Update information (Jun.1.2015 update) Software ver.1.02.0015/2.02.0015 → 1.02.0023/2.02.0023 ● Version information Item Setup PANATERM ParameterConverter SimMotor Setup (USBDriver) Contents Installer for 32bit version Installer for 64bit version PANATERM main body Parameter file conversion software Software for simulation Installer 32 bit version for USB communication device driver Installer 64 bit version for USB communication device driver USBDriver ● History of change point No Objects PANATERM 1 2 3 4 5 PANATERM PANATERM PANATERM PANATERM ● History of correction No Function 1 Parameter 2 Wave form graphic 3 Additional series type setting 4 Trial run Device driver for 32 bit version USB communication Device driver for 64 bit version USB communication Version 1.02.0023 2.02.0023 18.104.22.168 22.214.171.124 126.96.36.199 1.00.0000 2.00.0000 188.8.131.52 184.108.40.206 Contents Updated define files for MINAS-A5II, MINAS-A5B, MINAS-A5L04(A4), MINASA5ND1 and MINAS-A5NL series. Updated operation manual to the latest data. Updated layout of Selection of the communication with the driver screen. Updated layout of Measure Item Select screen of Wave form graphic. The 4 defects below were revised. Phenomenone Revised on the point that sometimes the different set value is displayed after writing to EEPROM. Revised on the point that the collective button is displayed different language after changing the language. Revised on the point that sometimes PANATERM is freezed by failure of updating the series definition file. Revised on the point that the motor do not run the operation area Min./Max..