catalog

Plastic Film Capacitors
Metallized Polypropylene
Film Capacitor
Type : ECQUA [Class X2]
In accordance with UL/CSA and European safety regulation class X2
Equipped with a safety mechanism
Features
● High
humidity resistance
(THB test : 85 °C/85 %/240 V.AC/1000 h (C < 1.0 μF)
● High safety (safety function installed)
● Compact
● Flame-retardant plastic case and non-combustible resin
● RoHS directive compliant
Recommended applications
● Interference
suppressors
Explanation of part number
1
2
3
4
5
6
7
E
C
Q
U
A
A
F
Product code
Dielectric &
construction
Rated voltage
8
9
10
Capacitance
11
12
Cap. Tol.
Suffix
Lead Form
K
±10 %
Code
M
±20 %
Blank
Straight
A
Cut lead
Applicable standard
✽ It is certified as type ECQUA in the following approval.
UL
CSA
Europe
International
Approval
UL60384-14
CAN/CSA E60384-14
EN60384-14
IEC60384-14
Class
Class X2
Class X2
Class X2
Class X2
Certification organization
UL
VDE
✽ When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUA, 0.1 μF.
✽ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No.
Specifications
Category temperature range
Rated voltage
Rated capacitance
Capacitance tolerance
Dissipation factor (tan d)
Withstand voltage
Insulation resistance (IR)
Maximum AC voltage ✽
−40 °C to +110 °C
275 V.AC
0.10 μF to 2.2 μF
±10 % (K), ±20 % (M)
C < 1.0 μF : tan d < 0.1 % ( 20 °C, 1 kHz )
C > 1.0 μF : tan d < 0.2 % ( 20 °C, 1 kHz )
Between terminals : 633 V.AC, 1183 V.DC, 60 s
Between terminals to enclosure : 2050 V.AC, 60 s
C < 0.33 μF : IR > 15000 MΩ
(20 °C, 100 V.DC, 60 s)
C > 0.33 μF : IR > 5000 MΩ ∙ μF (20 °C, 100 V.DC, 60 s)
C < 0.47 μF : IR > 2000 MΩ
(20 °C, 500 V.DC, 60 s)
310 V.AC
✽ Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave).
✽ A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no influence on the reliability of the capacitor.
(Suitable for series to the mains usage - for more details, please contact your Panasonic contact person.)
✽ Maximum AC voltage including line voltage fluctuation is 310 V.AC.
310 V.AC is not nominal continuous applied voltage, but only indicates maximum value including in the voltage ofthe power supply. Basic nominal voltage
is considered as 240 V.AC.
This maximum AC voltae is specified in only ECQUA type, not specified in other types.
Please refer to individual product specification, and contact us for further questions regarding design life.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016
Plastic Film Capacitors
Dimensions
L±0.5✽
Marking Example
Cut lead
(Suffix A)
(A) side
4.0±0.5
F±0.4
20 min.
H±0.5✽
T±0.5✽
0d±0.05
ECQUA104
275V ~ X2
Solder-plated
copper-clad steel wire
+1.4
Q –0.6
(B) or (C) side
K
(A)
(C)
(B)
Note : Only ±10 ％ as cap. tol.
be marked as “K”．
P
(Lead location limits from center)
Note :
Date code.
Unit : mm
Rating · Dimensions · Quantity
● Capacitance
tolerance : ±10 %(K), ±20 %(M)
Cap.
(μF)
Part No.
ECQUAAF104◻(
ECQUAAF154◻(
ECQUAAF224◻(
ECQUAAF334◻(
ECQUAAF474◻(
ECQUAAF684◻(
ECQUAAF105◻(
ECQUAAF155◻(
ECQUAAF225◻(
)
)
)
)
)
)
)
)
)
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
L
17.5
17.5
17.5
17.5
26.0
26.0
26.0
31.0
31.0
T
5.0
6.0
7.5
9.0
8.5
10.0
12.0
12.0
14.5
Dimensions (mm)
H
F
fd
12.0
15.0
0.6
13.0
15.0
0.6
14.0
15.0
0.6
16.0
15.0
0.6
15.0
22.5
0.8
17.0
22.5
0.8
19.0
22.5
0.8
22.0
27.5
0.8
24.5
27.5
0.8
P
0±0.8
0±0.8
0±0.8
0±0.8
0±0.8
0±0.8
0±0.8
0±0.8
0±0.8
Q
1.3
1.3
1.3
1.3
1.8
1.8
1.8
1.8
1.8
Min. order Q'ty
Straight Cut lead
1000
600
500
300
200
1000
800
500
300
200
✽ ◻ : Capacitance tolerance code
( ) : Suffix for lead form
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016