1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL INSULATOR: PA 46 FLAMABILITY RATING: UL94-V0 COLOR: IVORY CONTACT MATERIAL: COPPER ALLOY CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 1.25MM A ENVIRONMENTAL OPERATING TEMPERATURE: -40 UP TO 85°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING: 1A WORKING VOLTAGE: 125V AC INSULATOR RESISTANCE: >100 MOHM DIELECTRIC WITHSTANDING VOLTAGE: 250V AC/MN CONTACT RESISTANCE: 20 mOHM MAX B STANDARD CERTIFIED: E323964 SOLDERING JEDEC LEAD FREE WAVE SOLDERING PROCESS PACKAGING TUBE BAG FOR POLARITY 2 AND 3 ONLY DIMENSION A = 1.25 x (NB PIN - 1) B = 1.25 x (NB PIN) + 1.75 C Pin 1 PROJECTION: GENERAL TOLERANCE G F 10-JUN-15 MIN. TEMP. AK 06-AUG-13 CHARACTERISTIC QL E 29-OCT-12 PIN GG D C 19-SEP-12 17-NOV-09 PIN STANDARD GG JP B 18-FEB-09 DRAW JP SCALE: A 05-DEC-08 PDF JP SHEET: 1/3 REV DATE FILE BY DRAW: MIKE .X = +/- 0.2 .XX = +/- 0.15 APPROVAL: BBu UNIT: MM DESCRIPTION: 1.25 MM MALE VERTICAL SHROUDED HEADER SIZE WERI PART NO: 653 0xx 114 822 A4 D 1 2 3 4 5 A B C PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B UNIT: MM DESCRIPTION: 1.25 MM MALE VERTICAL SHROUDED HEADER SIZE WERI PART NO: 653 0xx 114 822 A4 SCALE: A 15-JUN-15 PDF AK SHEET: 2/3 REV DATE FILE BY DRAW: AK D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D