LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED ARRAY CUSTOMER DESIGN Pb Lead-Free Parts LA360B/UGHYR-PF DATA SHEET DOC. NO : QW0905-LA360B/UGHYR-PF REV. : A DATE : 27 - Aug. - 2015 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 1/8 Package Dimensions 4.5 5.3±0.3 2.95 3.0 6.4 6.95 8.25 5.4 2.4 1.05 3.5±0.5 1.5 4.5 5.1±0.5 UG 2.54TYP Anode Green Anode Yellow HY(R) Anode Green Anode Yellow Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. 3.62 LUGHYR31042-PF 3.86 2.92 5.3 2.95 UG 1.5MIN 25.0MIN HY(R) 0.5 1.0MIN Anode Green 2.54TYP Anode Yellow Anode Green Anode Yellow 0.5TYP LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 2/8 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT HY(R) UG Forward Current IF 25 30 mA Peak Forward Current Duty 1/10@10KHz IFP 75 60 mA Power Dissipation PD 65 78 mW Reverse Current @5V Ir 10 μA Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +85 -20~ +80 ℃ Storage Temperature Tstg -40 ~ +100 -30~ +100 ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Emitted AlGaInP Lens Green Dominant wave length λD nm Typ. Luminous Viewing Spectral Forward voltage intensity angle halfwidth @20mA(V) @20mA(mcd) 2 θ 1/2 △λnm (deg) Min. Max. Min. Typ. 572 20 1.7 2.6 38 65 20 590 20 1.7 2.6 450 700 20 White Diffused LA360B/UGHYR-PF AlGaInP Yellow Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 3/8 Brightness Code For Standard LED Lamps UG CHIP Group Luminous Intensity(mcd) at 20 mA Min. Max. A9 38 50 A10 50 65 A11 65 90 A12 90 120 Color Code UG CHIP Group Wave length(nm) at 20 mA Min. Max. 7 568 570 8 570 572 9 572 574 10 574 576 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 4/8 Brightness Code For Standard LED Lamps HY(R) CHIP Group Luminous Intensity(mcd) at 20 mA Min. Max. A18 450 550 A19 550 700 A20 700 900 A21 900 1100 Color Code HY(R) CHIP Group Wave length(nm) at 20 mA Min. Max. 15 585 587 16 587 589 17 589 592 18 592 595 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 5/8 Typical Electro-Optical Characteristics Curve HYR CHIP Fig.2 Relative Intensity vs. Forward Current Relative Intensity Normalize @20mA Forward Current(mA) Fig.1 Forward current vs. Forward Voltage Forward Current(mA) Forward Voltage(V) Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 1.0 Relative Intensity@20mA Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25 ℃ Forward Voltage@20mA Normalize @25 ℃ Fig.3 Forward Voltage vs. Temperature 0.5 0.0 500 550 600 Wavelength (nm) 650 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LA360B/UGHYR-PF Page 6/8 Typical Electro-Optical Characteristics Curve UG CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 2.0 Relative Intensity Normalize @20mA Forward Current(mA) 60 50 40 30 20 10 0 1.0 0 0 0.5 1.0 1.5 2.0 2.5 3.0 1.0 10 1.2 1.1 1.0 0.9 0.8 20 40 60 80 Relative Intensity @20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 550 600 Wavelength (nm) 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 Ambient Temperature(℃) Ambient Temperature(℃) 500 Fig.4 Relative Intensity vs. Temperature Relative Intensity @20mA Normalize @25℃ Forward Voltage@20mA Normaliz @25 ℃ Fig.3 Forward Voltage vs. Temperature 0 1000 Forward Current(mA) Forward Voltage(V) -20 100 650 80 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LA360B/UGHYR-PF Page 7/8 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 ° C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to case) 2.Wave Soldering Profile Dip Soldering Preheat: 120° C Max Preheat time: 120seconds Max Ramp-up 2°C/sec(max) Ramp-Down:-5 ° C/sec(max) Solder Bath:260 ° C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to case) Temp(° C) 260° C3sec Max 260° 5°/sec max 120° 25° 0° 0 2°/sec max Preheat 100 200 Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 250 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/8 PART NO. LA360B/UGHYR-PF Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. 1.Ta=105 ℃±5℃&-40℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=245 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11