3.0A SMA Schottky Rectifier SS32A-SS310A

SS32A THRU SS310A
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 100 Volts
CURRENT 3.0 Ampere
DO-214AC (SMA)
FEATURES
Low profile surface mount package
Built-in strain relief
High switching speed
Low voltage drop, high efficiency
For use in low voltage high frequency inverters,
Free willing, and polarity protection applications
Guarding for over voltage protection
MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Solder plated, solderable per MIL-STD-750 method 2026
Polarity: Color band denotes cathode end
Weight: 0.002 ounce, 0.064 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified ,
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
PARAMETER
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL see figure 1 TL =105℃
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
rated load (JEDEC method)
SYMBOLS
SS
32A
SS
33A
SS
34A
SS
35A
SS
36A
SS
38A
SS
39A
SS
310A
UNIT
VRRM
VRMS
VDC
20
14
20
30
21
30
40
28
40
50
35
50
60
42
60
80
56
80
90
63
90
100
70
100
Volts
Volts
Volts
I(AV)
3.0
Amps
IFSM
80
Amps
Maximum Instantaneous Forward Voltage
@ 3.0A(Note1)
VF
Maximum DC Reverse Current at
rated DC Blocking Voltage per
element
IR
TA = 25℃
RθJL
TJ
TSTG
0.85
0.5
mA
55
12
-55 to +150
Email: [email protected]
Volts
10.0
RθJA
Operating Junction Temperature
Storage Temperature Range
1. Pulse test: 300μs pulse width,1% duty cycle
2. PCB mounted with 0.2×0.2″(5.0 × 5.0mm) copper pads
Website: www.kingtronics.com
0.70
20.0
TA = 100℃
Typical Thermal Resistance (Note 2)
0.55
℃/W
-55 to +150
-55 to +150
Tel: (852) 8106 7033
℃
℃
Fax: (852) 8106 7099
1
SS32A THRU SS310A
RATING AND CHRACTERISTIC CURVES
Note: Specifications are subject to change without notice.
Website: www.kingtronics.com
Email: [email protected]
Tel: (852) 8106 7033
Fax: (852) 8106 7099
2