SENSITRON SEMICONDUCTOR SHD115512 SHD115512B TECHNICAL DATA DATA SHEET 1053, REV. D HERMETIC SCHOTTKY POWER RECTIFIER Low Voltage Drop DESCRIPTION: A 45 VOLT, 60 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-2/2B PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts IO 60 Amps IFSM 860 Amps CT 2400 pF MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) RθJC 0.35 °C/W MAXIMUM OPERATING TEMPERATURE RANGE Top -65 to + 150 °C MAXIMUM STORAGE TEMPERATURE RANGE Tstg -65 to + 150 °C SYMBOL MAX. UNITS Vf 0.64 Volts PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr = 5V) ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 60 Amps) TJ = 25 °C TJ = 125 °C 0.61 MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 °C TJ = 125 °C Ir 4.5 210 • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • mA SHD115512 SHD115512B SENSITRON DATA SHEET 1053, REV. D MECHANICAL DIMENSIONS: In Inches / mm .465±.020 (11.8±.508) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .315±.010 (8.00±.254) .150±.010 (3.81±.254) .315±.010 (8.00±.254) .015±.005 (.381±.127) Copper Anode .090 (2.29) Max .075 (1.91) Max Moly Lid Alumina Ring Moly Base (Cathode) Alumina Ring .015±.002 (.381±.051) .060±.010 (1.52±.254) Moly Base SHD-2 PINOUT TABLE TYPE SINGLE RECTIFIER in a Surface Mount Package .020±.005 R (.508±.127 ) SHD-2B PIN 1 (Base) CATHODE PIN 2 ANODE • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SHD115512 SHD115512B SENSITRON DATA SHEET 1053, REV. D Typical Forward Characteristics 10 Instantaneous Reverse Current - IR (mA) 10 . Typical Reverse Characteristics 2 10 1 10 2 150 °C 125 °C 10 1 100 °C 75 °C 10 0 50 °C 10 -1 125 °C 25 °C 10 -2 0 25 °C 10 0 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 150 °C 3 10 -1 0.0 0.2 0.4 0.6 Forward Voltage Drop - V F (V) 0.8 10 20 30 Reverse Voltage - V R (V) 40 50 Typical Junction Capacitance 2500 2300 2100 1900 1700 1500 1300 1100 900 700 500 0 10 20 30 Reverse Voltage - V R (V) 40 50 Note: The above Vf characteristics are for die on DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •