cosmo G1A121000 Reed Relay Features Outside Dimension：Unit (mm) KUAN HSI 2. Sealed construction permits automatic flow soldering G1A121000 XXX 1. Molded epoxy body. Date Code and cleaning. 7.0 3. High reliability relay. 19.50 4. Cost effective. 7.00 0.40 3.50 0.50 25.40 2.54 Schematic : Top View (+) 1 5 2 (-)3 Coil Ratings (AT 20℃) Parameter Rating Unit Coil Resistance 1050 Ω(±10%) Nominal Coil Voltage 12 VDC Maximum Continuous Voltage 18 VDC Must Operate 8.4 VDC Must Release 1.2 VDC Rated Current 11.4 mA Rating Unit Contact Resistance 100 mΩ(max) Operate Time 0.5 ms(max) Bounce Time 0.5 ms(max) Release Time 0.2 ms(max) Electrical Characteristics Parameter Insulation Resistance (100VDC) 10 11 Ω(min) Power 10 VA(max) Switching Voltage 200 VDC(max) Switching Current 0.5 A(max) Carry Current 1.0 A(max) Breakdown Voltage (Across Open Contact) 250 VDC(min) 1500 VDC(max) (Between Coil & Contact) Life Expectancy (Signal Level) 10 8 Operate Temp -40~85 Storage Temp ℃ -50~125 ℃ Resonant Frequency 3.5 KHz Vibration (10~200Hz) 20 g(max) Minimum Permissible Load 100 mVDC 10uA C 2005-2006 COSMO ELECTRONICS CORPORATION ○ http://www.cosmo-ic.com