Product Brief DC Motor Control Shield with BTN8982TA for Arduino The DC Motor Control Shield from Infineon is one of the first high-current motor control boards being compatible to Arduino as well as to Infineon’s XMC1100 Boot Kit. It is capable of driving two uni-directional DC motors (half bridge configuration) or one bi-directional DC motor (H-Bridge configuration). The implemented NovalithIC™ integrated half-bridge driver BTN8982TA can be controlled by a PWM via the IN Pin. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, undervoltage, overcurrent and short circuit. Applications Brushed DC motor control up to 250W continuous load ––8–18V nominal input voltage (max. 6–40V) –– Average motor current 30A restricted due to PCB (BTN8982TA current limitation @ 55A min.) Features Compatible with Arduino Uno R3 and XMC1100 Boot Kit from Infineon Capable of high frequency PWM, e.g. 30kHz Adjustable slew rates for optimized EMI by changing external resistor Driver circuit with logic level inputs Diagnosis with current sense Protection e.g. against overtemperature and overcurrent Benefits Application Diagram of the DC Motor Control Shield VS e.g. XMC1100 Boot Kit or Arduino Uno I/O I/O I/O Reverse Polarity Protection VDD External Power Supply 5V VSS I/O IPDx0P03PxL I/O BTN8982TA INH IN IS SR www.infineon.com/arduino VS VS OUT GND M BTN8982TA INH OUT IN GND SR IS Fast and inexpensive prototyping of DC motor control Easy testing of half- and full-bridge motor control Status flag diagnosis with current sense capability Overtemperature shut down with latch behavior and undervoltage shut down Product Brief DC Motor Control Shield with BTN8982TA for Arduino Block Diagram VS Undervoltage Detection Current Sense Overcurrent Detection HS Overtemp. Detection IS Gate Driver HS Digital Logic LS off IN HS off OUT Gate Driver LS Slew Rate Adjustment INH Overcurrent Detection LS SR GND The BTN8982TA provides a cost optimized solution for protected high-current PWM motor drives with very low board space consumption. Product Summary Type Description Ordering Code DC Motor Control Shield with BTN8982TA for Arduino DC Motor Control Shield with NovalithIC™ integrated half-bridge driver BTN8982TA – and IPD90P04P4L for reverse polarity protection. For the evaluation of brushed DC motor control applications up to 250W continuous load. Compatible with Arduino Uno R3 and XMC1100 Boot Kit. DCMOTORCONTRBTN8982TOBO1 NovalithIC BTN8982TA The BTN8982TA is an integrated high-current half-bridge for motor drive applications. It is part of the NovalithIC™ family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC in one package (PG-TO263-7). BTN8982TAAUMA1 Boot Kit XMC1100 Evaluationboard for XMC1100 MCUs series with detachable SEGGER J-Link and RGB LED Lighting Shield with XMC1202 for Arduino KIT_XMC11_BOOT_001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Useful Links www.infineon.com/arduino www.infineon.com/novalithIC www.infineon.com/xmc1000 CAN ICES-3 (B)/NMB-3(B) Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2015 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B127-I0043-V1-7600-EU-EC-P Date: 01 / 2015 Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.