TWN4 Legic® NFC 125kHz/134.2kHz & 13.56MHz Contactless Reader/Writer TWN4 OEM PCB Bottom View TWN4 OEM PCB Top View Desktop Top View Elatec’s TWN4 Family allows users to read and write to almost any 125kHz/134.2kHz and 13.56MHz tags and/or labels. It supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, INSIDE etc. and ISO standards like ISO14443A/B including layer 4 (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). The new generation is a direct enhancement to the successful TWN3 family as it comes in the same mechanical dimensions (OEM PCB and Desktop Housing). Desktop supports host communication via USB or RS232. Special Features: Powerful SDK for writing Apps which are executed directly on the reader Infield Upgradeable Direct chip-commands support Two onboard SAM sockets (Secure Access Module)1) CCID and PC/SC 2.011) Additional interfaces for OEM PCB version o I²C, SPI2), Clock/Data3), Wiegand3), CAN2)3) o Dedicated expansion bus for connection of LCD, mass storage, etc. o 8 GPIOs Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com Technical Data4) Frequency Housing Dimensions (L x W x H) Power Supply Current Consumption Temperature Range Read- / Write Distance HOST Interface OS Support Transmission Speed Modes of Operation Relative Humidity Supported Transponders Certifications MTBF Weight Order Code OEM Board USB black / white RS232 black / white 1)In 125kHz, 134.2kHz (LF) / 13.56MHz (HF) Material ABS UL94-V0, colour black or white Desktop Reader: 88mm x 56mm x 18mm / 3.5inch x 2.2inch x 0.7inch OEM Board: 76mm x 49mm x 14mm / 3.0inch x 1.9inch x 0.6inch 4.3V..5.5V via USB or RS232; RS232 requires external power supply; 3.3V +/- 5% via connector CNA RF field off: 20mA / Cyclic Operation: tbd2) / Power down Mode: tbd2) RF field on: 140mA typically Operating: -25°C up to +80°C (-13°F up to +176°F) Storage: -45°C up to +85°C (-49°F up to +185°F) Up to 100mm / 4inch (depending on transponder) USB, RS232, serial 5V CMOS TTL, I²C, SPI2), Clock/Data3), Wiegand3), CAN2)3) Windows XP, Vista, 7 (32-/64-bit), 8, Linux Host: USB: Full speed (12Mbit) – RS232: up to 115.200baud / Air: up to 424kbit/s USB key board emulation – USB virtual COM port – Transparent (direct chip-commands support) CCID and PC/SC 2.011) 5% to 95% non-condensing Standard: 125kHz / 134.2kHz 4100, 4102, 42005), AWID, Casi Rusco, HITAG 16), HITAG 26), HITAG S6), Keri, MIRO, Pyramid, TIRIS/HDX, UNIQUE Optionally, in consideration: 4305, Cardax, FDX-B, IDTECK, Q5, TITAN, T55x7, ZOODIAC 13.56MHz / Legic Advant 13.56MHz / Legic Prime 13.56MHz / ISO14443 A+B compatible to part 4 Mifare DESFire, Mifare Plus7), Mifare SmartMX7), my-d move7), PayPass7) Mifare Classic1), Mifare Ultralight, Mifare Ultralight C 13.56MHz / ISO15693 EM40357), Tag-It, my-d vicinity7), ICODE SLI, M24LR16/64, PicoPass7), HID iCLASS5) 13.56MHz / ISO18092 / NFC NFCIP-1: NFC Forum Tag Type 2-4 Sony FeliCa6) Version P: Standard + Cotag, G-Prox8), HID Prox, Honeywell Nexwatch, Indala, ioProx CE, R&TTE, RoHS-II compliant, FCC4) 500.000 hours Approx. 20 g (without housing) Standard Version P ART14241 ART14773 ART14242 / ART14243 ART14775 / ART14777 ART14244 / ART14245 ART14779 / ART14780 Preparation 2)On Request Only 3)External Interface Required 4)Target Specification 5)UID Only 6)Encryption Not Supported 7)UID/PUPI Only, Read/Write On Request 8)Hash Value Only Accessories Order Code ART13512 Snap-in holder for TWN3/TWN4 desktop ART11493 2.0m USB Type A cable for TWN3/TWN4 OEM PCB Order Code AC Wall Adapter ART14712 Europe ART14713 USA ART12240 2.0m RS232 DSUB 9 DC cable for TWN3/TWN4 OEM PCB ART14714 AUSTRALIA ART14715 UK Drawing/Pin Out Refer to document DS_TWN4 Reader Family Pinouts Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2013 Elatec GmbH – DocRev5 – 07/2013 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com