4635

SENSITRON
SEMICONDUCTOR
SHD119568
SHD119568P
TECHNICAL DATA
DATA SHEET 4635, REV.A
HERMETIC POWER SCHOTTKY RECTIFIER
(SINGLE / DUAL)
DESCRIPTION: A 15 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC LCC-3P PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=70 C)
SYMBOL
MAX.
UNITS
PIV
15
Volts
IO
45
Amps
IFSM
200
Amps
CT
3600
pF
RJC
1.07
C/W
Top/Tstg
-65 to
+ 175
C
Vf
0.52
Volts
(Single)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE
(Vr =5V)
MAXIMUM THERMAL RESISTANCE
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps)
TJ = 25 C
0.46
TJ = 75C
MAXIMUM REVERSE CURRENT (Ir @ 15 V PIV)
TJ = 25 C
TJ = 100 C
Ir
20
1000
2004 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
mA
SENSITRON
SEMICONDUCTOR
SHD119568
SHD119568P
TECHNICAL DATA
DATA SHEET 4635, REV. A
MECHANICAL DIMENSIONS: IN Inches / mm
SINGLE
COMMON CATHODE
.145
(3.68)
1
.037
(.94)
.030 (.76) Min.
.375
(9.53)
1
2
3
2
1
3
.050 (1.27)
2
.140 (3.56)Typ.
.035 (.89) Min. .450 (11.43)
3
.415
(10.54)
.157 (3.99)
LCC-3P
.625
(15.88)
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
COMMON CATHODE - P
PIN 1
CATHODE
COMMON CATHODE
PIN 2
ANODE
ANODE 1
PIN 3
ANODE
ANODE 2
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
2004 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]