GPS Active Internal Patch APAM1568YE15V2.0 RoHS/RoHS II compliant ESD Sensitive 15.0 x 15.0 x 6.8mm MSL level: Not Applicable FEATURES: • Compact Size • Easy to Install • RoHS Compliant STANDARD SPECIFICATIONS: Antenna TYPICAL APPLICATIONS: APAM1568YE15V2.0 • Automotive Navigation, Marine buoys GPS Patch Antenna • Personal Tracking Date of Issue: May. 29•thSurveying , 2014 equipment, Cell 15.0phone, x 15.0Laptop x 6.8mm • Healthcare and medical monitoring devices, PND, PDA Page (3) of (11) Abracon Drawing # 453886 4.0 Parameters Center Frequency Typ. 1575.42± 1.02 Max. 5 Units MHz MHz Note dBic (Peak gain on70*70mm Ground Plane facing Zenith.) 1.5 Gain VSWR @ Center Frequency Polarization Model Impedance Working Temperature Storage Temperature Revision Smith Chart Min. Bandwidth ES 1.5 RHCP 50 (Right Hand Circular Polarization) -25 -45 Ω ˚C ˚C +72 85 Low Noise Amplifier (LNA) Parameters Center Frequency DC Voltage Gain Output VSWR Noise Figure DC current SMITH CHART Min. Typ. Max. 1575.42± 1.02 2.70 3.30 18 1.5 1.3 3.5 5.0 Test Condition: 13x13mm Ground ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Units MHz Note dB (Without cable +25˚C± 10˚C) V Test Condition: 15x15mm Ground (+25˚C± 10˚C) (At 3.0V) mA GPS LNA GainGPS Plot LNA GAIN PLOT Test Condition: 3.0V DC Test Condition: 3.0V DC Visit www.abracon.com forTerms & Conditions of Sale Revised 06.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Internal Patch APAM1568YE15V2.0 RoHS/RoHS II compliant 15.0 x 15.0 x 6.8mm OUTLINE DIMENSION: L1 Description Antenna Type PCB Shielding RF Cable RF Connector Thickness Material Dielectric Ceramics FR4 Tinplate φ0.81±0.1mm, L1=30±2mm, L=36±2mm I-PEX 6.8mm Max ve Release Tolerance: ±0.2mm Unit: mm PACKAGING : Package Type Tray Vacuum Bag Outer Box Quantity 50 pcs/tray 200pcs/box 1000 pcs/box ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised 06.23.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com