2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. 2.07 52.6 M12 THREAD B POSITION 4 POSITION 3 0.39 9.8 0.417 10.60 0.77 0.59 19.5 15.0 POSITION 1 POSITION 2 .67/17 ACROSS FLATS NOTES: 1. CONSTRUCTED TO MEET THE CONNECTOR STANDARDS ISO 11801, IEC 61076-2-101 AND IEC 60532-4. 2. THE TRANSMISSION PERFORMANCE IS 10/100MBIT ETHERNET AND IS ADEQUATE FOR PoE ACCORDING TO IEEE.3.At 3. MEETS THE FOLLOWING CATEGORIES: A. CATEGORY 5E/CLASS EA PER ISO/IEC 11801 DIM EN 50173-1 4. ELECTRICAL: A. WORKING VOLTAGE: 50V B. WORKING CURRENT: 4A C. NUMBERS OF CONTACTS: 4 D. CONTACT GENDER: PIN 5. MECHANICAL: A. TERMINATION CYCLES WITH SAME CROSS SECTION WIRE: 10 B. RECOMMENDED TIGHTENING TORQUE: 0.443 FL/LBS [0.6N/M] C. HEXAGONAL WRENCH: SW 13MM 6. CABLE CONSTRUCTION ACCEPTANCE: A. CONDUCTOR DIAMETER: 1. SOLID: TESTED WITH 0.025" [0.64MM] PROFIBUS CABLE 2. STRANDED: 26/7 AWG-22/7 AWG, 0.017"-0.026" [0.42MM-0.66MM] B. INSULATION DIAMETER (DIAMETER OF DIELECTRIC (DOD): 0.043"-0.079" [1.10MM-2.00MM] C. CABLE DIAMETER (DIAMETER OF JACKET (DOJ)): 0.213"-0.283" [5.4MM-7.2MM] 7. CONSTRUCTION: A. ALL MATERIALS AND COMPONENTS USED MUST MEET THE MATERIAL RESTRICTIONS OF RoHS, (EUROPEAN DIRECTIVE 2011/65/EU ON THE RESTRICTION OF HAZARDOUS SUBSTANCES) AS PROPOSED BY THE RoHS TECHNICAL ADAPTATION COMMITTEE. B. COMPONENT MATERIALS: 1. LOCK NUT: (ZN) DIECAST/(NI) PLATED 2. SEAL: PA 6.6 AND TPU 3. SPLICE ELEMENT: (ZN) DIECAST, (NI), PLASTIC PART IS PA 6.6 4. CONNECTOR HOUSING: (ZN) DIECAST, (NI) PLATED AND PLASTIC PART IS PA 6.6 5. CONTACTS: BRASS/(AU) PLATED 8. ENVIRONMENTAL: A. AMBIENT TEMPERATURE: +23 F-302 F [-5 C-+150 C B. OPERATING TEMPERATURE: -13 F-+185 F [-25 C-+85 C] C. STORAGE TEMPERATURE: -13 F-+185 F [-25 C-+85 C] D. INGRESS PROTECTION RATING (IP): IP65/IP67 9. c(UL)us MEETS UL1683, CSA C22.2 10.WEIGHT: 0.12 LBS/10 PCS [531.2g/20 PCS] PART NUMBER B PRODUCT SPEC/PKG SPEC ISPS5E44MFA N/A I.I. NUMBER WORK INSTRUCTION N/A N/A TITLE FIELD TERMINABLE M12 D-CODE 4 POSITION CONNECTOR A CUSTOMER DRAWING ITEM REVISION NAME 13M438AM/00 DATASET FILE NAME 13M438AM_DC02/00A D10100DA/14 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] R 1-27-14 BJN DCS GAZ RELEASED TO PRODUCTION .X .1 [2.54] .XXX .XX .01 [.25] ANGLES 13M438AM-02 REV DATE BY CHK APR DESCRIPTION 2 ECN .005 [.127] 5 THIRD ANGLE PROJECTION DRAWN BY BJN DATE CHK 1-27-14 MATERIAL: DRAWING NUMBER: 13M438AM-02 SIZE SCALE FULL DCS 1 SHT 1 OF 1 A A