GPS Active Antenna Module - Magnet Base APAMP-129 RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) ESD Sensitive 44.0 X 37 X 14.5mm MSL level: Not Applicable FEATURES: • High Reliability/Sensitivity • Compact Size • Easy to install (magnet base) • ROHS Compliant TYPICAL APPLICATIONS: • Automotive Navigation • Automotive Monitoring • Personal Tracking STANDARD SPECIFICATIONS: Antenna Parameters Frequency Bandwidth VSWR at Center Frequency Polarization Model Impedance Gain Operating Temperature Storage Temperature Min. 1574.40 10.0 Typ. 1575.42 Max. 1576.44 Units MHz MHz Note 1.5:1 (Right Hand Circular Polarization) RHCP 50 5 -40 -45 Ω dBic ˚C ˚C +80 +85 (Based on 70× 70mm ground plane) Low Noise Amplifier (LNA) Parameters Frequency DC Voltage Gain Output VSWR Noise Figure DC current Min. 1574.40 2.5 25 Typ. Max. 1575.42 1576.44 3.5 3.0 27 29 2.0 1.5 10 12.5 Units MHz Note dB (+25°C ± 10°C) mA (+25°C ± 10°C) (At 3.0V) V ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS S11: Input VSWR ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Antenna Module - Magnet Base APAMP-129 ESD Sensitive RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 44.0 X 37 X 14.5mm LNA REFLECTION PROFILE S21: LNA Gain Test condition: DC 3.0V OUTLINE DRAWING: GPS Antenna Bottom View Side View Top View Parameters L (Cable Length) Antenna RF Cable PCB RF Connector Shielding Thickness Mounting Type ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Description 300±10cm Dielectric Ceramics RG174 FR4 SMA-JW3 Tinplate 15mm Magnet Base Unit:mm Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com GPS Active Antenna Module - Magnet Base APAMP-129 ESD Sensitive RoHS/RoHS II compliant Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 44.0 X 37 X 14.5mm PRODUCT IMAGE: PACKAGING: Each 475x215x215 mm size carton includes 100 pieces of antenna. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com forTerms & Conditions of Sale Revised: 10.30.14 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com