UZ5706 SERIES UZ5806 SERIES 5 WATT ZENER DIODES High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Zener Voltage (VZ): 6.8 to 400V Continuous Current: See Table Surge Current ( 8.3 ms): See Table Surge Power: See Graph Power: See Lead Temperature Derating Curve Storage and Operating Temperature: -65°C to +175°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Electrical Specifications at 25°C Nominal Zener Voltage † VZ @ lZT Type* Test Current lZT Maximum Ratings Maximum Reverse Leakage Current Max. Zener Impedance § ZZ @ lZT lR +5% VR +10% VR Typ. Temp. Coeff. Tc @ lZT Maximum Continuous Current lZM Maximum Surge Current ‡ lS +5% Tolerance +10% Tolerance Volts mA Ohms μA Volts Volts %/°C mA Amps UZ5706 UZ5806 6.8 175 1.0 500 5.2 4.9 .05 675 40 UZ5707 UZ5807 7.5 175 1.5 400 5.7 5.4 .06 620 32 UZ5708 UZ5808 8.2 150 1.5 200 6.2 5.9 .06 570 24 UZ5709 UZ5809 9.1 150 2.0 100 6.9 6.6 .06 510 22 UZ5710 UZ5810 10.0 125 2.0 75 7.6 7.2 .07 470 20 UZ5712 UZ5812 12 100 2.5 50 9.1 8.6 .07 385 18 UZ5713 UZ5813 13 100 3.0 25 9.9 9.3 .08 350 16 UZ5714 UZ5814 14 100 3.0 20 10.6 10.1 .08 320 14 UZ5715 UZ5815 15 75 3.5 15 11.4 10.8 .08 300 12 UZ5716 UZ5816 16 75 3.5 10 12.2 11.5 .08 275 10 UZ5718 UZ5818 18 65 4.0 10 13.7 12.9 .085 255 9.0 UZ5720 UZ5820 20 65 4.5 10 15.2 14.4 .085 220 8.0 UZ5722 UZ5822 22 50 5.0 10 16.7 15.8 .085 195 7.0 UZ5724 UZ5824 24 50 5.0 10 18.2 17.3 .090 180 6.5 UZ5727 UZ5827 27 50 6.0 10 20.6 19.4 .090 155 6.0 Rev. 20150727 UZ5706 SERIES UZ5806 SERIES 5 WATT ZENER DIODES High-reliability discrete products and engineering services since 1977 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Electrical Specifications at 25°C Nominal Zener Voltage † VZ @ lZT Type* Test Current lZT Maximum Ratings Maximum Reverse Leakage Current Max. Zener Impedance § ZZ @ lZT lR +5% VR +10% VR Typ. Temp. Coeff. Tc @ lZT Maximum Continuous Current lZM Maximum Surge Current ‡ lS +5% Tolerance +10% Tolerance Volts mA Ohms μA Volts Volts %/°C mA Amps UZ5730 UZ5830 30 40 8 10 22.8 21.6 .090 140 5.5 UZ5733 UZ5833 33 40 10 5 25.1 23.7 .090 130 5.0 UZ5736 UZ5836 36 30 11 5 27.4 25.9 .095 120 4.5 UZ5740 UZ5840 40 30 14 5 30.4 28.8 .095 105 4.0 UZ5745 UZ5845 45 30 20 5 34.2 32.4 .095 95 3.5 UZ5750 UZ5850 50 25 25 5 38.0 36.0 .095 85 3.0 UZ5756 UZ5856 56 20 35 5 42.6 40.3 .095 80 2.8 UZ5760 UZ5860 60 20 40 5 45.7 43.2 .100 75 2.5 UZ5770 UZ5870 70 20 50 5 53.3 50.5 .100 65 2.3 UZ5775 UZ5875 75 15 55 5 56.0 54.0 .100 60 2.0 UZ5780 UZ5880 80 15 80 5 60.8 57.7 .100 55 1.8 UZ5790 UZ5890 90 15 90 5 68.5 64.8 .100 50 1.6 UZ5110 UZ5210 100 10 100 5 76.0 72.0 .100 45 1.4 UZ5111 UZ5211 110 10 125 5 83.6 79.2 .100 40 1.2 UZ5112 UZ5212 120 10 170 5 91.2 86.4 .100 38 1.0 Temperature Range: Operating and Storage -65° to +175°C Notes: * Specify 20% tolerance by changing the second numeral of type number from 8 to 9 (UZ5809 becomes UZ5909) or from 2 to 3 (UZ5211 becomes UZ5311) † All zener voltages are measured with an automated test set using a 35 millisecond test time. Longer or shorter test times will have a corresponding effect on the measured value due to the heating effects. § Zener impedance is derived from the 60-cycle AC voltage created when AC current with RMS value of 10 % of DC zener test current is superimposed on the test current. Maximum current based on 5 watt rating. See lead temperature derating curves for proper mounting methods. Rev. 20150727 High-reliability discrete products and engineering services since 1977 UZ5706 SERIES UZ5806 SERIES 5 WATT ZENER DIODES MECHANICAL CHARACTERISTICS Case: Digi B Polarity: Cathode band VF: IC = 1.0 A; VF = 1.35 V Max Rev. 20150727