN 1
ANODE 1
PIN 2
COMMON CATHODE
PIN 3
ANODE 2
Typical Reverse Characteristics
Typical Forward Characteristics
Instantaneous Reverse Current - I R (mA)
101
101
175 °C
100
175 °C
150 °C
10-1
125 °C
-2
10
100 °C
75 °C
10-3
50 °C
10-4
25 °C
10-5
125 °C
0
40
-1
10
80
120
160
200
Reverse Voltage - VR (V)
240
Typical Junction Capacitance
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
200 °C
200 °C
100
25 °C
10-2
0.0
0.2
0.4
0.6
0.8
Forward Voltage Drop - VF (V)
1.0
300
240
180
120
60
0
0
40
80
120
160
Reverse Voltage - VR (V)
200
221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586-7600 Fax (631) 242-9798
World Wide Web Site - http://www.sensitron.com E-Mail Address - [email protected]
240
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]