K e y f e at u r e s + b e n e f i t s 804A Video test Generator The 804A Video Test Generator supports pixel rates up to 300 MHz on its HDMI outputs. This enables testing of high end HDTVs with 4K ultra High Def capability including NEW! tests for 4K at 50/60Hz using HDMI 2.0 4:2:0 pixel encoding. The instrument also supports testing of 21:9 format resolutions at or below 300MHz pixel rate. The rack mountable 804A is optimized for testing modern HDMI flat panel TVs on a production line. It features four (4) HDMI outputs—all active simultaneously—for testing HDTVs with multiple HDMI inputs. This eliminates the need for splitters often required for testing each HDMI input on an HDTV. The 804A can also output component analog and composite analog for testing an HDTVs analog video outputs. The 804A is equipped with all the standard video timings up to 300 MHz and test patterns including 3D patterns and tests for HDMI protocols such as HDCP, EDID and CEC. The 804A tests compressed and uncompressed HDMI audio formats using a variety of audio test signals. An HDTV’s analog audio inputs can also be tested using the 804A’s programmable analog audio outputs. Four (4) HDMI outputs Max pixel clock 24 bit color: 300MHz; e.g. 4Kx2K 30Hz. 4K 50/60Hz with 4:2:0 pixel encoding per HDMI 2.0 Max pixel clock 36 bit color: 165MHz; e.g. 1080p60 Max TMDS rate 300MHz; 3.00Gb/s per channel. Analog video outputs Test HDTVs analog component and composite video inputs. Standard video timings and patterns Supports standard video timings and test patterns, including HDMI 3D test images as specified by the HDMI 1.4a specification. HDMI and analog audio outputs Support HDMI compressed and uncompressed audio formats Various patterns with programmable amplitude, sampling rate and bit depths. Serial command line interface RS-232 and USB interface for command line control or for automated test system. Rack mountable Fits in a standard 19” relay rack. Occupies two rack units. Color touch display Monitor the status of the test on the color display. Configure the 804A through the touch interface. USB host interface (Optional) Attach a keypad for simplified testing 804A Front 804A Power Switch Color Touch Display LEDs SD Card Slot USB Device Interface Back USB Host (Optional) HDMI 1 - 4 Output Composite Video Output VGA S-Video Analog Output Video Output Digtal Audio S/PDIF Input Analog Analog Digital Component Audio Audio Output Output Input Power RS-232 Control SPECIFICATION Formats (timing) Formats Over 110 standard timings for Consumer Electronics, Computer Test Patterns Patterns Over 35 standard test patterns add custom bitmaps Moving pattern ZonePlate, PGCwrgb, imported bitmap HDMI 3D 3D images; add 3D bitmap images 3D Formats Top-and-Bottom, Side-by-Side, Frame Packing Special test patterns Functions HDCPprod HDCP EDIDTest EDID CEC CEC Ping HDMI (DVI) Connector (4) HDMI Type A Video Pixel rate up to 300 MHz TMDS clock rate up to 300 MHz (3.00 Gb/s per channel) Max resolution 4K x 2K at 30Hz; 4K UHD at 50/60Hz with HDMI 2.0 4:2:0 pixel encoding Encoding (HDMI) RGB / YCbCr Encoding (DVI) RGB Sampling mode (HDMI) 4:4:4 / 4:2:2 / 4:2:0 (per HDMI 2.0) Sampling mode (DVI) 4:4:4 Color depth (HDMI) 24, 30 & 36 bits per pixel Max TMDS clock rate with deep color225MHZ Color depth (DVI) 24 bits per pixel Color space ITU BT.601 & BT.709 Audio Sampling rates (kHz) 32.0, 44.1, 48, 88.2, 96, 176.4, 192.0 Number of channels 2 to 8 Audio content FL, FR, LFE, RL, RR, RC, FLC, FRC, RLC Bits per sample 16, 20, 24 Audio formats LPCM, Dolby Digital, DD+, DTS-ES Frequency range 10Hz to 20kHz in 1Hz increments (sine wave LPCM) Amplitude -99dB to 0dB in 1dB increments YPbPr Component Analog Video output Connector Component analog (3) BNC Video Bit depth 24 bit color Pixel rate Up to 80MHz (resolutions above 80MHz are supported through pixel doubling. Colorimetry YPbPr Sync type Composite RGB Component Video output Connector VGA D-Sub Video Bit depth 24 bit color Pixel rate Up to 80MHz (resolutions above 80MHz are supported through pixel doubling. Colorimetry RGB, YPbPr Sync Type Separate and Composite Analog Composite Video output Connector CVBS (1) BNC Y/C S-Video Video Encoding NTSC, PAL Pixel Rate range 13.5 - 13.52mHz Sync Type Composite Analog Audio Output Connector Audio parameters Audio channels Audio signal Frequency range Amplitude Digital Audio Input Connector Color Touch Display Screen Size Color 480(H) x 272(V) 24 bit RGB Administration Interfaces RS-232 Automated command line control USB host - back Attachable keypad USB peripheral - front Updating firmware / gateware and command line SD Card - front Updating firmware / gateware Dimensions / Weight Dimensions Height Width Depth Weight 3.25 inches; 8.3 cm 16.5 inches; 41.9 cm 6.1 inches; 15.5 cm 6.62 lbs; 3.0 kg Power Voltage range Frequency Power 100 - 240 -VAC 50 - 60 Hz 24 VA Environmental Humidity Temperature 30% to 80% RH non-condensing 32 - 104 Deg F; 0 – 40 deg C (2) RCA 2 (L R) Sine wave 10Hz to 20kHz in 1Hz increments -99dB to 0dB in 1dB increments Specifications are based on hardware and firmware revisions available as of March 2014, and are subject to change without notice. HDMI, the HDMI logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI \ Licensing LLC. Revised 03/04/14 Optical, S/PDIF