PRODUCT SPECIFICATION DATE: 03/08/2005 cosmo H.P LED : KLH00RXX3 ELECTRONICS CORPORATION NO. 61L70015 REV. 1 SHEET 1 OF 6 1. Features Cosmo’s high power LED packages can handle up to 350-500mA DC current, and available in 625nm wavelength in mono or multiple colors. These packages are formed by bonding 3 pcs of 40 mil LED chips on a 20mmx20mm metal PCB. A heat sink is mechanically screwed to the board to cool down metal surface temperature below 70 oC . The main features of these packages are as follows： l Very high flux output per LED. l Flat PCB package. On each PCB, the quantity of LED being adjustable from 1 to 3 to meet user’s need. These LEDs being connected in series. l Very long operation life time up to 100k hours attainable, by using a proper heat sink. o l 130±10 cool beam in most packages. 2. Applications l l l l l l l l l Outdoor and indoor architectural lighting Reading light (car/bus/aircraft) Decorative/entertainment lighting Bollards/Security/Garden lighting Traffic signal Portable lighting (flashlight/bicycle) Edge-lit signs (exit sign/point of sales) LCD backlights Light guide 3. Operation and Storage Temperature Parameter Operation temperature Storage temperature Symbol Topr Tstg Value (Data to be ready, -30~+85) (Data to be ready, -40~+110) Unit o C o C PRODUCT SPECIFICATION DATE: 03/08/2005 H.P LED : cosmo NO. 61L70015 REV. 1 SHEET 2 OF 6 KLH00RXX3 ELECTRONICS CORPORATION 4. Dimensions l 35(L)x35(W)x12(H)mm 35 20 Heat Sink LIGHT SOURCE 3.0 35 20 LIGHT SOURCE 2.0 0.7 1.7 Metal PCB Metal PCB LIGHT SOURCE 6 LIGHT SOURCE Screw hole 3 Heat Sink 10 Screw hole 5 1 1 3 R3 R1 2 R1 2 4 1 R1 R2 3 2 R3 R2 R2 3 4 3 R3 2 4 5. Flux Characteristics Flux characteristics of mono color LED at 350mA, junction temperature, Ta = 25 oC Chip quantity：3 LEDs/PCB Color/Wavelength Forward Luminous Part Number (λd) Voltage (Vf) Flux (lm) Wattage Max. (W) View angle ( 2θ 1 ) 2 Typ. KLH00RXX3 Max Min Typ. Red/625nm 2.8 6.6 7.8 45 52 130±10o PRODUCT SPECIFICATION DATE: 03/08/2005 H.P LED : cosmo NO. 61L70015 REV. 1 SHEET 3 OF 6 KLH00RXX3 ELECTRONICS CORPORATION 6. Wavelength Characteristics l Relative spectral power intensity vs. wavelength (Ta=25 oC ) Relative spectral power intensity Relative spectral power intensity vs. Wavelength 1.2 R 1 (634.5 nm) 0.8 0.6 0.4 0.2 0 350 450 550 650 750 Wavelength [λp, nm] 7. Light Output Characteristics l Relative light output vs. junction temperature Relative Luminous Flux [a.u] Ambient Temperature vs. Relative Luminous Flux 10.00 1.00 0.10 -40 -20 0 20 40 Ambient Temperature Ta (o C) 60 80 100 PRODUCT SPECIFICATION DATE: 03/08/2005 H.P LED : cosmo NO. 61L70015 KLH00RXX3 ELECTRONICS CORPORATION SHEET 4 OF 6 8. Forward Current Characteristics l Forward current vs. relative luminous flux (Ta=25 oC ) Forward Current vs. Relative Luminous Flux Relative Luminous Flux [a.u.] 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 200 400 600 800 1000 Forward Current IF (mA) l Forward voltage vs. forward current (3 LEDs/PCB, Ta=25 oC ) Forward Voltage vs. Forward Current [3 chip] Forward Current IF (mA) 10000 1000 100 10 1 4.5 5.0 5.5 6.0 6.5 Forward Voltage V F (V) 7.0 7.5 REV. 1 PRODUCT SPECIFICATION DATE: 03/08/2005 cosmo H.P LED : NO. 61L70015 REV. 1 SHEET 5 OF 6 KLH00RXX3 ELECTRONICS CORPORATION l Forward voltage vs. ambient temperature (3 LEDs/PCB, I F=350mA) Ambient Temperature vs. Forward Voltage Forward Voltage VF (V) 7.6 7.4 7.2 7 6.8 6.6 6.4 6.2 6 5.8 5.6 -40 -20 0 20 40 60 o Ambient Temperature Ta[ C] 9. Spatial Radiation Pattern l 3 Chip/PCB 80 100 PRODUCT SPECIFICATION DATE: 03/08/2005 H.P LED : cosmo KLH00RXX3 ELECTRONICS CORPORATION NO. 61L70015 REV. 1 SHEET 6 OF 6 10. Reliability Test Stress Test 1.High temperature operation life 2.Room temperature operation life 3. Low temperature operation life 4. Wet high temperature Stress Conditions Stress Duration Failure rate (1)Iv< 50% degradation o 85 C at 350mA 1,000 hrs 25 oC at 350 mA 1,000 hrs 0/12 -40 oC at 350 mA 1,000 hrs 0/12 85 oC / 60% RH at 350 mA 1,000 hrs 0/12 200 cycles 0/12 200 cycles 0/12 110 oC 1,000 hrs 0/12 -40 oC 1,000 hrs 0/12 60 oC / 90% RH 1,000 hrs 0/12 200 cycles 0/12 operation life o 5.Powered temperature (1.)-45 C/18min at 350 mA cycle Failure Criteria (2.)Transform /42min (2)Vf max=110% initial 0/12 (3.)85 oC /18min at 350 mA (1.)-45 oC /30 min 6.Temperature Cycle (2.)25 oC /5 min o (3.)120 C /30 min (4.)25 oC /5 min 7.High temperature storage 8. Low temperature storage 9.High temperature humidity storage (1.)-40 oC /20min 10.Thermal shock (2.)Transform /20sec (3.)110 oC /20min