SHD116222 SHD116222B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 642, REV. B Formerly part number SHD1162/A/B SILICON SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Features: Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current Symbol VRWM IF(AV) IFSM EAS IAR Maximum Thermal Resistance R Max. Junction Temperature Max. Storage Temperature TJ Tstg JC Condition 50% duty cycle, rectangular wave form 8.3 ms, half Sine wave Max. 45 15 Units V A 280 A TJ = 25 C, IAS = 3.0 A, L = 4.4 mH IAS decay linearly to 0 in 1 s limited by TJ max VA=1.5VR 20 mJ 3.0 A (Junction to Mounting Surface, Cathode) 1.7 C/W - -65 to +175 -65 to +175 C C Electrical Characteristics Characteristics Max. Forward Voltage Drop Max. Reverse Current Symbol VF1 VF2 IR1 IR2 Max. Junction Capacitance CT Condition @ 15A, Pulse, TJ = 25 C @ 15A, Pulse, TJ = 125 C @VR = 45V, Pulse, TJ = 25 C @VR = 45V, Pulse, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) Max. 0.64 0.57 400 Units V V A 15 mA 800 pF © 2000 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD116222 SHD116222B SENSITRON DATA SHEET 642, REV. B Formerly part number SHD1162/A/B MECHANICAL DIMENSIONS: In Inches / mm .375±.020 (9.52±.508) .225±.010 (5.71±.254) .225±.010 (5.71±.254) .225±.010 (5.71±.254) .150±.010 (3.81±.254) .225±.010 (5.71±.254) SHD-1 .015±.005 (.381±.127) SHD-1B Copper Anode .075 (1.91) Max .090 (2.29) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring Alumina Ring Moly Base Moly Base (Cathode) .015±.002 (.381±.051) .060±.010 (1.52±.254) Typical Forward Characteristics Typical Reverse Characteristics 102 Instantaneous Reverse Current - I R (mA) 175 °C 101 125 °C 150 °C 125 °C 100 100 °C 10-1 75 °C 50 °C 10-2 25 °C 10-3 0 100 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - FV(V) 10 20 30 Reverse Voltage - R V (V) 40 50 Typical Junction Capacitance 25 °C 0.8 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 175 °C 101 800 700 600 500 400 300 200 0 10 20 30 Reverse Voltage - R V (V) © 2000 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 40 50 SHD116222 SHD116222B SENSITRON DATA SHEET 642, REV. B Formerly part number SHD1162/A/B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2000 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]