Product Brief SPIDER+ New SPI driver family Low-side, high-side and flexible devices (9 products) Infineon’s new integrated SPIDER+ family comprises 9 value scalable products. The simplified portfolio includes 2 LS (8 + 4 ch), 2 HS (8 ch) and 5 flexible devices (8 ch) with up to 6 configurable channels. Hence, a broad range of applications is addressable. Above all, the new 8 ch HS device offers a very cost efficient solution to drive small HS loads, including open load at ON detection. SPIDER+ devices have improved and additional functions, such as Limp Home and Cranking, very low current consumption, enhanced diagnosis features, excellent thermal performance (exposed pad packages) and an input mapping function for the 2 direct inputs. The family approach with consistent SPI registers, identical output stages for all channels and a comprehensive pin-to-pin compatibility reduce the design effort and offers cost down options/partitioning adjustments without a PCB re-design. Small 150 mil packages secures PCB space savings (= cost savings). A so called LED packet, optional available for HS and flexible devices, provides additional functions to optimize the control of LEDs and small bulbs (open load detection @ ON state, a bulb inrush mode and 2 internal PWM generators). Key features ››Limp Home and Cranking functionality implemented for all products (down to 3 V battery) ››Short circuit, overload and overtemperature protection ››Paralleling of outputs ››Very low current consumption in sleep mode ››16-bit SPI communication (5 MHz) ››Enhanced diagnosis capability ››2 PWM inputs with mapping function ››Optional LED packet for HS and flexible devices Block diagram of TLE75602-EMH Key benefits VS ››Highest operational safety ››Only one time design effort required VDD Temperature Sensor Over Load Detection Power Supply Open Load at ON IDLE Power Mode Control IN0 IN1 Limp Home Output Status Monitor Input Register Auto Configuring Gate Control Bulb Inrush Mode PWM Generator CSN SCLK SI SO Control, Diagnostic and Protective Functions Temperature Sensor Over Load Detection SPI Output Status Monitor Diagnosis Register Low-side Gate Control GND www.infineon.com/spider OUT2_D OUT3_D OUT4_D OUT5_D OUT6_D OUT7_D OUT7_S OUT6_S OUT5_S OUT4_S OUT3_S OUT2_S (family concept) ››High design flexibility: Up to 6 configurable channels ››Cost down options without re-design ››Entire path from microcontroller to loads trackable (supports ISO 26262) ››Cost efficient HS driver available ››PCB space savings (small packages) ››Unique functions with LED packet ››Value scalable product portfolio ››Excellent perform./price relation Applications OUT1_LS OUT0_LS ››Automotive/industrial. relays & solenoids ››Single LEDs and small bulbs ››Unipolar stepper motors Product Brief SPIDER+ New SPI driver family Low-side, high-side and flexible devices (9 products) Application diagram example for TLE75008-EMD VBatt VDD Loads RVDD VDD GPO GPO ZVS GPO MCU RIN IN0 RIN RLH RIDLE IN1 VDD RSI RSO GPI ZOUT4 ZOUT5 ZOUT6 ZOUT7 TLE75008-EMD OUT0_LS IDLE OUT1_LS OUT3_LS RSCLK GPO ZOUT3 OUT2_LS RDS GPO ZOUT2 VS Limp Home GPO ROUT1 CVS CVDD IN0_LH IN1_LH SPI OUT4_LS CSN OUT5_LS SCLK OUT6_LS OUT7_LS SI SO COUT COUT COUT COUT COUT COUT COUT COUT GND The 16-bit Serial Peripheral Interface (SPI) is used to control and diagnose the device and the loads. Input and output status registers in combination with the open load detection allows the diagnosis of the entire path from microcontroller to the loads. In limp home (fail safe mode) the input pins (IN0 + IN1) are directly routed to output channels 2 and 3. When the IDLE pin is “low”, the 2 output channels can be operated even w/o the presence of the digital supply voltage VDD, resp. the microcontroller. SPIDER+ product overview Product SOP Nominal load current (@ Tamb = 85° C) [mA] RDS(on) (typ @ 25 °C) [Ω] TLE75008-EMD Released 330 TLE75004-ELD Released 470 TLE75080-EMD 07/2016 330 1.0 TLE75080-EMH 07/2016 330 1.0 TLE75242-EMD 08/2016 330 1.0 TLE75242-EMH 08/2016 330 1.0 TLE75602-EMD Released 330 1.0 TLE75602-EMH Released 330 1.0 TLE75620-EMT Q4/2016 330 1.0 Published by Infineon Technologies AG 85579 Neubiberg, Germany © 2016 Infineon Technologies AG. All Rights Reserved. LED packet Number of flex channels Number of HS channels Number of Package LS channels Order number 1.0 8 PG-SSOP24-EP SP001082100 1.0 4 PG-SSOP14-EP SP001082104 PG-SSOP24-EP SP001082110 8 PG-SSOP24-EP SP001082246 2 8 4 2 PG-SSOP24-EP SP001117344 2 4 2 PG-SSOP24-EP SP001117342 6 2 PG-SSOP24-EP SP001082102 6 2 PG-SSOP24-EP SP001082252 6 PG-SSOP24-EP SP001117340 2 Please note! THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE. WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED APPLICATION. WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR THE INFORMATION GIVEN HEREIN AT ANY TIME. Order Number: B127-I0168-V2-7600-EU-EC-P Date: 02 / 2016 Additional information For further information on technologies, our products, the application of our products, delivery terms and conditions and/or prices, please contact your nearest Infineon Technologies office (www.infineon.com). Warnings Due to technical requirements, our products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by us in a written document signed by authorized representatives of Infineon Technologies, our products may not be used in any lifeendangering applications, including but not limited to medical, nuclear, military, life-critical or any other applications where a failure of the product or any consequences of the use thereof can result in personal injury.