923

SHD124446
SHD124446P
SHD124446N
SHD124446D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 923, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
Applications:
Switching Power Supply
Diode
Converters
Free-Wheeling Diodes
Polarity Protection
Features:
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Reverse Leakage Current
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward Current
Symbol
VRWM
IF(AV)
Max. Peak One Cycle NonRepetitive Surge Current
Non-Repetitive Avalanche
Energy
Repetitive Avalanche Current
IFSM
Thermal Resistance (per leg)
Max. Junction Temperature
Max. Storage Temperature
R JC
TJ
Tstg
EAS
IAR
Condition
50% duty cycle, rectangular
wave form
8.3 ms, half Sine wave
(per leg)
TJ = 25 C, IAS = 0.75 A,
L = 40mH
IAS decay linearly to 0 in 1 s
limited by TJ max VA=1.5VR
(single rectifier)
-
Max.
200
30
Units
V
A
200
A
16
mJ
0.75
A
1.5
-65 to +200
-65 to +175
C/W
C
C
Max.
1.09
0.93
0.7
Units
V
V
mA
16
mA
600
pF
50
nsec
Electrical Characteristics:
Characteristics
Max. Forward Voltage Drop
(per leg)
Max. Reverse Current (per leg)
Symbol
VF1
VF2
IR1
IR2
Max. Junction Capacitance
(per leg)
CT
Max. Reverse Recovery Time
trr
Condition
@ 30A, Pulse, TJ = 25 C
@ 30A, Pulse, TJ = 125 C
@VR = 200V, Pulse,
TJ = 25 C
@VR = 200V, Pulse,
TJ = 125 C
@VR = 5V, TC = 25 C
fSIG = 1MHz,
VSIG = 50mV (p-p)
IF = 0.5 A, IR = 1.0 A,
IRM = 0.25 A, TJ = 25 C
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD124446
SHD124446P
SHD124446N
SHD124446D
TECHNICAL DATA
DATA SHEET 923, REV. A
Mechanical Dimensions: In inches / mm
.165 (4.19
Dia.
.155 3.94)
SINGLE
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
COMMON CATHODE
.045 (1.14
.035 0.89)
1
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
2
1
2
COMMON ANODE
.550 (13.97
.530 13.46)
3
DOUBLER
3
1
.065 (1.65
.055 1.40)
3 Plac es
.200(5.08) BSC
2 Plac es
.140(3.56) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DUAL RECTIFIER, DOUBLER (D)
Curves shown are for bare die only.
2
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
3
2
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
1
PIN 3
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
Instantaneous Reverse Current - I R (mA)
101
101
3
TO-258
Typical Forward Characteristics
200 °C
175 °C
100
200 °C
175 °C
0
10
150 °C
-1
10
125 °C
100 °C
10-2
75 °C
10-3
50 °C
10-4
25 °C
10-5
125 °C
0
40
80
120
160
Reverse Voltage - RV (V)
200
240
Typical Junction Capacitance
10-1
25 °C
10-2
0.0
0.2
0.4
0.6
0.8
Forward Voltage Drop -FV(V)
1.0
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
3
600
450
300
150
0
0
40
80
120
160
Reverse Voltage - RV (V)
200
240
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD124446
SHD124446P
SHD124446N
SHD124446D
TECHNICAL DATA
DATA SHEET 923, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]