Fused Single-Mode WDM (1480/1550nm) SWDM54 Series Product Description Oplink’s 1480/1550 nm fused single-mode wavelength division multiplexers are manufactured using the proven fused biconical taper technology and Oplink’s stringent quality procedures. With low insertion loss and flat passband, this device is ideal for combining pump (1480 nm) and signal light at 1550 nm in optical fiber amplifiers. Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem. Port 2 Signal L Port 1 In Ø Port 4 (terminated for 1x2 configuration) Port 3 Pump Features Performance Specificationns SWDM54 Series Ultra Low Insertion Loss Premium Operating Wavelength Grade A Unit 1475 - 1485nm / 1545 - 1555nm Insertion Loss < 0.4 < 0.6 dB Isolation > 13 > 11 dB < 0.13 < 0.15 dB Polarization Dependent Loss Directivity > 55 dB Maximum Power Handling 500 mW Operating Temperature - 10 to + 70 °C Storage Temperature - 40 to + 85 °C Fiber Type Package Dimensions SMF-28 ** P1: 250µm bare fiber P2: 900µm loose tube (ø)3.0 x (L)60 (ø)3.0 x (L)65 Ultra High Isolation Low Polarization Sensitivity High Directivity High Stable & Reliable Bidirectional Applications mm Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. CATV Local Area Networks Telecommunications Subscriber Loop Laboratory R&D S0167 - R02. 20100630 Fused Single-Mode WDM (1480/1550nm) SWDM54 Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. SWDM 5 4 S Grade Wavelength 0 Premium Grade = P A Grade = A 1550/1480nm= 54 Type Standard= S Configuration 1x2 = 1 2x2 = 2 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com 0 Fiber Length 0.5 Meter = H 1.0 Meter = 1 * 1.5 Meters = 5 2.0 Meters = 2 Package & Fiber Type P1+ 250μm bare fiber= 11 P2+ 900μm loose tube= 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Notes : * 1 meter is standard. The lead time for special fiber length will be longer. S0167 - R02. 20100630 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules