ABS07-120-32.768kHz-T; TUNING FORK CRYSTAL 32.768kHz SMD; ESR OPTIMIZED CRYSTAL Pb RoHS/RoHS II 3.2 x 1.5 x 0.9 mm | | | | | | | | | | | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: • Guaranteed ESR of 60kΩ Maximum for Low Power Designs • 0.9mm height ideal for high density circuit boards • Seam sealed ceramic package offers excellent environmental & heat resistance • Extended Operating temperature of -40°C to +85°C for industrial applications APPLICATIONS: • Power sensitive designs requiring Low ESR Crystal, such as ST-Micro MCU STM32L based solutions • Communication & measurement equipment • Commercial, Consumer & Industrial applications • Wireless communications • PDA and Smartphone STANDARD SPECIFICATIONS Parameters Minimum Frequency Typical Maximum 32.768 Operation Mode Operating Temperature Units Notes kHz Tuning Fork – AT Cut Storage Temperature Frequency Tolerance @+25°C Temperature Coefficient: Turn-over temperature: Equivalent series resistance (R1) Shunt capacitance (C0) Motional capacitance (Cm) Load capacitance (CL) Drive Level Q value Aging@25°C±3°C Insulation Resistance -40 +85 ºC -55 +125 ºC -20 -0.045 +20 +20 -0.025 +30 60 ppm ppm/T² ºC kΩ pF fF pF µW Tested at 0.1uW ppm MΩ First year @ 100Vdc ± 15V 3.0 -0.035 +25 55 1.20 3.7 6.0 0.1 4.4 0.5 13000 -3 500 3 PART IDENTIFICATION: ABS07-120-32.768 kHz-T FREQUENCY VARIATION OVER OPERATING TEMPERATURE; RELATIVE TO MEASURED FREQUENCY AT 25ºC 120 ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Temp °C -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 (ppm) Low -105.63 -90.00 -75.63 -62.50 -50.63 -40.00 -30.63 -22.50 -15.63 -10.00 -5.63 -2.50 -0.63 0.00 -0.63 -2.50 -5.63 -10.00 -15.63 -22.50 -30.63 -40.00 -50.63 -62.50 -75.63 -90.00 (ppm) Typ -147.88 -126.00 -105.88 -87.50 -70.88 -56.00 -42.88 -31.50 -21.88 -14.00 -7.88 -3.50 -0.88 0.00 -0.88 -3.50 -7.88 -14.00 -21.88 -31.50 -42.88 -56.00 -70.88 -87.50 -105.88 -126.00 (ppm) High -190.13 -162.00 -136.13 -112.50 -91.13 -72.00 -55.13 -40.50 -28.13 -18.00 -10.13 -4.50 -1.13 0.00 -1.13 -4.50 -10.13 -18.00 -28.13 -40.50 -55.13 -72.00 -91.13 -112.50 -136.13 -162.00 Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ABS07-120-32.768kHz-T; TUNING FORK CRYSTAL 32.768kHz SMD; ESR OPTIMIZED CRYSTAL Pb RoHS/RoHS II 3.2 x 1.5 x 0.9 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Note #3: Due to material availability, the outline and finish color of the component lid may vary. This variation in no way affects the electrical performance of the product. All dimensions are in mm REFLOW PROFILE: Application \ Temperature Time Lead Free ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED T1 / t1 260 ± 5ºC / 10-seconds Max. T2 / t2 225 Min / 60 Seconds Max. Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ABS07-120-32.768kHz-T; TUNING FORK CRYSTAL 32.768kHz SMD; ESR OPTIMIZED CRYSTAL Pb RoHS/RoHS II 3.2 x 1.5 x 0.9 mm | | | | | | | | | | | | | | | TAPE & REEL: T=Tape and reel (3,000pcs/reel) ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE CERTIFIED RTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 11.14.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com