Significant Events in TMS TWT Products History 1959 MEC (Microwave Electronics Corporation) formed by Dr. Stanley Kaisel to design and manufacture low power broadband metal ceramic Traveling Wave Tubes; occupied 10,000 sq. ft. facility in Palo Alto, CA 1964 Acquired Sylvania High Power TWT product line 1965 MEC acquired by Teledyne and becomes Teledyne MEC 1966 First high power broadband TWT 1967 Bulk Acoustic Delay Device 1976 First multi-octave Traveling Wave Tube 1984 Opened 75,000 sq ft manufacturing facility in Rancho Cordova, CA 1994 Developed Tri-Band communication TWT 2004 Opened 85,000 sq. ft. addition to Rancho Cordova, CA facility 2008 Shipped 3,000th Tri-Band TWT 2009 50th anniversary of TWT innovations 2009 First U.S. Military Airborne High Power Amplifier Delivered 2012 Joined six other Teledyne microwave companies to form Teledyne Microwave Solutions, combining experience and leadership to provide products from components to integrated assemblies and technologies from GaAs and TWT to GaN and beyond. 2012 MEC 3080RMI Program delivered 1000th TWT to Raytheon 2013 First 500W Satellite Communications High Power Amplifier delivered 2013 First UHF Solid State High Power Amplifier delivered 2013 Total number of TWTs shipped exceeded 78,000 Company Profile Teledyne Microwave Solutions (TMS) delivers advanced microwave technologies for demanding aerospace, military, commercial, and industrial applications. From catalog parts and single function components to integrated assemblies, sub-systems, and custom solutions, TMS solves the most complex microwave challenges. TMS has been an industry pacesetter in the design, development, and manufacture of sophisticated microwave products for over 50 years. Forged from the consolidation of seven leading microwave companies, TMS has the expansive R&D and manufacturing capabilities needed to research, design, develop, and manufacture products from RF through 220 GHz. The collaboration and combined R&D power of Teledyne TWT Products (MEC), Teledyne Microwave, Teledyne Labtech, Teledyne Paradise Datacom, Teledyne KW Microwave, Teledyne Cougar, and Teledyne Defence Ltd. have enabled TMS to create a host of new products across a wide range of disciplines, including remote body scanners, radar and threat detection systems, and ultra compact satellite communication amplifiers. Our veteran staff of engineers, machinists, chemists, technicians, and assemblers are continually developing new products to meet the industry’s most sophisticated and exacting standards. With nine manufacturing sites and the ability to provide local customer support across six continents, we collaborate closely with our customers to produce the custom configuration or off-the-shelf solution that meets their needs, and deliver it with speed and precision. With global reach and the industry’s most comprehensive portfolio of microwave technologies, Teledyne Microwave Solutions is truly Everything Microwave, Everywhereyoulook™. 2014-1 Teledyne TWT Products, a business unit of Teledyne Microwave Solutions, is a world leader in the design, development and manufacture of broadband high power helix Traveling Wave Tubes (TWTs), TWT Amplifiers (TWTAs), and Solid State High Power Amplifiers (SSPAs) from 10MHz to 44GHz, for top performance in the stringent fixed and mobile environments used in today’s ECM, radar and communications markets. Our state of the art products are found on nearly all major EW, Radar, and Communication platforms of the United States and its allies throughout the world. TMS recognizes and strives to meet the needs of our customers with quality, value, and service at competitive prices. We look forward to meeting your needs with these same standards of excellence. 1 TWTs and More Teledyne Microwave Solutions Manufactures Broadband, High Power Helix Traveling Wave Tubes for . . . Communications Highly efficient TWTs for Tri-Band, C, X, Ku, C/Ku, X/Ku, DBS, Ka and Ka/Q Band for use in Earth, Mobile and Fly-Away Terminals. EW and Radar Shadow Gridded Helix TWTs for Broadband EW and Radar Applications from L through Ku Bands at Peak Power Levels to 12 kW and Average Power Levels to >700 W. Instrumentation/General Purpose CW and Pulse TWTs for General Laboratory Amplifier Use Spanning the 1 to 44 GHz Frequency Range with Average Output Power to 750 W. The Continuing Role of TWTs Although developments in GaN and LDMOS technologies have boosted the power output of solid state amplifiers, TWTs are still the benchmark in performance and efficiency for many applications. For example, for multi-octave high power generation, TMS TWTs are smaller, lighter, and more efficient than equivalent SSPA assemblies. SSHPAs - TRMs - HPAs In addition to industry-leading TWT expertise, the TMS group leverages its collective capabilities to design and build Solid State High Power Amplifiers (SSHPAs) and High Power Amplifiers (HPAs) for defense, commercial, and communications applications. And when Solid State is mandated for a function previously filled by a TWT, TMS has the experience to design and manufacture TWT Replacement Modules (TRMs) for a smooth transition. 2 3 Solid State High Power Amplifiers TMS provides in–house Solid State High Power Amplifier (SSHPA) design capability and total solutions to meet the most demanding requirements in today’s and next generation ECM, radar and communications transmitter markets. For customer-driven designs, whether new, complementing or replacing a mature TWTA system with a SSHPA, our product development and manufacturing experience allows us to select the best suited solid state device technology to satisfy the power, reliability and mechanical specifications for airborne, shipboard and transport vehicle environment hardware. Our standard line of SSHPAs provides a comprehensive selection of frequency ranges, from UHF to Ku-Band, CW or pulsed power from 100W to kW in compact, hermetically sealed packages for operation over -40°C to +80°C in conjunction with air and liquid cooling techniques. TMS SSHPAs: Power vs. Frequency Teledyne’s historical position and experience in the TWT market provides the SSHPA R&D team with a unique perspective and understanding of requirements for TWT Replacement Modules (TRMs), which has resulted in proprietary solutions to RF high power combining and heat management problems. Full circuit, EM field, thermal and structural modeling capabilities provide efficient and optimized custom solid-state amplifier designs utilizing the LDMOS, GaN and GaAs devices best suited for frequency band, power and mode of operation. The advent of highly rugged LDMOS power devices and ever higher power GaN HEMT MMICs, for frequencies up to S-Band and Ka-Band respectively, can make the SSHPA a cost and performance competitive solution, with higher reliability than its TWT counterpart. Our internal manufacturing, environmental test and quality engineering resources assure a short product design cycle and a time-efficient field deployment schedule. TMS’s 250W to 1kW X-Band Solid State Power Amplifier offers superior RF performance for commercial & military markets. With options available for 1GHz Bandwidth anywhere in the 8-11GHz band, the amplifier provides 250W, 500W and 1000W peak output power. 4 Solid State High Power Amplifiers Solid State High Power Amplifier Typical Feature Set • Specific frequency bands & multi-octave coverage • Inherent low harmonic levels or internal low pass filter • Proprietary RF power combining • Power stage open & short • CW or Pulsed operation mode • Circuit protection • Gain frequency response optimized • Output forward & reflected power monitoring • Output VSWR optimized for frequency range • Control & communication port 5 High Power Amplifiers (HPAs) Satcom High Power Amplifier Features • • • • • • Satellite uplink Compact Environmentally Sealed Housing Integrated Linearizer RF Sample port Alarms RS-232/422/485, Ethernet Options • BUC • Harmonic Filter A High Power Amplifier (HPA) typically consists of a single power amplification block (TWT), which incorporates a High Voltage Power Supply (HVPS) section ranging from 5 to 20 KV to provide power to the TWT. The HPA also includes secondary protection and control circuitry interfaced through an external Monitor & Control (M&C) connection. This external M&C connection is available in several interfaces, including RS-232, RS-422, RS-485 and Ethernet. Each HPA is equipped with a custom Graphic User Interface (GUI) optimized for customer comfort, HPA setup, and system compatibility. Depending on the particular application, additional filtering and/or protection, linearization circuitry, a Block Up Converter (BUC), and a pre-amplification block are incorporated into the HPA. Common Specifications • • • • • • • 27.0-30.0 GHz 30.0-31.0 GHz 502W Peak Power 175W Linear Power @ flange w/-25dBc Intermodulation performance 73dB Small Signal Gain 100-240Vac -40C to +55C Operating temperature 502-Watt Peak Ka-Band HPA • High Linear Power • 502W Peak Power • Robust Design • Integral L-Band BUC (option) • Built around Teledyne’s Microwave MEC-5530 TWT 6 High Power Amplifiers (HPAs) TMS Satcom HPAs: Power vs. Frequency A Voltage Variable Attenuator (VVA) is used along with the preamplification section to adjust HPA gain dynamically across temperature to maintain tight gain flatness requirements. The VVA’s primary function is to select the desired RF output levels, under system control, based on the system mission. The BUC section (available for specific applications) allows baseband signals to drive the HPA at great physical cable length to minimize losses when the HPA is driven at higher frequencies. Typically, the BUC module requires an external 10 MHz system synchronization source to up-convert input RF modulations to the desired output frequencies without compromising signal integrity. Most HPAs are constructed within a self-contained housing to protect internal components from any outdoor environment, and to allow operation up to 10,000 feet above sea level (much higher for airborne applications). Internal thermal management systems maintain the desired internal temperature for the TWT and the HVPS, spanning -40°C to +55°C. 7 TWT Performance Fundamentals Traveling wave tubes remain the best source for efficient generation of microwave power over broad frequency bandwidths. When compared to solid state technology, today's metal-ceramic traveling wave tube amplifiers combine low acquisition price with affordable maintenance and support. TWTA systems are smaller, lighter, and much more efficient than their SSA counterparts. TWT amplifiers do behave somewhat differently than SSAs. Following is a discussion of some of the more important TWT performance features and design attributes. Power and Bandwidth TWT power output is determined by the efficiency with which energy in the electron beam is converted to microwave energy (sometimes called "interaction efficiency" or "beam efficiency"). ܲ௨௧ ൌ ܫ ܸ ߟ௧௧ Current emitted from a thermionic cathode obeys a 3/2 power law with respect to applied voltage ୠୣୟ୫ ൌ ଷȀଶ ୠୣୟ୫ where the constant K is called perveance. Perveance is an important design parameter since it is totally determined by electron gun dimensions. Using this expression, power output often is given by ୭୳୲ ൌ ହȀଶ ୠୣୟ୫ ߟ௧௧ CW (continuous wave) TWTs generally use electron guns which operate in the 0.2 to 1.0 x 10-6 perveance range while pulse TWTs push the limits imposed by practical electron gun design and magnetic focusing materials which is not much greater than 2.0 x 10-6. Interaction efficiency is determined by beam size, the uniformity of beam electron trajectories (often called beam laminarity), and helix circuit parameters such as helix and backwall diameter, helix pitch, dielectric support material and shape, helix loss, etc. It varies with frequency because the interaction of helix parameters in a given circuit change as frequency is varied. For example, backwall diameter predominantly affects low band edge performance while the shape of the dielectric rods predominantly affect the high band edge. Practical helix designs have band center interaction efficiencies which range from 10% to 25% and band edge to center efficiency variations of 50% or more. Practical bandwidths range from hundreds of MHz to double octave (Fhi = 4 Flo). Teledyne specifies "rated output power" which typically is several tenths of a dB or more below saturation. Efficiency As the beam gives up energy to the amplified signal, it slows down. By tapering or stepping helix pitch to maintain synchronism between the RF wave and the slowing beam, interaction efficiency often can be enhanced. Determining a satisfactory pitch configuration that works well over the entire frequency band and which preserves other important performance parameters requires computer simulation of the non-linear beam-helix interaction and involves numerous compromises which often trade one desirable effect for another. A second means of enhancing TWT efficiency is to depress the beam collector voltage(s) below ground so that unused energy can be recovered from the spent electron beam. The power consumed by a TWT with n stages of collector depression is calculated as follows where collector voltages are referenced to cathode: ܲ ൌ ܸ௧ ܫ௧ ܸ ܫ௫ ܸ௧ ܫ௧ Ʉ௩ ܲ ൌ ௨௧൘ܲ 8 Since both output power and prime power vary with signal frequency, RF input drive, etc., it is best to state the maximum allowable prime power consumption rather than efficiency when specifying a TWT. Waste heat dissipation is given by ܲௗ௦௦ ൌ ܲ െ ܲ௨௧ The electro optics of a multi-stage depressed collector are quite complicated and depend not only on the geometry and relative voltages of the collector segments but also upon the degree of RF modulation, the magnetic field used to focus the beam, the yield of secondary electrons at the collecting surfaces, etc. The higher the interaction efficiency, the greater the difficulty in collecting the spent beam since strong RF modulation causes the electron velocity distribution to spread. In wide band TWTs, the low band edge harmonic interaction causes a similar effect. Pulse TWTs with high interaction efficiency often cannot practically utilize more than a single stage collector while CW TWTs with lower interaction efficiency successfully utilize two or three stages. In a TWT having a well designed multi-stage depressed collector, the waste heat dissipated by the TWT is nearly constant as RF input drive is varied. expansion near the high band edge (AM / AM > 1.0). This is caused by the inability of the helix velocity tapers to equally match beam slow-down at all frequencies within the band. It generally is undesirable to operate the TWT too far into overdrive as severe beam defocusing can occur in this region. Gain variations over the frequency band result from the frequency dependence of helix velocity and impedance. Additionally, gain varies with the electrical length of the circuit, which, in turn, varies with frequency. A two octave TWT can exhibit as much as 25 dB gain variation. This typically can be reduced to ±2.0 dB with the use of an external gain equalizer. Gain ripple results from signal reflections either internal or external to the tube. Since a TWT is electrically "long" (a typical TWT has a phase length of about 10,000 degrees), a relatively small change in frequency (typically 100 to 300 Mhz) shifts phase 360°. Most TWTs exhibit an approximate ±0.2 dB gain ripple at this frequency. Gain The dynamic range of a TWT is the region between the point at which the RF output signal just breaks through the noise threshold to the point at which the output power saturates. The linear or small signal region is most often defined as ending when increasing RF drive causes gain to drop 1 dB from its small signal level (1 dB compression point). Saturation generally occurs at an input drive level 6 to 8 dB above the 1 dB compression point and with 2 to 3 dB higher output power. AM / AM conversion is a measure of the change in RF output power that results from a change in the RF input drive, i.e. the slope of the transfer curve. In the linear region, AM / AM conversion is 1.0 dB / dB. At saturation, AM / AM conversion is 0 dB / dB. TWTs with high interaction efficiency often exhibit gain 9 Phase Any factor which affects the velocity of the electron beam produces phase changes in the RF output signal. As the RF drive level is increased into the non-linear region, the phase length of the tube increases as beam velocity is slowed by transfer of energy to the RF wave. This effect, called AM / PM conversion, is relatively insensitive to RF drive in the linear region. As the TWT is driven toward saturation, the rate of phase change increases. The peak value of AM / PM generally occurs at or several dB below saturation and is frequency dependent (typically increasing with increasing frequency for a given helix design). If the factor that changes beam velocity varies with time, the result is phase modulation of the RF output signal. The primary factor affecting the velocity of the beam is the cathode voltage. Other voltages or external affects (such as voltages induced by placement of a blower motor too close to the tube) have secondary affects. Typical phase pushing values for TWTs are: • 100° / 1% change in Cathode Voltage • 10° / 1% change in Grid "on" Voltage • 0.0005° / 1% change in Collector Voltage These numbers are approximate. The actual values of phase pushing for any specific TWT are determined by gun perveance, gain, efficiency, etc. Any periodic voltage modulation produces signal side bands, separated from the main signal by the modulation frequency. The depression below carrier of these spurious signals (į in dB) for sinusoidal ripple can roughly be approximated by the following expression: L = TWT pin-to-pin length (in) F = RF Signal Frequency (GHz) v = peak-to-peak Cathode ripple (Volts) V = Cathode Voltage (Volts) § 1.13 × 103 × L2 × F 2 × v 2 · ¸¸ V3 © ¹ δ = 10 Log ¨¨ A ±0.5 volt sinusoidal ripple on a 10 kV TWT with 10" input-tooutput length produces -49.5 dBc sidebands at 10 GHz. Peak-topeak phase ripple (¨ij in degrees) is directly related to small signal gain ripple (dG -- peak-to-peak in dB) by the following expression: ( ) Δϕ ≅ 57.3 10dG 20 − 1 A small signal gain ripple of ±0.2 dB produces phase ripple of ±1.35°. Time delay is the total time it takes for a signal to pass through the tube (typically 3 to 5 nsec) and is the derivative of phase delay. Thus, the same mechanisms that cause phase nonlinearity are responsible for time delay distortion. The maximum rate of change of time delay (¨Ȗ in nsec / MHz) due to gain and phase ripple is calculated by: Δγ ≅ π × (10dG 20 ) − 1 dF 2 × 1018 10 where dF is the frequency periodicity of the small signal gain ripple (in Hz). A 200 Mhz gain ripple with ±0.2 dB amplitude causes 3.7 psec / MHz time delay distortion. Power Combining With the tube-to-tube performance consistency that is achieved with modern TWT manufacturing technology, power combining is a practical and relatively inexpensive means of achieving high power levels. Typical tracking of a TWT to a phase standard over an octave or greater frequency band when the absolute phase difference between the tubes is zeroed with an input phase shifter is ±20° (40° maximum imbalance between any two randomly selected tubes). When combined in a standard 4-port hybrid junction, such as a waveguide Magic Tee, the resultant combined power in Watts of two tubes with output powers P1 and P2 due to phase (ij) and amplitude imbalance at the input ports is: 1 + 2 X cos ϕ + X 2 ½ Pcombined = (P1 + P 2 ) × ® ¾ 2 + 2X 2 ¿ ¯ 12 § P2 · X =¨ ¸ © P1 ¹ for P 2 ≤ P1 Ignoring combining losses (which are on the order of tenths of dB), two 300W TWTs with equal power output and 40° maximum phase imbalance combine to produce 530W (0.54 dB phase imbalance loss). If it were desired to combine a 400W TWT with a 200W TWT with the same maximum phase imbalance, the result would be 517W (0.65 dB phase and amplitude imbalance loss). Because of the relative insensitivity to amplitude imbalance, odd numbers of TWTs combine reasonably well. Power combining neither reduces the amplifier's tolerance to output mismatch nor its modulation fidelity. With the use of 180° hybrids, harmonic content can be reduced by at least 10 dB relative to the tube's stand-alone performance since in this case, harmonic is directed to the "lost-power" rather than to the "combined-power" port of the hybrid. Likewise, since TWT noise output is non-coherent and thus splits evenly between the two output ports of the hybrid, noise is reduced 3 dB per combination. Harmonics Due to the wide bandwidth and high gain of the TWT, harmonics of the fundamental RF drive signal will appear in the output spectrum as the tube is driven into the non-linear region. Single octave TWTs typically have 3 dB or more low band edge harmonic separation while dual octave TWTs may exhibit harmonics equal to or greater than the fundamental. Higher harmonics also will be present, but to a lesser degree. Broadband TWTs may react to harmonics in the RF drive which, if sufficiently strong, can either enhance or degrade output power depending upon the relative phase angle between the harmonic and fundamental input signals. Noise Noise in the output spectrum of a TWT results from the fact that electron emission from the cathode is a random process. Furthermore, the velocities of electrons emitted by the hot cathode have a Maxwellian distribution. TWT noise figure (in dB) is given by the following expression: NF = 114 + NPO - 10 Log(BW) - Gss -114 dBm/Mhz is the reference thermal noise caused by a room temperature termination at the TWT input. BW is the bandwidth relative to 1 Mhz over which the noise power output (NPO in dBm) is measured. Gss is the small signal gain in dB averaged over the bandwidth BW. Typical noise figures for medium power TWTs are 25 to 35 dB. Noise can be reduced by gating off the beam when signal transmission is not required either with a grid or focus electrode (FE). A grid cuts off noise to the thermal level. A focus electrode typically cuts gain to zero dB which generally results in noise output 25 to 35 dB above thermal. Most Teledyne CW TWTs are offered in both gridded and focus electrode gated versions. With modern design and fabrication techniques, the reliability of shadow grid versions is equal to or greater than their FE counterparts. 11 Spurious outputs not correlated to the fundamental signal frequency are minimized by oscillation suppression techniques such as special helix attenuation patterns and pitch changes. Operation of the TWT into highly mismatched loads may increase spurious output since these suppression techniques are sometimes less effective in the presence of strong reflected signals. Intermodulation Distortion When the RF input signal contains two or more discrete carrier frequencies, a mixing process occurs which results in intermodulation products displaced from the carriers at multiples of the difference frequencies. The power levels of these intermodulation products are dependent upon the relative power levels of the carriers and the linearity of the TWT. The two-tone third order intermodulation products (at 2F1 - F2 and 2F2 - F1) are the most important because they are closest to the signal frequencies and largest in amplitude. At saturation, the separation of IM products from the fundamental is typically 10 dB. The amplitude of these products decrease 2 dB for every dB the power is backed down from saturation. modulation, the amplitude of the signal is theoretically constant. However, in the frequency domain, the signal occupies a relatively wide bandwidth. When a QPSK signal is filtered to limit its bandwidth, the sidebands furthest from the carrier are removed. The result is that in the time domain, the signal is no longer constant in amplitude, and AM / AM and AM / PM processes within the amplifier generate new sidebands. Typically, these "regrowth skirts" are separated 8 dB further from carrier than the two-tone IM3 products that would result with the same average carrier power, i.e., -18 dBc IM3 (4 dB back-off) roughly corresponds to -26 dBc spectral regrowth. Use of a predistortion linearizer with the TWT can allow comparable operation to within 2 dB of saturation. PIM3 ؆ 2 × Back-off + 10 dB The third order intercept point OIP3 is a figure of merit and is equal to the output power of each of the two tones when the third order IM separation is 0 dBc. Obviously, the TWT saturates before this point is reached but it can be calculated by projecting the single carrier and IM3 linear gain slopes to their intersection. The separation in dB of the intermod from carrier (at power Po) is more accurately given by: PIM3 = 2 (OIP3 - Po) An effect related to IM distortion is spectral regrowth. The name comes from the observation that band limited signals, after passing through a non-linear amplifier, often have components outside of the original band that the signal occupied at the input. This phenomenon is often encountered with a digitally modulated carrier. For example, with Quadrature Phase-Shift Keying (QPSK) 12 TWTs traditionally have been used for FM applications where they're operated to saturation and are typically so specified. SSAs, on the other hand, traditionally have been specified at their one dB compression point. As a result, the two cannot be compared at a given output back-off level. When specifying a power requirement it is best to specify the absolute output power required for a given level of IM3 distortion, spectral regrowth, or the OIP3. At this point, a SSA will operate closer to saturation but will not have the approximate 3 dB reserve "burn-through" capability of a TWT. TWT Reliability If a large number of TWTs were simultaneously put into service, their survival rate history would be characterized by three distinct periods: • Infant Mortality • Random Failures • Wear-out Infant mortality failures due to workmanship defects are effectively screened-out by “burn-in” before delivery. Random failures during the long middle period are characterized by the time constant MTBF (Mean Time Before Failure) which is a measure of the time to which about 37% (e-1) of the tubes will have survived. Cathode exhaustion triggers the point at which tubes wear-out and failure rates increase substantially. MTBF and life clearly are two different measures of a tubes history. Ideally, MTBF exceeds life by a substantial amount. In some cases, cathode life may be so long or the environment may be so severe that random failures account for the majority of tube removals. The best currently available measure of TWT MTBF is MIL-HDBK-217F Notice 21 which provides the following estimates: ݁ݐ݅ܵ݀݁ݔ݅ܨ݀݁݊݅ݐ݅݀݊ܥݎ݅ܣ ܨܤܶܯൌ ͳͲ ͷǤͷݔሺͳǤͲͲͲͲͳሻ ݔሺͳǤͳሻி ݎ݅ܣ݀݁݊݅ݐܷ݄݅݀݊ܿ݊ݐ݅ݓ݁ݐ݅ܵ݀݁ݔ݅ܨ ܨܤܶܯൌ ݈ܾ݁݅ܯ݀݊ݑݎܩ ܨܤܶܯൌ ͳͲ ͳǤͷݔሺͳǤͲͲͲͲͳሻ ݔሺͳǤͳሻி ͳͲ ǤͲݔሺͳǤͲͲͲͲͳሻ ݔሺͳǤͳሻி Where P is the rated power in Watts (peak if pulsed) and F is the operating Frequency in GHz (the geometric mean of the end points is used if the operating frequency ranges over a band). As an example, the 250W 0.8 to 2.0 GHz M5670NO is predicted by this model to have MTBFs of 158,494 hrs for Air Conditioned sites, 52,831 hrs for unconditioned sites, and 11,321 hrs for ground mobile operation. This model is very simplistic and does not address failure drivers such as thermal and voltage stress gradients within the TWT, system VSWR, heater on – off cycling, power supply energy discharge during fault conditions, etc. Despite these concerns, experience with modern TWTs used on switching power supplies indicates that the MIL-HDBK typically under predicts MTBF by a factor of 22. A Safety and Set-up instruction booklet is provided with each Teledyne TWT. It contains good advice on set-up procedures to prevent infant mortality problems. The high voltage power supply should be designed to limit energy dissipation to substantially less than 10J with at least several ohms of series resistance in the TWT cathode connection. The tube also should be provided with adequate cooling so that temperatures are maintained within the recommended ranges under all operating conditions. Unlike SSAs, however, TWTs can operate for short periods at chill plate temperatures above their recommended level. TWTs are equipped with thermal interlocks to prevent permanent damage. Any TWT in this catalog can be special ordered for prolonged operation at temperatures reasonably beyond the recommended limits. 13 TWT Life Modern TWTs are designed with low temperature cathodes capable of at least 20,000 hours of continuous operation. Many Teledyne TWTs have accumulated three to five times this life. A key to achieving long cathode life is to maintain heater voltage within it’s recommended range. If the tube is to spend a substantial portion of its’ life in standby, cathode life can be extended by reducing heater voltage 10% during standby. The majority of Teledyne TWTs employ shadow grids to turn the electron beam on and off. For most applications the life and reliability of shadow grid versions is equal to or greater than their ungridded counterparts. However, for those situations where the TWT is expected to be turned on and off infrequently and to operate uninterrupted for thousands of hours, ungridded versions will offer maximum life. The current generation of TWTs is amassing an excellent reliability record. This is being illustrated by experience in Space where the failure rate of TWTs on Intelsat satellites has been 15% lower than for SSAs. ____________ 1 Military Handbook, Reliability Prediction of Electronic Equipment, MILHDBK-217F Notice 2, 28 February, 1995 2 A. S. Gilmour, Jr., Principles of Traveling Wave Tubes, Artech House, Inc., See especially p. 523 Current process and fabrication technologies have eliminated the need to periodically "refresh" tube vacuum during prolonged storage. If there is concern about turning-on a tube after storage, an extended heater warm-up of from 8 to 24 hours prior to the application of cathode voltage should be adequate. The primary enemies of TWTs are foreign material in HV and RF connectors and corrosion-causing moisture. Keeping stored tubes clean and dry is the best means of insuring high vacuum integrity and long life. 14 dBm to Watts Conversion Table dBm Watts dBm Watts dBm Watts dBm Watts dBm Watts dBm Watts dBm Watts 30.0 30.2 30.4 30.6 30.8 31.0 31.2 31.4 31.6 31.8 32.0 32.2 32.4 32.6 32.8 33.0 33.2 33.4 33.6 33.8 34.0 34.2 34.4 34.6 34.8 35.0 35.2 35.4 35.6 35.8 36.0 36.2 36.4 36.6 36.8 37.0 37.2 37.4 37.6 37.8 38.0 38.2 38.4 1.00 1.05 1.10 1.15 1.20 1.26 1.32 1.38 1.45 1.51 1.58 1.66 1.74 1.82 1.91 2.00 2.09 2.19 2.29 2.40 2.51 2.63 2.75 2.88 3.02 3.16 3.31 3.47 3.63 3.80 3.98 4.17 4.37 4.57 4.79 5.01 5.25 5.50 5.75 6.03 6.31 6.61 6.92 38.6 38.8 39.0 39.2 39.4 39.6 39.8 40.0 40.2 40.4 40.6 40.8 41.0 41.2 41.4 41.6 41.8 42.0 42.2 42.4 42.6 42.8 43.0 43.2 43.4 43.6 43.8 44.0 44.2 44.4 44.6 44.8 45.0 45.2 45.4 45.6 45.8 46.0 46.2 46.4 46.6 46.8 47.0 7.24 7.59 7.94 8.32 8.71 9.12 9.55 10.00 10.50 11.00 11.50 12.00 12.60 13.20 13.80 14.50 15.10 15.80 16.60 17.40 18.20 19.10 20.00 20.90 21.90 22.90 24.00 25.10 26.30 27.50 28.80 30.20 31.60 33.10 34.70 36.30 38.00 39.80 41.70 43.70 45.70 47.90 51.10 47.2 47.4 47.6 47.8 48.0 48.2 48.4 48.6 48.8 49.0 49.2 49.4 49.6 49.8 50.0 50.1 50.2 50.3 50.4 50.5 50.6 50.7 50.8 50.9 51.0 51.1 51.2 51.3 51.4 51.5 51.6 51.7 51.8 51.9 52.0 52.1 52.2 52.3 52.4 52.5 52.6 52.7 52.8 52.50 55.00 57.50 60.30 63.10 66.10 69.20 72.40 75.90 79.40 83.20 87.10 91.20 95.50 100.00 102.00 105.00 107.00 110.00 112.00 115.00 117.00 120.00 123.00 126.00 129.00 132.00 135.00 138.00 141.00 145.00 148.00 151.00 155.00 158.00 162.00 166.00 170.00 174.00 178.00 182.00 186.00 191.00 52.9 53.0 53.1 53.2 53.3 53.4 53.5 53.6 53.7 53.8 53.9 54.0 54.1 54.2 54.3 54.4 54.5 54.6 54.7 54.8 54.9 55.0 55.1 55.2 55.3 55.4 55.5 55.6 55.7 55.8 55.9 56.0 56.1 56.2 56.3 56.4 56.5 56.6 56.7 56.8 56.9 57.0 57.1 195.00 200.00 204.00 209.00 214.00 219.00 224.00 229.00 234.00 240.00 245.00 251.00 257.00 263.00 269.00 275.00 282.00 288.00 295.00 302.00 309.00 316.00 324.00 331.00 339.00 347.00 355.00 363.00 372.00 380.00 389.00 398.00 407.00 417.00 427.00 437.00 447.00 457.00 468.00 479.00 490.00 501.00 513.00 57.2 57.3 57.4 57.5 57.6 57.7 57.8 57.9 58.0 58.1 58.2 58.3 58.4 58.5 58.6 58.7 58.8 58.9 59.0 59.1 59.2 59.3 59.4 59.5 59.6 59.7 59.8 59.9 60.0 60.1 60.2 60.3 60.4 60.5 60.6 60.7 60.8 60.9 61.0 61.1 61.2 61.3 61.4 525.00 537.00 550.00 562.00 575.00 589.00 603.00 617.00 631.00 646.00 661.00 676.00 692.00 708.00 724.00 741.00 759.00 776.00 794.00 813.00 832.00 851.00 871.00 891.00 912.00 933.00 955.00 977.00 1000.00 1020.00 1050.00 1070.00 1100.00 1120.00 1150.00 1170.00 1200.00 1230.00 1260.00 1290.00 1320.00 1350.00 1380.00 61.5 61.6 61.7 61.8 61.9 62.0 62.1 62.2 62.3 62.4 62.5 62.6 62.7 62.8 62.9 63.0 63.1 63.2 63.3 63.4 63.5 63.6 63.7 63.8 63.9 64.0 64.1 64.2 64.3 64.4 64.5 64.6 64.7 64.8 64.9 65.0 65.1 65.2 65.3 65.4 65.5 65.6 65.7 1410.00 1450.00 1480.00 1510.00 1550.00 1580.00 1620.00 1660.00 1700.00 1740.00 1780.00 1820.00 1860.00 1910.00 1950.00 2000.00 2040.00 2090.00 2140.00 2190.00 2240.00 2290.00 2340.00 2400.00 2450.00 2510.00 2570.00 2630.00 2690.00 2750.00 2820.00 2880.00 2960.00 3020.00 3090.00 3160.00 3240.00 3310.00 3390.00 3470.00 3550.00 3630.00 3720.00 65.8 65.9 66.0 66.1 66.2 66.3 66.4 66.5 66.6 66.7 66.8 66.9 67.0 67.1 67.2 67.3 67.4 67.5 67.6 67.7 67.8 67.9 68.0 68.1 68.2 68.3 68.4 68.5 68.6 68.7 68.8 68.9 69.0 69.1 69.2 69.3 69.4 69.5 69.6 69.7 69.8 69.9 70.0 3800.00 3890.00 3980.00 4070.00 4170.00 4270.00 4370.00 4470.00 4570.00 4680.00 4790.00 4900.00 5010.00 5130.00 5250.00 5370.00 5500.00 5620.00 5750.00 5890.00 6030.00 6170.00 6310.00 6460.00 6610.00 6760.00 6920.00 7080.00 7240.00 7410.00 7590.00 7760.00 7940.00 8130.00 8320.00 8510.00 8710.00 8910.00 9120.00 9330.00 9650.00 9770.00 10000.00 Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15 RECTANGULAR WAVEGUIDE SPECIFICATIONS EIA WG Designation Recommended Operating Range for TE1,0 Mode Range In ࣅ ࣅ Cut-Off for TE1,0 Mode Range In ࣅ ࣅ Frequency (GHz-Sec) Wavelength (cm) Frequency (GHz-Sec) Wavelength (cm) WR137 5.85-8.20 5.12-3.66 4.285 6.996 1.47-1.05 1.48-1.17 WR102 7.00-11.00 4.28-2.72 5.786 5.182 1.65-1.05 1.78-1.18 WR112 7.05-10.00 4.25-2.99 5.260 5.700 1.49-1.05 1.51-1.17 Recommended Power Rating (At One Atmosphere) cw(KW) WR90 R/H 8.20-12.40 3.66-2.42 6.560 4.572 1.60-1.06 1.68-1.18 WR90 8.20-12.40 3.66-2.42 6.560 4.572 1.60-1.06 1.68-1.18 WR75 R/H 10.00-15.00 2.99-2.00 7.847 3.820 1.57-1.05 1.64-1.17 WR75 10.00-15.00 2.99-2.00 7.847 3.820 1.57-1.05 1.64-1.17 WR62 12.40-18.00 2.42-1.66 9.490 3.160 1.53-1.05 1.55-1.18 WR28 26.50-40.00 1.13-.75 21.10 1.422 1.59-1.05 1.65-1.17 10.0 8.0 5.0 4.0 6.0 4.8 2 3.0 2.4 1.8 2.8 2.2 1.8 1.4 0.5 0.4 peak(KW) Theoretical Attenuation lowest to highest frequency (dB/100 ft.) DIMENSIONS (Inches) 1.987-1.562 2.955-2.348 3.516-2.217 5.285-3.333 2.776-2.154 4.173-3.238 10.47-9.254 4.238-2.995 6.506-4.502 7.806-5.950 5.121-3.577 7.698-5.377 6.451-4.743 9.700-7.131 23.02-15.77 34.46-23.59 1980 1020 1280 340 760 280 620 460 100 Wall Thickness Nominal Inside Tol. ± Outside Tol. ± 1.372 x .622 0.004 1.500 x .750 .004 .064 1.020 x .510 0.005 1.148 x .638 .005 .064 1.122 x .497 0.004 1.250 x .625 .004 .064 .900 x .200 0.003 1.000 x .300 .003 .050 .900 x .400 0.003 1.000 x .500 .003 .050 .750 x .200 0.003 .850 x .300 .003 .050 .750 x .375 0.003 .850 x .475 .003 .050 .622 x .311 0.002 .702 x .391 .003 .040 .280 x .140 0.001 .360 x .220 .002 .040 DOUBLE RIDGE WAVEGUIDE SPECIFICATIONS Waveguide Size MIL-W-23351 Dash No. WRD 475D24 4-033 4-034 4-035 4-036 WRD 580D28 WRD 650D28 WRD 750D24 WRD 180C24 WRD 584 4-037 4-038 4-039 4-040 4-045 4-046 4-047 4-048 Material Aluminum Alloy Brass Copper Silver Alloy Aluminum Alloy Brass Copper Silver Alloy Aluminum Alloy Brass Copper Silver Alloy Aluminum Alloy Brass Copper Silver Alloy Aluminum Alloy Brass Copper Silver Alloy Aluminum Recommended Frequency Range TE1.0 Mode (GHz) (3) Cut-Off Frequency for TE1.0 Mode (GHz) 4.75 - 11.0 3.961 5.80 - 16.00 4.892 6.50 - 18.00 5.348 7.50 - 18.00 6.239 18.00 - 40.00 14.995 5.80 - 18.40 4.467 (1) ࡲ ൌ ξࡲࢉǤ Theoretical Attenuation Decibels/Foot 0.0487 0.0481 0.0324 0.0347 0.100 0.098 0.067 0.070 0.106 0.105 0.070 0.076 0.0964 0.0951 0.0641 0.0686 0.358 0.353 0.238 0.255 0.188 (2) Recommended Power Rating (at One Atmosphere) cw (KW) peak (KW) DIMENSIONS (Inches) A B C D E F R1 R2 8.0 85 1.090 0.506 1.190 0.606 0.272 0.215 0.043 0.030 5.2 32 0.780 0.370 0.880 0.470 0.200 0.120 0.043 0.015 4.0 25 0.721 0.321 0.821 0.421 0.173 0.101 0.022 0.020 4.8 35 0.691 0.321 0.791 0.421 0.173 0.136 0.027 0.020 0.8 5 0.288 0.134 0.368 0.214 0.072 0.057 0.011 0.015 4 30 0.720 0.310 0.925 0.510 0.180 0.064 0.043 0.015 Courtesy of Continental Microwave & Tool Company, Inc. and Microwave Development Co. (MDC) Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 16 Continuous Wave TWTs Page No. 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 Model Frequency (GHz) Power (W) Duty (%) Max. Typical Gain (dB) Min/Max @ Rated Pout Efficiency (%) Typical Modulation (Control Electrode) Output Connection Weight (lbs/kg) (NTE) M5670NO MEC 5670 MTD 5119 MEC 5119 MEC 5203 MTE 5107 MEC 5500E MEC 5208 MEC 5196 MTG 5082H MEC 5296 MEC 5498 MEC 5497 M5889NO MEC 5889 MTG 5130 MEC 5413 MEC 5414 MEC 5423 MEC 5424 MEC 5415 MEC 5416 MEC 5508 MEC 5409 MEC 5410 MEC 5421 MEC 5422 MEC 5411 MEC 5412 MEC 5405 MEC 5406 MEC 5419 MEC 5420 MEC 5407 MEC 5408 MEC 5487 MEC 5519 MEC 5493 MEC 5493E MEC 5496 0.8 - 2.0 0.8 - 2.0 0.8 - 2.8 0.8 - 2.8 1.0 - 2.5 2.0 - 4.0 2.0 - 6.5 2.0 - 8.0 2.0 - 8.0 2.5 - 8.0 2.5 - 7.5 2.5 - 7.5 2.5 - 7.5 4.0 - 8.0 4.0 - 8.0 5.0 - 11.0 6.0 - 18.0 6.0 - 18.0 6.0 - 18.0 6.0 - 18.0 6.0 - 18.0 6.0 - 18.0 6.0 - 18.0 6.5 - 18.0 6.5 - 18.0 6.5 - 18.0 6.5 - 18.0 6.5 - 18.0 6.5 - 18.0 7.5 - 18.0 7.5 - 18.0 7.5 - 18.0 7.5 - 18.0 7.5 - 18.0 7.5 - 18.0 8.0 - 18.0 11.0 - 18.0 18.0 - 26.5 18.0 - 26.5 26.5 - 40.0 250* 250* 250* 250* 500 250 400* 250* 450* 275 535 535 630* 250 250 500* 200 200 250 250 300 300 200* 200 200 250 250 300 300 200 200 250 250 300 300 325 500* 50 50 40 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 24/36 24/36 32/47 32/47 24/35 44/53 34/38 37/62 26/46 40/64 31/43 26/43 31/43 46/59 46/59 40/57 35/46 35/46 35/46 35/46 35/46 35/46 26/28 35/48 35/48 35/45 35/45 35/45 35/45 35/55 35/55 35/55 35/55 35/55 35/55 44/47 53/55 26/28 26/28 35/50 17* 17* 20* 20* 22* 22 35* 19* 26* 23 28 28 37 21 21 21 20 20 23 23 26 26 28 20 20 24 24 25 25 22 22 25 25 29 29 32 28 20* 20* 20* N/A GRID N/A GRID GRID N/A GRID GRID GRID GRID GRID GRID GRID N/A GRID FE GRID FE GRID FE GRID FE FE GRID FE GRID FE GRID FE GRID FE GRID FE GRID FE GRID FE FE FE FE N N N N SC N SC SC SC SC SC WRD 250 SC N N WRD 475 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 650 WRD 750 WRD 750 WRD 750 WRD 750 WRD 750 WRD 750 WRD 750 WRD 750 WRD 180 WR 42 WRD 180 10/4.5 10/4.5 10/4.5 10/4.5 15/6.8 8/3.6 8.3/3.8 8.0/3.6 9/4.1 8/3.6 9/4.1 9.5/4.32 9/4.1 9/4.1 9/4.1 8/3.6 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 3/1.36 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 9/4.1 7/3.2 7/3.2 7.5/3.4 * Over majority of frequency range - Performance may be reduced at band edges. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 17 M5670NO/MEC 5670 Continuous Wave TWT 0.8 GHz – 2.0 GHz RF Performance • • • • • 200 W Minimum Power 0.8 to 2.0 GHz -40° to 85° C 1500 W Typ. Prime Power 24-36 dB Typical Gain • 23.9” L x 3” W x 2.95” H (62 x 7.65 x 7.5 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Anode Grid On Grid Off Cathode (Ek) Collector w/RF Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 0.8 230 200* 24 0.9 285 250 27 1.0 330 250** 31 1.2 320 250 34 1.4 300 250 36 1.6 300 250 35 1.8 295 250 33 2.0 280 250 29 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 3.4 A -5.2 Vdc 4.5 A Performance Ground Ground 140 Vdc 110 Vdc -200 Vdc -3.75 kV 3.2 kV 30 mA 4 mA 0.4 mA 0.5 mA 0.1 mA 450 mA 420 mA Ground Ground Ground Ground 0 500 Vdc 100 Vdc 250 Vdc -200 Vdc -500 Vdc -3 kV -4 kV 87% x Ek ±2% 80 mA 80 mA 4 mA 10 mA 1 mA 550 mA 550 mA Input VSWR .......................................1.7:1 .................... 2.5:1 Output VSWR ....................................1.6:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 50 pF ................... 65 pF Min. Harmonic Separation ............. -4/-7 dBc ...... -2*/-3** dBc Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power ................................... 1500 W .............. 1700 W -6.6 Vdc Typical Spec Cathode and Anode voltages are measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Anode voltage not required with Grid modulated version. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 18 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 0.8 GHz – 2.0 GHz Continuous Wave TWT භ M5670NO/MEC 5670 19 MTD 5119/MEC 5119 Continuous Wave TWT 0.8 GHz – 2.8 GHz RF Performance • • • • • 200 W Minimum Power 0.8 to 2.8 GHz -40° to 85° C 1560 W Typ. Prime Power 32-47 dB Typical Gain • 27” L x 3” W x 2.95” H (68.4 x 7.65 x 7.5 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Anode Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 3.4 A -5.2 Vdc 4.5 A Ground Ground 250 Vdc 120 Vdc -250 Vdc -3.75 kV 3.2 kV 40 mA 4 mA 1.5 mA 0.5 mA 0.1 mA 480 mA 440 mA Ground Ground Ground Ground 0 500 Vdc 100 Vdc 250 Vdc -200 Vdc -500 Vdc -3 kV -4 kV 87% x Ek ±2% Cathode and Anode voltages are measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Anode voltage not required with Grid modulated version. -6.5 Vdc 80 mA 80 mA 4 mA 10 mA 1 mA 550 mA 550 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 210 355 390 355 315 325 325 315 315 325 335 335 200 250 250 250 250 250 250 250 250 250 250 250 33 35 43 46 47 47 47 45 42 39 35 32 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. ±4 dB gain equalizer available. Performance Typical Spec Input VSWR .......................................1.6:1 .................... 2.5:1 Output VSWR ....................................1.6:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 50 pF ................... 65 pF Min. Harmonic Separation ............ -3.5/-8 dBc ......... -2/-3 dBc Noise Power Density (dBm/MHz) ...................................... -25 ......................... -20 Prime Power ................................... 1560 W .............. 1700 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 20 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 0.8 GHz – 2.8 GHz Continuous Wave TWT භ MTD 5119/MEC 5119 21 MEC 5203 Continuous Wave TWT 1 GHz – 2.5 GHz RF Performance • • • • • 500 W Minimum Power 1.0 to 2.5 GHz -40° to 85° C 2000 W Typ. Prime Power 24-35 dB Typical Gain • 24.4” L x 4” W x 4.5” H (62 x 10.2 x 11.4 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 3.5 A -5.2 Vdc -6.6 Vdc 4.5 A Ground Ground 150 Vdc -200 Vdc -4.80 kV 75 mA 5 mA 1 mA 0.1 mA 578 mA Ground Ground 100 Vdc -200 Vdc -4.5 kV Ground Ground 250Vdc -500 Vdc -5.2 kV 100 mA 100 mA 10 mA 1 mA 650 mA 3.71 kV 1.65 kV 312 mA 191 mA 79% x Ek ±2% 35% x Ek ±2% 450 mA 650 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 1.0 515 500 24 1.2 600 500 30 1.4 625 500 32 1.6 670 500 34 1.8 650 500 35 2.0 550 500 33 2.2 540 500 31 2.4 535 500 29 2.5 525 500 28 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. ±4 dB gain equalizer available. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 ...................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 45 pF ................... 60 pF Min. Harmonic Separation ............... -2 dBc ................. -1 dBc Noise Power Density (dBm/MHz) ...................................... -35 ......................... -30 Prime Power ................................... 2000 W .............. 3000 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 22 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 1 GHz – 2.5 GHz Continuous Wave TWT භ MEC 5203 23 MTE 5107 Continuous Wave TWT 2.0 GHz – 4.0 GHz RF Performance • • • • • 250 W Minimum Power 2.0 to 4.0 GHz -40° to 85° C 1300 W Typ. Prime Power 44-53 dB Typical Gain • 21” L x 2.5” W x 2” H (53.3 x 6.4 x 5.2 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Anode Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6 Vdc 3A Ground Ground 210 Vdc -4.4 kV 3.08 kV 33 mA 3 mA 0.7 mA 410 mA 375 mA Ground Ground 0 -4.1 kV Cathode and Anode voltages are measured with respect to ground. Heater and Collector voltages are measured with respect to Cathode. -6.6 Vdc Ground Ground 500 Vdc -4.6 kV 70% x Ek ±2% 45 mA 45 mA 4 mA 450 mA 450 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.00 250 250* 44 2.25 295 250 48 2.50 320 250 51 2.75 330 250 52 3.00 345 250 53 3.25 360 250 53 3.50 360 250 52 3.75 355 250 51 4.00 345 250 49 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.9:1 .................... 2.5:1 Output VSWR ....................................1.7:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW Min. Harmonic Separation ............... -5 dBc ............... -4 dBc* Noise Power Density (dBm/MHz) ...................................... -30 ......................... -10 Prime Power ................................... 1300 W .............. 1500 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 24 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.0 GHz – 4.0 GHz Continuous Wave TWT භ MTE 5107 25 MEC 5500E Continuous Wave TWT 2 GHz – 6.5 GHz RF Performance • 400 W Minimum Power (325 W @ 6.5 GHz) • 2.0 to 6.5 GHz • -20° to 85° C • 1200 W Typ. Prime Power • 34 to 39 dB Typical Gain • 17.51” L x 3.60” W x 3.45” H (44.5 x 9.14 x 8.76 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6.1 Vdc -6.6 Vdc 2.5 A Ground Ground 180 Vdc -250 Vdc -4.9 kV 36 mA 4 mA 0.5 mA 0.1 mA 375 mA Ground Ground 100 Vdc -200 Vdc -4.6 kV Ground Ground 250 Vdc -500 Vdc -5.4 kV 50 mA 50 mA 10 mA 1.0 mA 450 mA 3.38 kV 1.91 kV 229 mA 110 mA 69% x Ek ±2% 39% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. 400 mA 450 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.0 450 400 34 2.5 500 400 38 3.0 575 400 37 3.5 575 400 37 4.0 575 400 38 4.5 560 400 37 5.0 500 400 36 5.5 500 400 37 6.0 450 400 37 6.5 375 325 37 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Spec Input VSWR: ......................................2.2:1 .................... 2.5:1 Output VSWR ....................................2.0:1 .................... 2.5:1 Max. Duty ............................................. - .......................... CW Grid Capacitance ............................. 50 pF ................ 65 pF Min. Harmonic Separation ............. -5.0 dBc ................ -2 dBc @ 3.5GHz @ 400W Noise Power Density (dBm/MHz) ...................................... -30 ......................... -20 Prime Power ................................... 1200 W .............. 1500 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 26 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2 GHz – 6.5 GHz Continuous Wave TWT Ɣ MEC 5500E 27 MEC 5208 Continuous Wave TWT 2 GHz – 8 GHz RF Performance • • • • • 175 W Minimum Power 2.0 to 8.0 GHz -40° to 85° C 1398 W Typ. Prime Power 37-62 dB Typical Gain • 20.6” L x 3.25” W x 3.46” H (52.3 x 82.55 x 8.8 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Typ. Sat. Power Output (W) Freq (GHz) Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.85 A -6.0 Vdc -6.5 Vdc 2.5 A Ground Ground 125 Vdc -200 Vdc -5.6 kV 40 mA 5 mA 0.2 mA 0.05 mA 405 mA Ground Ground 90 Vdc -200 Vdc -5.2 kV Ground Ground 190 Vdc -500 Vdc -5.8 kV 55 mA 55 mA 5 mA 0.5 mA 500 mA 3.58 kV 2.8 kV 180 mA 185 mA 64% x Ek ±2% 50% x Ek ±2% 425 mA 500 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.0 200 175 38 2.1 250 200 40 2.2 300 250 41 2.3 425 250 44 2.4 500 250 45 2.5 500 250* 48 3.0 600 250 55 3.5 630 250 58 4.0 600 250 61 4.5 560 250 62 5.0 550 250 61 5.5 525 250 59 6.0 450 250 56 6.5 450 250 53 7.0 400 250 48 7.5 350 250 43 7.7 280 250 40 7.8 265 250 39 8.0 260 250 37 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ...................................1.75:1 ................... 2.0:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 32 pF ................... 50 pF Min. Harmonic Separation .............. -4.5 dBc .............. -3 dBc* Noise Power Density (dBm/MHz) ...................................... -30 ......................... -25 Prime Power ................................... 1398 W .............. 1800 W Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 28 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2 GHz – 8 GHz Continuous Wave TWT භ MEC 5208 29 MEC 5196 Continuous Wave TWT 2.0 GHz – 8.0 GHz RF Performance • • • • • 150 W Minimum Power 2.0 to 8.0 GHz -40° to 85° C 1825 W Typ. Prime Power 26-46 dB Typical Gain • 20.15” L x 4” W x 2.65” H (5.1 x 10.2 x 6.7 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6 Vdc -6.6 Vdc 2.5 A Ground Ground 165 Vdc -200 Vdc -6.2 kV 30 mA 5 mA 0.2 mA 0.05 mA 495 mA Ground Ground 100 Vdc -200 Vdc -5.8 kV Ground Ground 250 Vdc -500 Vdc -6.5 kV 50 mA 50 mA 5 mA 0.5 mA 550 mA 3.95 kV 2.1 kV 350 mA 115 mA 64% x Ek ±2% 34% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 450 mA 550 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 175 500 650 700 700 725 675 630 600 550 525 500 475 150 450 450 450 450 450 450 450 450 450 450 450 450 26 32 40 44 46 46 46 45 45 43 39 34 28 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ...................................1.75:1 ................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 32 pF ................... 50 pF Min. Harmonic Separation .............. -3.5 dBc ................ -3 dBc Noise Power Density (dBm/MHz) ...................................... -35 ......................... -25 Prime Power ................................... 1825 W .............. 1850 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 30 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.0 GHz – 8.0 GHz Continuous Wave TWT භ MEC 5196 31 MTG 5082H Continuous Wave TWT 2.5 GHz – 8.0 GHz RF Performance • • • • • 215 W Minimum Power 2.5 to 8.0 GHz -40° to 85° C 943 W Typ. Prime Power 40-64 dB Typical Gain • 19.9” L x 2.52” W x 3.2” H (50.5 x 6.4 x 8.1 cm) • Phase Match Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.5 230 220 42 3.0 280 275 55 4.0 280 275 62 5.0 280 275 64 6.0 280 275 55 7.0 250 234 48 8.0 250 215 40 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.9 A -6 Vdc -6.6 Vdc 2.5 A Ground Ground 114 Vdc -200 Vdc -5 kV 37 mA 5 mA 0.25 mA 0.01 mA 320 mA Ground Ground 75 Vdc -200 Vdc -4.75 kV Ground Ground 130 Vdc -500 Vdc -5.2 kV 45 mA 45 mA 10 mA 0.1 mA 400 mA 3.25 kV 2.05 kV 138 mA 145 mA 65% x Ek ±2% 41% x Ek ±2% 200 mA 400 mA Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 ...................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 47 pF ................... 50 pF Min. Harmonic Separation .............. -2.5 dBc ................ -2 dBc Noise Power Density (dBm/MHz) ...................................... -12 ........................... -9 Prime Power .................................... 943 W ............... 1085 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 32 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.5 GHz – 8.0 GHz Continuous Wave TWT භ MTG 5082H 33 MEC 5296 Continuous Wave TWT 2.5 GHz – 7.5 GHz RF Performance • • • • • 535 W Minimum Power 2.5 to 7.5 GHz -40° to 85° C 1995 W Typ. Prime Power 31-43 dB Typical Gain • 20.15” L x 4” W x 2.8” H (5.12 x 10.2 x 7.1 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6 Vdc -6.5 Vdc 2.5 A Ground Ground 165 Vdc -200 Vdc -6.15 kV 35 mA 5 mA 0.2 mA 0.05 mA 500 mA Ground Ground 100 Vdc -200 Vdc -5.8 kV Ground Ground 250 Vdc -500 Vdc -6.5 kV 50 mA 50 mA 5 mA 0.5 mA 550 mA 4.31 kV 2.89 kV 300 mA 165 mA 70% x Ek ±2% 47% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 450 mA 550 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.5 600 535 32 3.0 775 535 38 3.5 825 535 40 4.0 775 535 42 4.5 750 535 43 5.0 750 535 43 5.5 700 535 42 6.0 675 535 40 6.5 675 535 38 7.0 635 535 34 7.5 550 535 31 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ...................................1.75:1 ................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 32 pF ................... 50 pF Min. Harmonic Separation ............... -5 dBc ................. -3 dBc Noise Power Density (dBm/MHz) ...................................... -40 ......................... -25 Prime Power ................................... 1995 W .............. 2500 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 34 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.5 GHz – 7.5 GHz Continuous Wave TWT භ MEC 5296 35 MEC 5498 Continuous Wave TWT 2.5 GHz – 7.5 GHz RF Performance • • • • • 535 W Minimum Power 2.5 to 7.5 GHz -40° to 85° C 1995 W Typ. Prime Power 26-43 dB Typical Gain • 17.5” L x 3.25” W x 4.55” H (44.5 x 8.25 x 11.6 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6 Vdc -6.5 Vdc 2.5 A Ground Ground 165 Vdc -200 Vdc -6.15 kV 35 mA 5 mA 0.2 mA 0.05 mA 500 mA Ground Ground 100 Vdc -200 Vdc -5.8 kV Ground Ground 250 Vdc -500 Vdc -6.5 kV 50 mA 50 mA 5 mA 0.5 mA 550 mA 4.31 kV 2.89 kV 300 mA 165 mA 70% x Ek ±2% 47% x Ek ±2% 450 mA 550 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 550 775 825 775 750 750 700 675 675 635 550 535 535 535 535 535 535 535 535 535 535 535 26 38 40 42 43 43 42 40 38 34 31 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ....................................2.2:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 40 pF ................... 60 pF Min. Harmonic Separation ............... -5 dBc ................. -3 dBc Noise Power Density (dBm/MHz) ...................................... -40 ......................... -25 Prime Power ................................... 1995 W .............. 2500 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 36 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.5 GHz – 7.5 GHz Continuous Wave TWT භ MEC 5498 37 MEC 5497 Continuous Wave TWT 2.5 GHz – 7.5 GHz RF Performance • • • • • 400 W Minimum Power 2.5 to 7.5 GHz -40° to 85° C 1575 W Typ. Prime Power 30-43 dB Typical Gain • 17.5” L x 3.25” W x 4.1” H (44.5 x 8.25 x 10.4 cm) • Phase Match Available Typical Operating Conditions Element Voltage Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.5 575 500 31 3.0 700 630 40 3.5 700 630 41 4.0 680 630 43 4.5 725 630 43 5.0 700 630 42 5.5 650 575 40 6.0 600 550 37 6.5 600 550 37 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. 7.0 500 450 32 2.5 A 7.5 450 400 30 Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Coll. #1 -6.3 Vdc 1.93 A -6.0 Vdc -6.6 Vdc Ground Ground 138 Vdc -250 Vdc -5.60 kV 3.584 kV Ground Ground 100 Vdc -250 Vdc -5.4 kV Ground Ground 250 Vdc -350 Vdc -5.7 kV 64% x Ek ±2% 55 mA 55 mA 10 mA 1 mA 475 mA 425 mA Coll. #2 2.184 kV 35 mA 5 mA 0.2 mA 0.05 mA 430 mA 360 mA (w/RF) 42 mA (w/o RF) 35 mA (w/RF) 383 mA (w/o RF) 39% x Ek ±2% 475 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 ...................... 2.5:1 Max. Duty ............................................ — ......................... CW Min. Harmonic Separation ............... -5 dBc ................. -3 dBc Noise Power Density (dBm/MHz) ...................................... -30 ......................... -20 Prime Power ................................... 1575 W .............. 1650 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 38 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.5 GHz – 7.5 GHz Continuous Wave TWT භ MEC 5497 39 M5889NO/MEC 5889 Continuous Wave TWT 4.0 GHz – 8.0 GHz RF Performance • • • • • 250 W Minimum Power 4.0 to 8.0 GHz -40° to 85° C 1300 W Typ. Prime Power 46-59 dB Typical Gain • 20.6” L x 2.52” W x 2.8” H (52.2 x 6.4 x 7.1 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Anode Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.3 A -6 Vdc 3.5 A Ground Ground 240 Vdc 140 Vdc -200 Vdc -8 kV 4.4 kV 6 mA 2 mA 1 mA 0.5 mA 0.5 mA 260 mA 275 mA Ground Ground Ground Ground 0 450 Vdc 125 Vdc 250 Vdc -200 Vdc -500 Vdc -7.7 kV -8.2 kV 55% x Ek ±2% Cathode and Anode voltages are measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Anode voltage not required with Grid modulated version. -6.6 Vdc 12 mA 12 mA 4 mA 10 mA 1 mA 300 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 4.0 260 250 48 4.5 320 250 54 5.0 370 250 57 5.5 395 250 59 6.0 395 250 59 6.5 385 250 57 7.0 370 250 54 7.5 360 250 50 8.0 285 250 46 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.6:1 .................... 2.5:1 Output VSWR ..................................... 2:1 ...................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 50 pF ................... 65 pF Min. Harmonic Separation ............... -8 dBc ................. -4 dBc Noise Power Density (dBm/MHz) ...................................... -20 ......................... -10 Prime Power ................................... 1300 W .............. 1400 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 40 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 4.0 GHz – 8.0 GHz Continuous Wave TWT භ M5889NO/MEC 5889 41 MTG 5130 Continuous Wave TWT 5 GHz – 11 GHz RF Performance • • • • • 300 W Minimum Power 5 to 11 GHz -40° to 85° C 1655 W Typ. Prime Power 38-57 dB Typical Gain • 19.5” L x 4.14” W x 3.82” H (49.6 x 10.5 x 9.7 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.7 A -6.1 Vdc -6.5 Vdc 2.7 A Ground Ground -3 Vdc -1200 Vdc -9.05 kV 25 mA 6 mA 0 0 430 mA Ground Ground 0 -1200 Vdc -8.5 kV Ground Ground -50 Vdc -1500 Vdc -9.6 kV 30 mA 30 mA 0.1 mA 1 mA 475 mA 4.7 kV 3.08 kV 105 mA 300 mA 52% x Ek ±2% 34% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. 250 mA 450 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 400 450 415 500 589 589 646 646 617 537 550 550 450 300 300 400 450 500 500 500 500 500 500 500 400 400 56 56 53 56 57 56 55 54 51 47 45 43 38 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ....................................1.8:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 40 pF ................... 50 pF Min. Harmonic Separation ............... -6 dBc ................. -4 dBc Noise Power Density (dBm/MHz) ...................................... -20 ......................... -18 Prime Power ................................... 1655 W .............. 2000 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 42 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 5 GHz – 11 GHz Continuous Wave TWT භ MTG 5130 43 MEC 5413/MEC 5414 Continuous Wave TWT 6.0 GHz – 18.0 GHz RF Performance • • • • • 200 W Minimum Power 6.0 to 18.0 GHz -40° to 85° C 1132 W Typ. Prime Power 35-46 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5413 – Grid 5414 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -50 Vdc -1300 Vdc 180 Vdc -200 Vdc -10.3 kV 7 mA 1 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 270 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.71 kV 45 mA 218 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 225 245 245 245 225 250 250 250 250 245 240 230 220 200 200 200 200 200 200 200 200 200 200 200 200 200 35 38 41 43 45 46 46 46 45 43 41 38 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation .............. -5.5 dBc ................ -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1132 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 44 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.0 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5413/MEC 5414 45 MEC 5423/MEC 5424 Continuous Wave TWT 6.0 GHz – 18.0 GHz RF Performance • • • • • 250 W Minimum Power 6.0 to 18.0 GHz -40° to 85° C 1191 W Typ. Prime Power 35-46 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5423 – Grid 5424 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -50 Vdc -1300 Vdc 180 Vdc -200 Vdc -10.3 kV 9 mA 1 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 280 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.71 kV 50 mA 221 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 275 290 290 290 275 300 300 300 300 300 290 275 275 250 250 250 250 250 250 250 250 250 250 250 250 250 35 38 41 43 45 46 46 46 45 43 41 38 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation .............. -5.5 dBc ................ -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1191 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 46 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.0 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5423/MEC 5424 47 MEC 5415/MEC 5416 Continuous Wave TWT 6.0 GHz – 18.0 GHz RF Performance • • • • • 300 W Minimum Power 6.0 to 18.0 GHz -40° to 85° C 1251 W Typ. Prime Power 35-46 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5415 – Grid 5416 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -25 Vdc -1300 Vdc 200 Vdc -200 Vdc -10.3 kV 10 mA 2 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 290 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.71 kV 60 mA 220 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 325 330 340 350 325 350 350 350 350 340 330 325 325 300 300 300 300 300 300 300 300 300 300 300 300 300 35 38 41 43 45 46 46 46 45 43 41 38 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation .............. -5.5 dBc ................ -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1251 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 48 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.0 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5415/MEC 5416 49 MEC 5508 Continuous Wave TWT 6.0 GHz – 18.0 GHz RF Performance • • • • • 150 W Minimum Power 6.0 to 18.0 GHz -40° to 85° C 840 W Typ. Prime Power 26-27.5 dB Typical Gain • 11.05” L x 1.47” W x 2.8” H (28.1 x 3.73 x 7.2 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE Drive FE Bias Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.0 180 150 26 7.0 250 200 27 9.0 255 200 27 11.0 260 200 27 12.0 270 200 27.5 13.0 250 200 27 14.0 250 200 27 15.0 260 200 27 16.0 255 200 27 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. 17.0 230 200 26.5 -6.1 Vdc 0.54 A -6.0 Vdc -6.6 Vdc 1.0 A 18.0 220 200 26 Ground Ground -25 V -1600 Vdc -6.7 kV 12 mApk 3 mApk 0.1 mA 0.1 mA 250 mA Ground Ground -10 Vdc -1500 Vdc -6.2 kV Ground Ground -60 V -1700 Vdc -7.2 kV 15 mA 15 mA 1.0 mA 1.0 mA 270 mA 5.03 kV 3.35 kV 1.88 kV 42 mA 112 mA 84 mA 75% x Ek ±2% 50% x Ek ±2% 28% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 100 mA 200 mA 250 mA Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ...................................1.75:1 ................. 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 24 pF ................... 35 pF Min. Harmonic Separation (at 6.0 GHz) ................................. -3.5 dBc ................ -3 dBc Noise Power Density (dBm/MHz) ...................................... -35 ......................... -26 Prime Power .................................... 840 W ............... 1000 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 13-S-1283. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 50 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 13-S-1283. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.0 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5508 51 MEC 5409/MEC 5410 Continuous Wave TWT 6.5 GHz – 18.0 GHz RF Performance • • • • • 200 W Minimum Power 6.5 to 18.0 GHz -40° to 85° C 1095 W Typ. Prime Power 35-48 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5409 – Grid 5410 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -50 Vdc -1300 Vdc 180 Vdc -200 Vdc -10.3 kV 7 mA 1 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 260 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 280 mA 5.36 kV 3.71 kV 45 mA 208 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 280 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.5 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 215 240 250 275 225 275 275 275 275 250 240 230 220 200 200 200 200 200 200 200 200 200 200 200 200 200 35 40 41 43 45 45 46 46 45 43 41 48 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -6 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1095 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 52 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5409/MEC 5410 53 MEC 5421/MEC 5422 Continuous Wave TWT 6.5 GHz – 18.0 GHz RF Performance • • • • • 250 W Minimum Power 6.5 to 18.0 GHz -40° to 85° C 1147 W Typ. Prime Power 35-45 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5421 – Grid 5422 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -25 Vdc -1300 Vdc 200 Vdc -200 Vdc -10.3 kV 8 mA 2 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 270 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.71 kV 50 mA 212 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.5 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 275 275 290 280 275 280 300 300 300 300 285 275 275 250 250 250 250 250 250 250 250 250 250 250 250 250 35 38 41 43 45 45 45 45 45 43 41 38 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -7 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1147 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 54 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5421/MEC 5422 55 MEC 5411/MEC 5412 Continuous Wave TWT 6.5 GHz – 18.0 GHz RF Performance • • • • • 300 W Minimum Power 6.5 to 18.0 GHz -40° to 85° C 1221 W Typ. Prime Power 35-45 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5411 – Grid 5412 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -25 Vdc -1300 Vdc 200 Vdc -200 Vdc -10.3 kV 8 mA 2 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 290 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 15 mA 15 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.71 kV 50 mA 232 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.5 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 310 325 350 350 325 350 375 375 375 365 350 340 325 300 300 300 300 300 300 300 300 300 300 300 300 300 35 38 41 43 45 45 45 45 45 43 41 38 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -7 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1221 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 56 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5411/MEC 5412 57 MEC 5405/MEC 5406 Continuous Wave TWT 7.5 GHz – 18.0 GHz RF Performance • • • • • 200 W Minimum Power 7.5 to 18.0 GHz -40° to 85° C 1047 W Typ. Prime Power 35-55 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5405 – Grid 5406 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -65 Vdc -1300 Vdc 160 Vdc -200 Vdc -10.2 kV 7 mA 0.5 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 250 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 12 mA 12 mA 1 mA 1 mA 10 mA 1 mA 280 mA 5.36 kV 3.67 kV 45 mA 198 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 280 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 7.5 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 250 250 270 250 270 270 270 270 260 250 240 230 200 200 200 200 200 200 200 200 200 200 200 200 35 45 50 55 55 55 55 55 55 55 50 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -8 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1047 W .............. 1250 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 58 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 7.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5405/MEC 5406 59 MEC 5419/MEC 5420 Continuous Wave TWT 7.5 GHz – 18.0 GHz RF Performance • • • • • 250 W Minimum Power 7.5 to 18.0 GHz -40° to 85° C 1083 W Typ. Prime Power 35-55 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5419 – Grid 5420 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -45 Vdc -1300 Vdc 190 Vdc -200 Vdc -10.2 kV 7 mA 1 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 260 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 12 mA 12 mA 1 mA 1 mA 10 mA 1 mA 280 mA 5.36 kV 3.67 kV 45 mA 208 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 280 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 7.5 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 275 275 300 275 300 300 300 300 300 290 280 270 250 250 250 250 250 250 250 250 250 250 250 250 35 45 50 55 55 55 55 55 50 55 50 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -8 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1083 W .............. 1250 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 60 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 7.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5419/MEC 5420 61 MEC 5407/MEC 5408 Continuous Wave TWT 7.5 GHz – 18.0 GHz RF Performance • • • • • 300 W Minimum Power 7.5 to 18.0 GHz -40° to 85° C 1120 W Typ. Prime Power 35-55 dB Typical Gain • 19.8” L x 3.47” W x 3.4” H (50.3 x 8.8 x 8.64 cm) • ±20° Phase Match 5407 – Grid 5408 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.6 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -45 Vdc -1300 Vdc 190 Vdc -200 Vdc -10.2 kV 7 mA 1 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 270 mA Ground Ground 0 -1500 Vdc 125 Vdc -200 Vdc -10 kV Ground Ground -75 Vdc -1700 Vdc 250 Vdc -500 Vdc -10.5 kV 12 mA 12 mA 1 mA 1 mA 10 mA 1 mA 300 mA 5.36 kV 3.67 kV 45 mA 218 mA 52% x Ek ±2% 36% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. 100 mA 300 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 7.5 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 320 325 350 325 340 350 350 350 350 340 330 320 300 300 300 300 300 300 300 300 300 300 300 300 35 45 50 55 55 55 55 55 50 55 50 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 .................... 2.25:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............... -7 dBc ................. -5 dBc Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power ................................... 1120 W .............. 1400 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 62 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 7.5 GHz – 18.0 GHz Continuous Wave TWT භ MEC 5407/MEC 5408 63 MEC 5487 Continuous Wave TWT 8 GHz – 18 GHz RF Performance • • • • • 400 W Typical Minimum Power 8 to 18 GHz -40° to 85° C 1300 W Typical Prime Power 44 to 47 dB Typical Gain @ Specified Power Output • 19.8” L x 3.00” W x 3.34” H (50.3 x 7.62 x 8.5 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. -6.3 Vdc 1.4 A -6.0 Vdc -6.6 Vdc Ground Ground -14 Vdc -250 Vdc -10.45 kV 7.0 mA 0.7 mA 0.1 mA 0.0 mA 301 mA Ground Ground 125 Vdc -200 Vdc -10.0 kV Ground Ground 250 Vdc -500 Vdc -10.5 kV 5.43 kV 3.76 kV 80 mA 213.9 mA 52% x Ek ±2% 36% x Ek ±2% Current Max. 2A 12 mA 12 mA 10 mA 1.0 mA 325 mA 100 mA 320 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 410 325 45 9.0 415 325 44 10.0 400 325 46 11.0 400 325 47 12.0 425 325 46 13.0 425 325 45 14.0 425 325 45 15.0 410 325 45 16.0 425 325 45 17.0 425 325 46 18.0 425 325 47 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Spec Input VSWR: .....................................2.25:1 ................... 2.5:1 Output VSWR ....................................1.8:1 .................. 2.25:1 Max. Duty ............................................. - .......................... CW Grid Capacitance ............................. 50 pF .................. 65 pF Noise Power Density (dBm/MHz) ...................................... -19 ......................... -10 Prime Power ................................... 1300 W ............... 1400W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 64 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8 GHz – 18 GHz Continuous Wave TWT Ɣ MEC 5487 65 MEC 5519 Continuous Wave TWT 11 GHz – 18 GHz RF Performance • • • • • 500 W Minimum Power 11.0 to 18.0 GHz -40° to 85° C 2000 W Typ. Prime Power 54 dB Typical Gain • 19.8” L x 3.9” W x 3.33” H (50.3 x 9.9 x 8.45 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On* Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.0 Vdc 1.67 A -5.8 Vdc -6.6 Vdc 2.0 A Ground Ground -6.0Vdc -12.35 kV 2 mA 7 mA 0 mA 420 mA Ground Ground @ Heater -12 kV Ground Ground @Heater -13.5 kV 10 mA 10 mA 3 mA 425 mA 6.06 kV 3.34 kV 176 mA 237 mA 49% x Ek ±2% 27% x Ek ±2% * FE tied to heater internally for bias 250 mA 420 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 11.0 550 500 55 12.0 560 500 54 13.0 560 500 54 14.0 560 500 54 15.0 560 500 54 16.0 570 500 55 17.0 575 500 55 17.5 575 500 55 18.0 520 450 53 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Spec Input VSWR: .....................................1.93:1 ................. 2.25:1 Output VSWR ...................................1.75:1 ................. 1.80:1 Max. Duty………………………………..--………………..CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation .............. -15 dBc .............. -10 dBc Noise Power Density (dBm/MHz)……………………………-12………………-10 Prime Power ................................. ..2000 W ............. 2200 W Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 66 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 11 GHz – 18 GHz Continuous Wave TWT Ɣ MEC 5519 67 MEC 5493/MEC 5493E Continuous Wave TWT 18.0 GHz – 26.5 GHz RF Performance • • • • • 50 W Minimum Power 18.0 to 26.5 GHz -40° to 85° C 450 W Typ. Prime Power 26-28 dB Typical Gain • 16.1” L x 2.76” W x 3.4” H (62 x 7 x 8.6 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.7 A -5.8 Vdc -6.4 Vdc 1.5 A Ground Ground -19 Vdc -850 Vdc -10.55 kV 1.4 mA 0.5 mA 0.1 mA 0.1 mA 113 mA Ground Ground 0 -800 Vdc -10.3 kV Ground Ground -40 Vdc -1200 Vdc -10.8 kV 4 mA 4 mA 1 mA 0.2 mA 140 mA 5.28 kV 2.64 kV 40.8 mA 70.8 mA 50% x Ek ±2% 25% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. Available with integrated SSM. 75 mA 140 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 18.0 75 50 35 19.0 80 50 38 20.0 80 50 39 21.0 100 50 41 22.0 100 50 41 23.0 100 50 41 24.0 100 50 40 25.0 100 50 40 26.0 90 50 40 26.5 90 50 39 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................2.0:1 .................... 2.5:1 Output VSWR ....................................2.0:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 60 pF Min. Harmonic Separation ............... -8 dBc ................. -6 dBc Noise Power Density (dBm/MHz) ...................................... -25 ......................... -20 Prime Power .................................... 450 W ................. 500 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 68 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 18.0 GHz – 26.5 GHz Continuous Wave TWT Ɣ MEC 5493/MEC 5493E 69 MEC 5496 Continuous Wave TWT 26.5 GHz – 40 GHz RF Performance Typ. Sat. Power Output (W) Freq (GHz) • • • • • 40 W Minimum Power 26.5 to 40 GHz -40° to 85° C 400 W Typ. Prime Power 35-50 dB Typical Gain • 16.45” L x 2.76” W x 2.35” H (41.8 x 7 x 6 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.7 A -5.8 Vdc -6.4 Vdc 1.5 A Ground Ground -6.3 Vdc -1200 Vdc -13.5 kV 2 mA 0.5 mA 0.1 mA 0.1 mA 100 mA Ground Ground 0 -1200 Vdc -12.8 kV Ground Ground -40 Vdc -1500 Vdc -13.8 kV 4 mA 4 mA 1 mA 0.2 mA 110 mA 6.75 kV 3.38 kV 10 mA 80 mA 50% x Ek ±2% 25% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. 50 mA 110 mA Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 26.5 40 40 45 27.0 40 40 46 28.0 40 40 47 29.0 50 40 48 30.0 50 40 50 31.0 50 40 50 32.0 50 40 50 33.0 60 40 50 34.0 70 40 50 35.0 65 40 50 36.0 60 40 50 37.0 55 40 42 38.0 45 40 38 39.0 40 40 36 40.0 40 40 35 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ..................................... 2:1 ......................... 2:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 60 pF Min. Harmonic Separation ............... -8 dBc ................. -6 dBc Noise Power Density (dBm/MHz) ...................................... -25 ......................... -20 Prime Power .................................... 400 W ................. 500 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 70 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 26.5 GHz – 40 GHz Continuous Wave TWT භ MEC 5496 71 This page intentionally left blank Pulse TWTs Page No. Model Frequency (GHz) Peak Power (W) Duty (%) Max. 74 76 78 80 82 84 86 88 90 92 94 96 98 100 102 104 106 108 110 112 114 116 118 120 122 124 126 MEC 3102 MTG 3041L2 MEC 3132 MTG 3041K MEC 3082B MEC 3090X MEC 3103 MEC 3096 MEC 3094A MEC 3119 MTI 3444L MEC 3848 MEC 3106 MEC 3848N MTI 3044C MTI 3044J MTI 3048Q MTI 3048D MTI 3948B MTI 3948 MTI 3948U MEC 3104 MTI 3056C MEC 3116X MEC 3117X MEC 3333 (FWU) MEC 3086 2.0 - 4.0 2.0 - 8.0 2.0 - 8.0 2.5 - 8.0 2.7 – 4.0 2.8 - 3.6 4.0 - 8.0 5.0 - 11.0 5.35 - 5.65 6.0 - 8.0 6.5 - 18.0 8.0 - 11.0 8.0 - 12.0 8.0 - 12.0 8.0 - 12.4 8.0 - 18.0 8.2 - 12.4 8.7 - 10.5 8.8 - 10.5 8.8 - 10.5 9.0 - 10.0 12.0 - 18.0 15.0 - 17.0 15.0 - 18.0 15.2 - 18.2 15.5 - 16.5 15.5 - 17.9 4,500 2,000 1000 2,000* 10,000 13000 4,500 1,780 8,000 7000 1,580* 8,000* 1000* 5,000 1200 1,000 3,000* 4,000* 8,000* 8,700* 7,945 3,470 4,000* 1250 400* 850 700 6 6 6 6 4 2 6 5 4 4 6 5 20 8 4 4 8 10 5 2 5 6 2 4.5 35 33 35 Typical Gain (dB) Min/Max @ Rated Pout 35 38/58 40/48 43/68 41/47 38/41 32/34 37/38 46 41/43 43/46 48/51 26/38 48/50 57/64 42/62 43/50 45/47 48/51 50/51 47/48 32/39 50/56 43/45 34/35 46/48 45/48 Efficiency (%) Typical 29 24 17* 21* 33* 27 34 34 33 33 14* 40 45 32 12* 12* 24* 32* 35* 30* 35 25 16* 20* 32 34 32 Modulation (Control Electrode) GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID GRID Output Connection Weight (lbs/kg) (NTE) SC SC TNC SC SC N WRD 350 WRD 475 SC WRD 350 WRD 650/750 WR 90 TNC WR 90 TNC TNC WR 90 WR 90 WR 90 WR 90 WR 90 WR 62 WR 62 WR-62 WR-51 WR-51 WR 62 15.0/6.8 8.0/3.6 8.0/3.6 8.0/3.6 15.0/6.8 30.0/13.6 15.0/6.8 9.0/4.1 8.0/3.6 15.0/6.8 7.0/3.2 10.0/4.5 2.0/0.9 10.0/4.5 6.0/2.7 6.0/2.7 6.0/2.7 6.0/2.7 7.5/3.4 7.5/3.4 9.5/4.3 9.0/4.1 6.5/3.0 7.0/3.2 2.0/0.9 3.5/1.5 9.5/4.3 * Over majority of frequency range - Performance may be reduced at band edges. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 73 MEC 3102 Pulse TWT 2 GHz – 4 GHz RF Performance • • • • • • 6% Maximum Duty 4.5 kW Minimum Power 2.0 to 4.0 GHz -40° to 85° C 1220 W Typ. Prime Power @6% 35 dB Typical Gain • 25.7” L x 4” W x 4.07” H (65.3 x 10.2 x 10.34 cm) • Phase Match Available Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.0 5500 4500 35 2.25 5500 4500 35 2.5 6000 4500 35 2.75 6500 4500 35 3.0 6500 4500 35 3.25 6500 4500 35 3.5 6000 4500 35 3.75 5500 4500 35 4.0 5500 4500 35 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. -6.5 Vdc 4.3 A -6.4 Vdc -6.8 Vdc 5.00 A Performance Ground Ground 157 Vpk -325 Vdc -10.9 kV 600 mA 70 mA 3.3 mA 0.010 mA 2.3 Apk Ground Ground 100 Vpk -300 Vdc -10.2 kV Ground Ground 300 Vpk -500 Vdc -11.2 kV 800 mApk @ 6% 800 mApk @ 6% 30 mApk 1 mA 2.5 Apk 8.7 kV 7.7 kV 4.21 kV 530 mApk 780 mApk 425 mApk Input VSWR .......................................2.0:1 .................... 2.5:1 Output VSWR ....................................1.7:1 .................... 2.0:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 59 pF ................... 65 pF Min. Harmonic Separation .............. -3.8 dBc ................ -3 dBc Noise Power Density (dBm/MHz) ...................................... -30 ............................ 5 Prime Power ................................... 1220 W .............. 1800 W Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Freq (GHz) 80% x Ek ±2% 71% x Ek ±2% 39% x Ek ±2% 0.7 Apk 1.2 Apk 2.5 Apk Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 74 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2 GHz – 4 GHz Pulse TWT භ MEC 3102 75 MTG 3041L2 Pulse TWT 2.0 GHz – 8.0 GHz RF Performance • • • • • • 6% Maximum Duty 2 kW Minimum Power 2.0 to 8.0 GHz -40° to 85° C 725 W Typ. Prime Power @6% 38-58 dB Typical Gain • 21.25” L x 2.55” W x 3.25” H (54 x 6.5 x 8.3 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc -6.5 Vdc 3.0 A Ground Ground 217 Vpk -250 Vdc -8.5 kV 6.38 kV 650 mApk 150 mApk 1.8 mApk 0.01 mA 1.65 Apk 1 Apk Ground Ground 100 Vpk -250 Vdc -8.2 kV Ground Ground 250 Vpk -500 Vdc -8.8 kV 75% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 700 mApk @ 6% 700 mApk @ 6% 20 mApk 0.1 mA 1.8 Apk 1.8 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.0 2.2 2.3 2.5 2.6 3.0 4.0 5.0 6.0 7.0 7.5 8.0 2040 2040 2300 2400 2500 2500 2500 2500 2500 2350 2300 2040 2000* 2000 2000** 2000 2000*** 2000 2000 2000 2000 2000 2000 2000 38 38 39 40 44 50 57 58 55 50 48 44 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer and limiter (for harmonic injection). Performance Typical Spec Input VSWR .......................................3.5:1 .................... 3.5:1 Output VSWR ....................................1.8:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 47 pF ................... 50 pF Min. Harmonic Separation (dBc) ......................................... 3.5/0/-2.5 ....4.5*/1.5**/-1*** Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power .................................... 725 W ................. 800 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 76 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.0 GHz – 8.0 GHz Pulse TWT භ MTG 3041L2 77 MEC 3132 Pulse TWT 2.0 GHz – 8.0 GHz RF Performance • 1kW Minimum Power • 2.0 to 8.0 GHz • -40° to 85° C • 6% Maximum Duty • 40-48 dB Typical Gain for Sat. • 21.0” L x 2.45” W x 3.0” H (53.3 x 6.2 x 7.62 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 2.0 1100 1000 Typ. Gain @ Saturated Power (dB) 40 3.0 1500 1000 46 4.0 1700 1000 47 5.0 1900 1000 48 6.0 1800 1000 47 7.0 1800 1000 47 8.0 1800 1000 47 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Current Typical Power Supply Requirements Voltage Min. Voltage Max. Current Max. Performance -6.3 Vdc 1.7 A -6.0 Vdc -6.6 Vdc 2.5A Ground Ground 185 Vpk -200 Vdc -8.6kV 6.02kV 400 mApk 150 mApk 1 mApk 0.1 mA 1.35 Apk 0.95 Apk Ground Ground 130 Vpk -200 Vdc -8.0 kV Ground Ground 230 Vpk -300 Vdc -9.2 kV 70% x Ek ±2% Input VSWR .......................................2.0:1 .................... 3.0:1 Output VSWR ....................................2.0:1 .................... 3.0:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Noise Power Density (2 to 8 GHz) (dBm/MHz) ...................................... -10 ............................ 0 Prime Power …………………………..612 W……….......750 W 500 mApk 500 mApk 20 mApk 0.5 mA 1.7 Apk 1.7 Apk Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 78 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.0 GHz – 8.0 GHz Pulse TWT Ɣ MEC 3132 79 MTG 3041K Pulse TWT 2.5 GHz – 8.0 GHz RF Performance • • • • • • 6% Maximum Duty 1900 W Minimum Power 2.5 to 8.0 GHz -40° to 85° C 650 W Typ. Prime Power @6% 43-68 dB Typical Gain • 21.25” L x 2.55” W x 3.25” H (54 x 6.5 x 8.3 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc 3.0 A Ground Ground 217 Vpk -250 Vdc -8.6 kV 6.45 kV 400 mApk 150 mApk 1.8 mApk 0.01 mA 1.4 Apk 1.0 Apk Ground Ground Ground Ground 100 Vpk 250 Vpk -250 Vdc -500 Vdc -8.2 kV -8.8 kV 75% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. -6.5 Vdc 600 mApk @ 6% 600 mApk @ 6% 50 mApk 0.1 mA 2.0 Apk 2.0 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.5 2000 1900 50 2.7 2040 2000 52 3.0 2150 2000 54 4.0 2450 2000 60 5.0 2450 2000 68 6.0 2450 2000 59 7.0 2450 2000 51 8.0 2400 2000 43 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ........................................ 2:1 ...................... 2.5:1 Output VSWR ....................................1.8:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 47 pF ................... 50 pF Min. Harmonic Separation .............. -1.7 dBc ............. -1.5 dBc Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power .................................... 650 W ................. 750 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 80 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.5 GHz – 8.0 GHz Pulse TWT භ MTG 3041K 81 MEC 3082B Pulse TWT 2.7 GHz – 4.0 GHz RF Performance • • • • • • 4% Typical Maximum Duty 10 kW Minimum Power 2.7 to 4.0 GHz -40° to 85° C 1400 W Typ. Prime Power @4% 42-47 dB Typical Gain • 23.5” L x 4” W x 4.2” H (59.7 x 10.2 x 10.7 cm) • ±20° Typical Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector Coll. #1 Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 2.7 10,000 10,000 42 2.9 10,500 10,000 45 3.25 12,500 10,000 47 3.4 12,500 10,000 46 3.7 13,325 10,000 45 3.85 13,500 10,000 45 4.0 13,800 10,000 43 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Performance -6.6 Vdc 4.5 A -6.4 Vdc -6.8 Vdc 5A Ground Ground 175 Vpk -400 Vdc -14.49 kV 0.63 Apk 0.12 Apk 2.0 mApk 0 mA 2.94 Apk Ground Ground 100 Vpk -400 Vdc -12.5 kV Ground Ground 250 Vpk -500 Vdc -15 kV 0.8 Apk @ 4% 0.8 Apk @ 4% 30 mApk 1.0 mA 3.5 Apk 12.75 kV 1.080 Apk (w/RF) 0.172 Apk (w/o RF 0.746 Apk (w/RF) 0.093 Apk (w/o RF) 0.378 Apk (w/RF) 2.630 Apk (w/o RF) Input VSWR ......................................1.55:1 ...................... 2:1 Output VSWR ....................................1.6:1 ....................... 2:1 Max. Duty ............................................ — .......................... 4% Max. Pulsewidth .................................. — .................... 150 μs Grid Capacitance .............................. 45 pF ................... 50 pF Second Harmonic ........................... -8.7 dBc ................ -6 dBc Noise Power Density (dBm/MHz) ...................................... -26 ......................... -20 Prime Power ................................... 1400 W ..... 1500 W max. Coll. #2 8.58 kV Coll. #3 4.69 kV Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 88% x Ek ±2% 2 Apk 66% x Ek ±2% 3.5 Apk 41% x Ek ±2% 3.5 Apk Typical Spec This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 82 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.7 GHz – 4.0 GHz Pulse TWT Ɣ MEC 3082B 83 MEC 3090X Pulse TWT 2.8 GHz – 3.6 GHz RF Performance • 2% Maximum Duty • 14+ kWpk Typical Minimum Power • 2.8 to 3.6 GHz • Liquid Cooled Design • On board Vac-Ion Pump • 1300 W Typ. Prime Power • 100 μS PW Max • 40 dB Typical Sat. Gain • 27.5” L x 4.75” W x 3.72” H (70 x 12 x 9.45 cm) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Sat. Power (dB) 2.8 13500 13000 38 2.9 14500 13000 39 3.0 16000 13000 40 3.1 17500 13000 41 3.2 19500 13000 41 3.3 21000 13000 41 3.4 21000 13000 41 3.5 21000 13000 41 3.6 19500 13000 41 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. -6.3 Vdc 5.55 A -6.1 Vdc 6A Performance Ground Ground 216 Vpk -300 Vdc -16.75 kV 14.75 kV 3.3 kV 1.39 Apk 300 mApk 1.0 mApk 0.1 mA 4.63 Apk 3.24 Apk 0 to 5 uA Ground Ground Ground Ground 175 Vpk 350 Vpk -300 Vdc -500 Vdc -16.0 kV -17.0 kV 88% x Ek ±2% 3.3 kV 1.5 Apk 1.5 Apk 50 mApk 0.5 mA 5.0 Apk 4.8 Apk 5.0 uA Input VSWR .......................................1.5:1 .................... 2.0:1 Output VSWR ....................................1.7:1 .................... 2.5:1 Max. Duty ........................................... 2% ......................... 2% Max. Pulsewidth .............................. 100 μs ................ 100 μs Grid Capacitance .............................. 55 pF .......... 65 pF max. Prime Power .................................... 1300W ............... 1400 W Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Vac-Ion Pump Freq (GHz) -6.5 Vdc Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 84 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.8 GHz – 3.6 GHz Pulse TWT Ɣ MEC 3090X 85 MEC 3103 Pulse TWT 4 GHz – 8 GHz RF Performance • • • • • • 6% Maximum Duty 4500 W Minimum Power 4.0 to 8.0 GHz -40° to 85° C 1185 W Typ. Prime Power @6% 32-34 dB Typical Gain • 22.27” L x 5.54” W x 4.34” H (56 x 14 x 11 cm) • Phase Match Available Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 4.0 4790 4500 32 4.5 4570 4500 33 5.0 4570 4500 33 5.5 6170 4500 34 6.0 6310 4500 34 6.5 5890 4500 34 7.0 5890 4500 33 7.5 5750 4500 33 8.0 4790 4500 32 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. -6.3 Vdc 2.25 A -6.1 Vdc -6.5 Vdc 3.0 A Performance Ground Ground 216 Vpk -300 Vdc -12.6 kV 600 mApk 80 mApk 3 mA 0.1 mA 1.9 Apk Ground Ground 100 Vpk -300 Vdc -12 kV Ground Ground 300 Vpk -500 Vdc -14 kV 800 mApk @ 6% 800 mApk @ 6% 30 mApk 1.0 mA 3.0 Apk 9.70 kV 7.30 kV 5.65 kV 485 mApk 555 mApk 700 mApk Input VSWR .......................................1.8:1 .................... 2.5:1 Output VSWR ....................................1.9:1 .................... 2.0:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 64 pF ................... 70 pF Min. Harmonic Separation .............. -5.1 dBc ............. -0.5 dBc Noise Power Density (dBm/MHz) ...................................... -29 ........................... -5 Prime Power ................................... 1185 W .............. 1800 W Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Freq (GHz) 77% x Ek ±2% 58% x Ek ±2% 45% x Ek ±2% 700 mApk 1200 mApk 2700 mApk Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 86 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 4 GHz – 8 GHz Pulse TWT භ MEC 3103 87 MEC 3096 Pulse TWT 5.0 GHz – 11.0 GHz RF Performance • • • • • • 5% Maximum Duty 1780 W Minimum Power 5.0 to 11.0 GHz -40° to 85° C 570 W Typ. Prime Power @5% 37-38 dB Typical Gain • 19” L x 2.48” W x 3.65” H (48.3 x 6.3 x 9.27 cm) • Phase Match Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.0 2400 1780 38 6.0 2750 1780 38 7.0 2290 1780 38 8.0 2510 1780 38 9.0 2750 1780 38 10.0 2750 1780 38 11.0 2090 1780 37 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF w/o RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Performance -6.3 Vdc 2.0 A -5.985 Vdc -6.615 Vdc 2.8 A Ground Ground 225 Vpk -200 Vdc -10.2 kV 270 mApk 100 mApk 0 mApk 0 mA 1300 mApk Ground Ground 100 Vpk -200 Vdc -10.2 kV Ground Ground 250 Vpk -200 Vdc -11 kV 500 mApk @ 5% 500 mApk @ 5% 10 mApk 1.0 mA 1300 mApk 8.16kV 8.16 kV 1030 mApk 1200 mApk Input VSWR .......................................1.8:1 .................... 2.0:1 Output VSWR ....................................1.8:1 .................... 2.0:1 Max. Duty ........................................... 5% ......................... 5% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 48 pF .......... 50 pF max. Min. Harmonic Separation .............. -5.5 dBc ....... -3 dBc max. Noise Power Density (dBm/MHz) .................................... -19.5 ......................... .0 Prime Power .................................... 570 W ............... 1000 W 80% x Ek ±2% 80% x Ek ±2% 800-1200 mApk 1300 mApk Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 88 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 5.0 GHz – 11.0 GHz Pulse TWT භ MEC 3096 89 MEC 3094A Pulse TWT 5.35 GHz – 5.65 GHz RF Performance • • • • • 4% Maximum Duty 8 kW Minimum Power 5.35 to 5.65 GHz 1000 W Typ. Prime Power @4% 46 dB Typical Gain • 21.25” L x 2.55” W x 3.25” H (54 x 6.48 x 8.26 cm) • Phase Match Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.35 8510 8000 46 5.40 8130 8000 46 5.45 7800 8000 46 5.50 8200 8000 46 5.55 8300 8000 46 5.60 8200 8000 46 5.65 8100 8000 46 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF w/o RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Performance Input VSWR .......................................1.3:1 ....................... 2:1 Output VSWR ....................................1.5:1 ....................... 2:1 Max. Duty ............................................ — .......................... 4% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 40 pF ................... 60 pF Noise Power Density (dBm/MHz) ...................................... -35 ......................... -10 Prime Power ................................... 1000 W .............. 1100 W -6.3 Vdc 2.25 Apk -6.0 Vdc -6.6 Vdc 3.0 A Ground Ground 180 Vpk -300 Vdc -14.0 kV 300 mApk 80 mApk 1.8 mApk 0 mA 2.3 Apk Ground Ground 100 Vpk -300 Vdc -13.5 kV Ground Ground 250 Vpk -300 Vdc -14.5 kV 500 mApk @ 4% 500 mApk @ 4% 30 mApk 1 mApk 2.8 Apk 10.3 kV 10.3 kV 2.0 Apk 2.2 Apk 73.5% x Ek ±2% 73.5% x Ek ±2% Typical Spec 2.8 Apk 2.8 Apk Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 90 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 5.35 GHz – 5.65 GHz Pulse TWT භ MEC 3094A 91 MEC 3119 Pulse TWT 6.0 GHz – 8.0GHz RF Performance • • • • • • • 4% Maximum Duty 7000 Wpk Minimum Power 6 to 8 GHz -40° to 85° C 900 Wpk Typ Prime Power @ 4% 160 μS PW Max 42 dB Typical Sat. Gain • 22.27” L x 5.54” W x 4.34” H (56 x 14 x 11 cm) Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Sat. Power (dB) 6.0 8500 7000 42 6.5 8800 7000 42 7.0 8900 7000 43 7.5 8500 7000 42 8.0 7500 7000 41 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.23 A -6.1 Vdc -6.5 Vdc 3.0 A Ground Ground 150 Vpk -250 Vdc -13.8 kV 542 mApk 45 mApk 2.0 mApk 0.0 mA 2468 mApk Ground Ground 100 Vpk -300 Vdc -13.0 kV Ground Ground 220 Vpk -500 Vdc -14.5 kV 800 mApk 800 mApk 30 mApk 1 mA 3000 mApk 10.63 kV 8.00 kV 6.21 kV 512 mApk 760 mApk 654 mApk 77% x Ek ±2% 58% x Ek ±2% 45% x Ek ±2% Typical Spec Input VSWR: ......................................1.3:1 .................... 1.6:1 Output VSWR ....................................1.6:1 .................... 2.0:1 Max. Duty ........................................... 4% ......................... 4% Max. Pulsewidth .............................. 160 μs ................ 160 μs Grid Capacitance .............................. 55 pF .......... 65 pF max. Noise Power Density (dBm/MHz) ...................................... -22 ......................... -20 Prime Power @ 4% ........................ ..950 W .............. 1800 W 700 mApk 1200 mApk 2700 mApk Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 92 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.0 GHz – 8.0 GHz Pulse TWT Ɣ MEC 3119 93 MTI 3444L Pulse TWT 6.5 GHz – 18.0 GHz RF Performance • • • • • • 6% Maximum Duty 1260 W Minimum Power 6.5 to 18.0 GHz -40° to 85° C 818 W Typ. Prime Power @6% 43-46 dB Typical Gain • 17.3” L x 2.72” W x 3.3” H (44 x 6.9 x 8.38 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.9 A -6.1 Vdc 2.5 A Ground Ground 160 Vpk -200 Vdc -11.2 kV 7 kV 450 mApk 110 mApk 4 mApk 0.1 mA 1.65 Apk 1.2 Apk Ground Ground Ground Ground 100 Vpk 250 Vpk -200 Vdc -500 Vdc -10.5 kV -11.5 kV 63% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. -6.5 Vdc 500 mApk @ 6% 500 mApk @ 6% 20 mApk 0.5 mA 1.9 Apk 1.9 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 6.5 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 1320 1580 2140 2340 1660 2140 2450 2510 2450 2400 2240 2000 1700 1260 1510 1580 1580 1580 1580 1580 1580 1580 1580 1580 1580 1580 43 44 45 46 46 46 46 46 46 46 46 46 45 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Spec Input VSWR .......................................2.2:1 .................... 2.5:1 Output VSWR ....................................2.3:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 38 pF ................... 50 pF Min. Harmonic Separation ............... -3 dBc ................. -2 dBc Noise Power Density (dBm/MHz) ........................................2 ............................. 3 Prime Power .................................... 818 W ................. 950 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 94 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 6.5 GHz – 18.0 GHz Pulse TWT භ MTI 3444L 95 MEC 3848 Pulse TWT 8.0 GHz – 11.0 GHz RF Performance • • • • • • 5% Maximum Duty 6500 W Minimum Power 8.0 to 11.0 GHz -40° to 85° C 947 W Typ. Prime Power @ 5% 48-51 dB Typical Gain • 15.8” L x 4” W x 4.44” H (40.1 x 10.2 x 11.3 cm) • ±15° Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6.1 Vdc -6.5 Vdc 2.50 A Ground Ground 150 Vpk -300 Vdc -13.3 kV 400 mApk 75 mApk 0 0 2.3 Apk Ground Ground 100 Vpk -300 Vdc -13 kV Ground Ground 300 Vpk -500 Vdc -15 kV 500 mApk @ 5% 500 mApk @ 5% 30 mApk 0.5 mA 2.8 Apk 9.0 kV 6. 4 kV 4.7 kV 0.84 Apk 0.48 Apk 0.58 Apk 69% x Ek ±2% 48% x Ek ±2% 35% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 1.1 Apk 0.8 Apk 2.5 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 8000 7500 48 8.5 8300 8000 48 9.0 8300 8000 49 9.2 8300 8000 50 9.4 8300 8000 50 9.6 8300 8000 50 9.8 8300 8000 50 10.0 8300 8000 51 10.5 8000 7500 50 11.0 7000 6500 49 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.5:1 ....................... 2:1 Output VSWR ....................................1.5:1 ....................... 2:1 Max. Duty ............................................ — .......................... 5% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 40 pF ................... 60 pF Min. Harmonic Separation .............. -14 dBc .............. -10 dBc Noise Power Density (dBm/MHz) ...................................... -14 ......................... -10 Prime Power .................................... 947 W ............... 1200 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 96 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.0 GHz – 11.0 GHz Pulse TWT භ MEC 3848 97 MEC 3106 Pulse TWT 8.0 GHz – 12.0 GHz RF Performance • • • • • • 10% Typical Maximum Duty 900 W Minimum Power 8.0 to 12.0 GHz -40° to 85° C 438 W Typ. Prime Power @10% 26-38 dB Typical Gain • 9.9” L x 1.6” W x 1.57” H (25.1 x 4.1 x 4 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.75 A -6.1 Vdc -6.5 Vdc 2.0 A Ground Ground 100 Vpk -200 Vdc -6.6 kV 300 mApk 60 mApk 1.0 mApk 0 mA 940 mApk Ground Ground 90 Vpk -200 Vdc -6.5 kV Ground Ground 200 Vpk -500 Vdc -7.0 kV 325 mApk @ 10% 325 mApk @ 10% 30 mApk 1.0 mA 1.0 Apk 4.90 kV 3.04 kV 1.91 kV 318 mApk 242 mApk 76 mApk 71% x Ek ±2% 46% x Ek ±2% 29% x Ek ±2% 500 mApk 1.0 Apk 1.0 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 1000 900 38 8.5 1000 900 34 9.0 1100 1000 33 9.5 1250 1000 31 10.0 1300 1000 31 10.5 1300 1000 29 11.0 1300 1000 27 11.5 1200 1000 27 12.0 1000 900 26 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.6:1 .................... 2.0:1 Output VSWR ...................................1.83:1 ................... 2.0:1 Max. Duty .......................................... 10% ...................... 10% Max. Pulsewidth ............................... 50 μs ................... 50 μs Grid Capacitance .............................. 53 pF ................... 60 pF Min. Harmonic Separation .............. -12 dBc .............. -10 dBc Noise Power Density (dBm/MHz) ...................................... -27 ......................... -20 Prime Power .................................... 438 W ................. 500 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 13-S-1396. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 98 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 13-S-1396. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.0 GHz – 12.0 GHz Pulse TWT භ MEC 3106 99 MEC 3848N Pulse TWT 8 GHz – 12 GHz RF Performance • • • • • • 10% Maximum Duty 5 kW Minimum Power 8.0 to 12.0 GHz -40° to 85° C 1250 W Typ. Prime Power @8% 41-50 dB Typical Gain • 15.8” L x 2.8” W x 4.5” H (40.1 x 7.1 x 11.4 cm) • ±15° Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.1 A -6.1 Vdc -6.5 Vdc 2.50 A Ground Ground 150 Vpk -350 Vdc -13.0 kV 250 mApk 75 mApk 0.0 mApk 0.0 mA 1.8 Apk Ground Ground 100 Vpk -300 Vdc -13 kV Ground Ground 300Vpk -500 Vdc -15 kV 300 mApk @ 8% 300 mApk @ 8% 30 mApk 0.5 mA 2.5 Apk 8.97 kV 6.24 kV 4.55 kV 650 mApk 430 mApk 470 mApk 69% x Ek ±2% 48% x Ek ±2% 35% x Ek ±2% 1.1 mApk 0.8 mApk 2.5 mApk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 6610 5000 48 8.5 7080 5000 48 9.0 7080 5000 49 9.5 6610 5000 50 10.0 6610 5000 50 10.5 7240 5000 49 11.0 6760 5000 48 11.5 6610 5000 44 12.0 5620 5000 41 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ......................................1.82:1 ................... 2.0:1 Output VSWR ...................................1.65:1 ................... 2.0:1 Max. Duty ........................................... 8% ....................... 10% Max. Pulsewidth ............................... 50 μs ................. 100 μs Grid Capacitance .............................. 50 pF .......... 50 pF max. Min. Harmonic Separation ............. -13.0 dBc ............. -10 dBc Noise Power Density (dBm/MHz) ...................................... -20 ......................... -10 Prime Power ................................... 1250 W .............. 1700 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 100 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8 GHz – 12 GHz Pulse TWT භ MEC 3848N 101 MTI 3044C Pulse TWT 8.0 GHz – 12.4 GHz RF Performance • • • • • • 4% Maximum Duty 1.2 kW Minimum Power 8.0 to 12.4 GHz -40° to 85° C 583 W Typ. Prime Power @4% 57 - 62 dB Typical Gain • 14.35” L x 3” W x 1.7” H (36.45 x 7.77 x 4.3 cm) Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 1500 1200 57 9.0 1600 1200 60 10.0 2000 1200 63 11.0 2000 1200 64 12.0 2300 1200 64 12.4 2300 1200 64 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Performance Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.9 A -6.0 Vdc -6.6 Vdc 2.2 A Ground Ground 134 Vpk -150 Vdc -11.4 kV 8.2 kV 310 mApk 75 mApk 1 mApk 0.2 mA 1.58 Apk 1.27 Apk Ground Ground 100 Vpk -150 Vdc -10.5 kV Ground Ground 220 Vpk -200 Vdc -11.5 kV 72% x Ek ±2% 600 mApk @ 4% 600 mApk @ 4% 20 mApk 1 mA 1.8 Apk 1.8 Apk Typical Spec Input VSWR .......................................1.6:1 .................... 2.5:1 Output VSWR ....................................1.5:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 4% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 46 pF ................... 50 pF Min. Harmonic Separation .............. -4.3 dBc ................ -3 dBc Noise Power Density (dBm/MHz) ...................................... -12 ........................... -8 Prime Power .................................... 583 W ................. 750 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 102 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.0 GHz – 12.4 GHz Pulse TWT භ MTI 3044C 103 MTI 3044J Pulse TWT 8.0 GHz – 18.0 GHz RF Performance • • • • • • 4% Maximum Duty 1 kW Minimum Power 8.0 to 18.0 GHz -40° to 85° C 566 W Typ. Prime Power @4% 42-62 dB Typical Gain • 14.35” L x 3” W x 1.7” H (36.45 x 7.77 x 4.3 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.0 1170 1000 54 9.0 1475 1000 60 10.0 1580 1000 60 11.0 1780 1000 62 12.0 2140 1000 62 13.0 2250 1000 61 14.0 2090 1000 59 15.0 2000 1000 58 16.0 2000 1000 55 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. 17.0 1900 1000 48 -6.3 Vdc 1.9 A -6.1 Vdc -6.5 Vdc 2.5 A 18.0 1250 1000 42 Ground Ground 123 Vpk -200 Vdc -11.2 kV 8 kV 325 mApk 75 mApk 1 mApk 0.2 mA 1.6 Apk 1.275 Apk Ground Ground 100 Vpk -200 Vdc -10.5 kV Ground Ground 200 Vpk -500 Vdc -11.5 kV 72% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 500 mApk @ 4% 500 mApk @ 4% 30 mApk 1 mA 1.8 Apk 1.8 Apk Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................2.1:1 .................... 2.5:1 Output VSWR ....................................1.9:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 4% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 46 pF ................... 50 pF Min. Harmonic Separation .............. -4.3 dBc ................ -3 dBc Noise Power Density (dBm/MHz) ...................................... -12 ........................... -8 Prime Power .................................... 566 W ................. 750 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 104 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.0 GHz – 18.0 GHz Pulse TWT භ MTI 3044J 105 MTI 3048Q Pulse TWT 8.2 GHz – 12.4 GHz RF Performance • • • • • • 8% Maximum Duty 2500 W Minimum Power 8.2 to 12.4 GHz -40° to 85° C 1020 W Typ. Prime Power @8% 43-50 dB Typical Gain • 15.0” L x 2.75” W x 2.8” H (38.1 x 7.0 x 7.1 cm) Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.2 2600 2500* 45 8.5 3500 3000 47 9.0 4000 3000 50 10.0 4300 3000 50 11.0 4180 3000 48 12.4 3020 3000 43 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Performance Typical Spec Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.7 A -6.1 Vdc -6.5 Vdc 2.5 A Ground Ground 200 Vpk -200 Vdc -12 kV 300 mApk 70 mApk 2.5 mApk 0 1.6 Apk Ground Ground 110 Vpk -150 Vdc -11 kV Ground Ground 300 Vpk -230 Vdc -13 kV 550 mApk @ 8% 450 mApk @ 8% 150 mApk 0.5 mA 2 Apk Input VSWR .......................................2.3:1 .................... 2.5:1 Output VSWR ....................................2.0:1 .................... 2.5:1 Max. Duty ............................................ — .......................... 8% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 49 pF ................... 55 pF Min. Harmonic Separation .............. -10 dBc .............. -8 dBc* Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1020 W .............. 1300 W 7.8 kV 5 kV 0.9 Apk 0.4 Apk 1.2 Apk 2 Apk * Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. 65% x Ek ±5% 42% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 106 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.2 GHz – 12.4 GHz Pulse TWT භ MTI 3048Q 107 MTI 3048D Pulse TWT 8.7 GHz – 10.5 GHz RF Performance • • • • • • 10% Maximum Duty 3 kW Minimum Power 8.7 to 10.5 GHz -40° to 85° C 1270 W Typ. Prime Power @10% 45-47 dB Typical Gain • 15.0” L x 2.75” W x 2.8” H (38.1 x 7.0 x 7.1 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.7 A -6.1 Vdc -6.5 Vdc 2.5 A Ground Ground 200 Vpk -200 Vdc -11.9 kV 300 mApk 70 mApk 2 mApk 0 1.6 Apk Ground Ground 110 Vpk -150 Vdc -11 kV Ground Ground 300 Vpk -230 Vdc -13 kV 230 mApk @ 10%** 75 mApk @ 10% 150 mApk 0.5 mA 2 Apk 7.8 kV 5 kV 0.9 Apk 0.4 Apk 65% x Ek ±5% 42% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. ** May not exceed 23 mA avg. at any duty. Typ. Sat. Power Output (W) Freq (GHz) 1.2 Apk 2 Apk Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.7 3700 3500 46 8.8 3800 3500 46 8.9 3900 3600 46 9.0 4000 3600* 46 9.2 4000 3800 46 9.4 4100 4000 46 9.6 4100 4000 47 9.8 4200 4000 47 10.0 4200 4000 47 10.1 4100 3800 47 10.2 4000 3700 47 10.3 3800 3600 46 104 3600 3200 46 10.5 3400 3000 45 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.8:1 .................... 2.0:1 Output VSWR ....................................1.8:1 .................... 2.0:1 Max. Duty ............................................ — ........................ 10% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 49 pF ................... 55 pF Min. Harmonic Separation .............. -16 dBc ............ -10 dBc* Noise Power Density (dBm/MHz) ...................................... -15 ......................... -10 Prime Power ................................... 1270 W .............. 1400 W * Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 108 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.7 GHz – 10.5 GHz Pulse TWT භ MTI 3048D 109 MTI 3948B Pulse TWT 8.8 GHz – 10.5 GHz RF Performance • • • • • • 5% Maximum Duty 7400 W Minimum Power 8.8 to 10.5 GHz -54° to 85° C 1179 W Typ. Prime Power @5% 48-51 dB Typical Gain • 15.45” L x 2.77” W x 3.25” H (39.2 x 7 x 8.27 cm) • ±15° Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc -6.5 Vdc 2.5 A Ground Ground 250 Vpk -300 Vdc -14.2 kV 400 mApk 75 mApk 0 0 2.3 Apk Ground Ground 100 Vpk -300 Vdc -14 kV Ground Ground 300 Vpk -500 Vdc -15 kV 500 mApk @ 5% 460 mApk @ 5% 30 mApk 0.5 mA 2.5 Apk 11.7 kV 8.5 kV 0.4 Apk 1.5 Apk 80% x Ek ±2% 58% x Ek ±2% 1 Apk 2.5 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.8 8.9 9.0 9.2 9.4 9.6 9.8 10.0 10.1 10.2 10.3 10.4 10.5 7400 7800 8300 8350 8400 8500 8600 8700 8700 8700 8300 8200 8200 6800 7400 8000 8000 8000 8000 8000 8000 8000 8000 7800 7500 7500 48 49 50 50 50 50 51 51 51 51 50 50 49 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.5:1 .................... 2.0:1 Output VSWR ....................................1.5:1 .................... 1.8:1 Max. Duty ............................................ — .......................... 5% Max. Pulsewidth .................................. — ...................... 50 μs Min. Harmonic Separation .............. -12 dBc .............. -10 dBc Noise Power Density (dBm/MHz) ...................................... -14 ......................... -10 Prime Power ................................... 1179 W .............. 1300 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 110 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.8 GHz – 10.5 GHz Pulse TWT භ MTI 3948B 111 MTI 3948 Pulse TWT 8.8 GHz – 10.5 GHz RF Performance • • • • • • 2% Maximum Duty 8200 W Minimum Power 8.8 to 10.5 GHz -40° to 85° C 621 W Typ. Prime Power @2% 50-51 dB Typical Gain • 15.4” L x 2.75” W x 3.25” H (39.2 x 7 x 8.3 cm) • ±15° Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc -6.5 Vdc 2.5 A Ground Ground 250 Vpk -300 Vdc -14.2 kV 470 mApk 75 mApk 0 0 2.5 Apk Ground Ground 50 Vpk -300 Vdc -14 kV Ground Ground 250 Vpk -500 Vdc -15 kV 800 mApk @ 2% 800 mApk @ 2% 30 mApk 0.5 mA 2.5 Apk 11 kV 2.13 Apk 75% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 2.5 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 8.8 8.9 9.0 9.2 9.4 9.6 9.8 10.0 10.1 10.2 10.3 10.4 10.5 8510 8700 8700 8800 8900 8900 8900 8900 8900 8800 8800 8800 8700 8200 8600 8700 8700 8700 8700 8700 8700 8700 8700 8700 8700 8500 50 50 51 51 51 51 51 51 51 51 51 51 50 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Higher gain is available with SSA. Performance Typical Spec Input VSWR .......................................1.5:1 .................... 2.0:1 Output VSWR ....................................1.5:1 .................... 1.8:1 Max. Duty ............................................ — .......................... 2% Max. Pulsewidth .................................. — ...................... 50 μs Grid Capacitance .............................. 40 pF ................... 60 pF Min. Harmonic Separation .............. -12 dBc .............. -10 dBc Noise Power Density (dBm/MHz) ...................................... -14 ......................... -10 Prime Power .................................... 621 W ................. 750 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 112 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 8.8 GHz – 10.5 GHz Pulse TWT භ MTI 3948 113 MTI 3948U Pulse TWT 9 GHz – 10 GHz RF Performance • • • • • • 5% Maximum Duty 7945 W Minimum Power 9.0 to 10.0 GHz -40° to 85° C 1150 W Typ. Prime Power @5% 47-48 dB Typical Gain • 15.45” L x 4” W x 3.78” H (39.2 x 10.15 x 9.6 cm) • ±15° Phase Match Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc -6.5 Vdc 2.8 A Ground Ground 185 Vpk -325 Vdc -14.2 kV 400 mApk 80 mApk 1.0 mApk 0.02 mA 2.25 Apk Ground Ground 100 Vpk -300 Vdc -13 kV Ground Ground 300 Vpk -500 Vdc -15 kV 460 mApk @ 5% 460 mApk @ 5% 30 mApk 0.5 mA 2.5 Apk 10.5 kV 7.67 kV 5.4 kV 825 mApk 740 mApk 285 mApk 74% x Ek ±2% 54% x Ek ±2% 38% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 1.1 Apk 1.0 Apk 2.4 Apk Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 9.0 8000 7945 47 9.1 8000 7945 47 9.2 8000 7945 47 9.3 8000 7945 47 9.4 8000 7945 48 9.5 8000 7945 47 9.6 8000 7945 47 9.7 8000 7945 47 9.8 8000 7945 47 9.9 8000 7945 47 10.0 8000 7945 47 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.6:1 .................... 2.0:1 Output VSWR ....................................1.4:1 .................... 2.0:1 Max. Duty ........................................... 5% ......................... 5% Max. Pulsewidth ............................... 50 μs ................. 100 μs Grid Capacitance .............................. 49 pF .................. 60 pF. Min. Harmonic Separation .............. -12 dBc .............. -10 dBc Noise Power Density (dBm/MHz) ..................................... >-14 ........................ -10 Prime Power ................................... 1150 W .............. 1500 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 114 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 9 GHz – 10 GHz Pulse TWT භ MTI 3948U 115 MEC 3104 Pulse TWT 12 GHz – 18 GHz RF Performance • • • • • • 6% Maximum Duty 3470 W Minimum Power 12.0 to 18.0 GHz -40° to 85° C 1000 W Typ. Prime Power @6% 35-39 dB Typical Gain • 14.7” L x 4” W x 4.17” H (37.2 x 10.2 x 10.6 cm) • Phase Match Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 12.0 3800 3470 35 13.0 4100 3470 35 14.0 4300 3470 37 15.0 4500 3470 39 16.0 4400 3470 37 17.0 4500 3470 35 18.0 3900 3470 35 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector Coll. #1 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.2 A -6.1 Vdc -6.5 Vdc 2.75 A Ground Ground 176 Vpk -300 Vdc -14.0 kV 375 mApk 139 mApk 2 mApk 0.5 mA 1.92 A Ground Ground 100 Vpk -200 Vdc -13.4 kV Ground Ground 300 Vpk -500 Vdc -15.4 kV 700 mApk @ 6% 700 mApk @ 6% 30 mApk 1.0 mA 2.0 Apk 10.4 kV 259 mApk (w/RF) 110 mApk (w/o RF) 520 mApk (w/RF) 54 mApk (w/o RF) 849 mApk (w/RF) 1620 mApk (w/o RF) Coll. #2 8.3 kV Coll. #3 6.17 kV Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 74% x Ek ±2% 410 mApk 59% x Ek ±2% 700 mApk 44% x Ek ±2% 1800 mApk Performance Typical Spec Input VSWR .......................................2.0:1 .................... 2.5:1 Output VSWR ....................................1.6:1 .................... 2.0:1 Max. Duty ............................................ — .......................... 6% Max. Pulsewidth .................................. — ...................... 50 μs Grid Capacitance .............................. 58 pF ................... 60 pF Noise Power Density (dBm/MHz) ...................................... -10 ............................ 5 Prime Power ................................... 1000 W .............. 1800 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 116 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 12 GHz – 18 GHz Pulse TWT භ MEC 3104 117 MTI 3056C Pulse TWT 15.0 GHz – 17.0 GHz RF Performance • • • • • • 2% Maximum Duty 3800 W Minimum Power 15.0 to 17.0 GHz -40° to 85° C 492 W Typ. Prime Power @2% 50-56 dB Typical Gain • 16.78” L x 3.03” W x 3.0” H (42.6 x 7.7 x 7.62 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2A -6.0 Vdc -6.6 Vdc 3.0 A Ground Ground 235 Vpk -250 Vdc -13.5 kV Ground 400 mApk 150 mApk 2 mApk 0.005 mA 1.65 Apk 1.1 Apk Ground Ground 130 Vpk -250 Vdc -13 kV Ground Ground Ground 300 Vpk -500 Vdc -13.75 kV Ground 500 mApk @ 2% 500 mApk @ 2% 30 mApk 0.1 mA 3.0 Apk 1.6 Apk Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 15.00 3800 3800* 50 15.25 3850 3800 52 15.50 3900 3800 50 15.75 4075 4000 51 16.00 4175 4000 50 16.25 4200 4000 53 16.50 4250 4000 54 16.75 4300 4000 55 17.00 4400 4000 56 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR .......................................1.8:1 ....................... 2:1 Output VSWR ....................................1.8:1 ....................... 2:1 Max. Duty ............................................ — .......................... 2% Max. Pulsewidth .................................. — .................... 100 μs Grid Capacitance .............................. 35 pF ................... 50 pF Min. Harmonic Separation .............. -20 dBc ............ -15 dBc* Noise Power Density (dBm/MHz) ...................................... -13 ......................... -10 Prime Power .................................... 492 W ................. 500 W * Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 118 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15.0 GHz – 17.0 GHz Pulse TWT භ MTI 3056C 119 MEC 3116X Pulse TWT 15.0 GHz – 18.0 GHz RF Performance • 4.5% Maximum Duty • 2500 Wpk Typical Minimum Power • 15 to 18 GHz • -40° to 85° C • 415 W Typ. Prime Power • 50 μS PW Max • 44 dB Typical Sat. Gain • 15.85” L x 1.98” W x 2.95” H (40.3 x 5.0 x 7.5 cm) Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Sat. Power (dB) 15.0 2200 1250 43 15.5 2300 1250 44 16.0 2450 1250 43 16.5 2500 1250 43 17.0 2500 1250 43 17.5 2400 1250 44 18.0 2400 1250 43 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Performance Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 2.0 A -6.1 Vdc -6.5 Vdc 2.5 A Ground Ground 150 Vpk -200 Vdc -10.7 kV 270 mApk 45 mApk 2.0 mApk 0.0 mA 1.5 Apk Ground Ground 125 Vpk -125 Vdc -10.3 kV Ground Ground 250 Vpk -250 Vdc -11.5 kV 450 mApk 450 mApk 250 mApk 1 mA 1.8 Apk 6.21 kV 1.25 Apk 58% x Ek ±2% Typical Spec Input VSWR: ......................................1.5:1 .................... 2.0:1 Output VSWR………………………….1.7:1 .................... 2.5:1 Max. Duty............................. ............4.5%....................4.5% Max. Pulsewidth ............................... 50 μs ................... 50 μs Grid Capacitance .............................. 55 pF .......... 65 pF max. Noise Power Density (dBm/MHz) .......................................... -3 ............................ -0 Prime Power ................................... ..415 W ................ 525 W 1.55 Apk Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 120 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15.0 GHz – 18.0 GHz Pulse TWT Ɣ MEC 3116X 121 MEC 3117X Pulse TWT 15.2 GHz – 18.2 GHz • • • • • • • • • • RF Performance 35% Maximum Duty 350/400 Wpk Minimum Power 15.2 to 18.2 GHz Output Power Flatness 1.0 dB -55° to 85° C 385 Wpk Typ. Prime Power @35% 300 μS PW Max 34 dB Typical Rated Gain 9.21” L x 1.16” W x 1.73” H (23.4 x 2.95 x 4.4 cm) Weight 2 lbs. Max Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 15.2 410 350 34 15.5 410 350 34 16.0 410 400 34 16.5 430 400 34 17.0 440 400 34 17.5 450 400 34 18.0 450 350 35 18.2 440 350 35 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.85 A -5.9 Vdc -6.6 Vdc 1.50 A Ground Ground 150 Vpk -250 Vdc -7.3 kV 15 mApk 6 mApk 0.0 mApk 0.0 mA 304 mApk Ground Ground 100 Vpk -200 Vdc -7.3 kV Ground Ground 220 Vpk -300 Vdc -7.9 kV 23 mApk @ 35% 23 mApk @ 35% 6 mApk 1 mA 350 mApk 5.91 kV 3.41 Kv 1.90 kV 52 mApk 147 mApk 90 mApk 81% x Ek ±2% 46.7% x Ek ±2% 26% x Ek ±2% Freq (GHz) 100 mApk 175 mApk 350 mApk Performance Typical Spec Input VSWR: ......................................1.3:1 .................... 1.6:1 Output VSWR ....................................1.6:1 .................... 2.0:1 Max. Duty .......................................... 35% ...................... 35% Max. Pulsewidth .............................. 300 μs ................ 300 μs Grid Capacitance .............................. 50 pF .......... 50 pF max. Noise Power Density (dBm/MHz) ...................................... -20 ......................... -10 Prime Power ................................... 1250 W .............. 1700 W Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 122 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15.2 GHz – 18.2 GHz Pulse TWT Ɣ MEC 3117X 123 MEC 3333 Fast Warm-Up TWT 15.5 GHz – 16.5 GHz • • • • • • • • • • RF Performance with Solid State Amplifier 33% Maximum Duty 850 Wpk Minimum Power 15.5 to 16.5 GHz Output Power Flatness 0.5 dB 820 W Typ. Prime Power @33% -40 dBm/MHz Typ. Noise Power Density 46 dB Typical Rated Gain 9.84” L x 3.41” W x 2.75” H (23.9 x 8.66 x 7 cm) Weight 3.3 lbs. Max. -40° to 85° C Typical Operating Conditions Element Voltage Heater (Normal) Heater (FWU) Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 15.5 880 850 Typ. Gain @ Spec. Power (dB) 46 15.6 890 850 46 15.7 900 850 46 15.8 920 850 47 15.9 950 850 47 16.0 975 850 46 16.1 980 850 47 16.2 940 850 48 16.3 925 850 46 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. 16.4 900 850 46 -5.2 Vdc -10.5 Vdc 1.67 A 6.0 A -4.8 Vdc -10.0 Vdc -5.2 Vdc -12.0 Vdc 2.0 A 7.0 A 16.5 880 850 46 Ground Ground 200 Vpk -250 Vdc -12.05 kV 13 mApk 7 mApk 4.0 mApk 0.0 mA 414 mApk Ground Ground 120 Vpk -250 Vdc 11.5 kV Ground Ground 220 Vpk -350 Vdc -12.5 kV 25 mApk @ 33% 15 mApk @ 33% 20 mApk 1 mA 485 mApk 7.11 kV 4.94 kV 83 mApk 318 mApk 59% x Ek ±2% 41% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Control Grid voltages are measured with respect to Cathode. 120 mApk 440 mApk Typical power output is shown to illustrate capability. Typical gain shown is without equalizer and using an SSA. Performance Typical Spec Input VSWR: ......................................1.4:1 .................... 2.0:1 Output VSWR ....................................1.5:1 .................... 2.0:1 Max. Duty .......................................... 33% ...................... 33% Max. Pulsewidth ............................... 50 μs ................... 20 μs Grid Capacitance .............................. 25 pF .......... 50 pF max. Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power .................................... 820 W ................. 860 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 124 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15.5 GHz – 16.5 GHz Fast Warm-Up TWT Ɣ MEC 3333 125 MEC 3086 Pulse TWT 15.50 GHz – 17.90 GHz RF Performance • • • • • 40% Duty Cycle 700 W Minimum Power 15.50 to 17.90 GHz -40° to 85° C 45-48 dB Typical Gain • 19.8” L x 3.9” W x 3.4” H (50.3 x 9.9 x 8.6 cm) • ±20° Phase Match Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 15.50 710 700 45 16.10 725 700 47 16.70 725 700 48 17.30 725 700 47 17.90 710 700 47 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid Drive Grid Bias Off Cathode (Ek) Collector Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.70 A -5.8 Vdc -6.6 Vdc 2.5 A Ground Ground 195 Vpk -350 Vdc -12.2 kV 7.0 mApk 3.3 mApk 0 mApk 0 mA 416 mApk Ground Ground 150 Vpk -300 Vdc -12 kV Ground Ground 275 Vpk -500 Vdc -13 kV 20 mApk 20 mApk 20 mApk 1.0 mA 480 mApk 7.2 kV 85.0 mApk (w/RF) 6.0 mApk(w/o RF) 324 mApk (w/RF) 406 mApk(w/o RF) 5.0 kV 59% x Ek ±2% 200 mApk 41% x Ek ±2% 480 mApk Typical Spec Input VSWR ......................................1.90:1 ................... 2.0:1 Output VSWR ...................................1.47:1 ................... 2.0:1 Duty Cycle ......................................... 40% ...................... 40% Noise Power Density (dBm/MHz) .................................... >-105 ..................... -105 Spurious ........................................ >-50 dBc ............. -50 dBc Prime Power .................................... 938 W ............... 1200 W Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 126 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 15.50 GHz – 17.90 GHz Pulse TWT භ MEC 3086 127 This page intentionally left blank 128 Communication TWTs Page No. Model Frequency Band Power (W) Duty (%) Max. Typical Gain (dB) Min/Max @ Rated Pout Efficiency (%) Typical Modulation (Control Electrode) Output Connection Weight (lbs/kg) (NTE) 130 MEC 5417 5.85 - 6.45 282** 100 39/41 19 GRID WRD 580 8.5/3.9 132 MEC 5337 C/Ku 350/400 100 38/52 27 GRID WRD 580 8.5/3.9 134 MTG 5336B C/Ku 325/325 100 38/52 27 FE WRD 580 8.5/3.9 136 MTG 5336AX C/Ku 400/400 100 38/52 30 FE WRD 580 8.5/3.9 MTG 5333 C/X/Ku 325/400/325 100 37/46/48 27 GRID WRD 580 8.5/3.9 MTG 5336 C/X/Ku 325/400/325 100 37/46/48 27 FE WRD 580 8.5/3.9 140 MEC 5599 C/X/Ku 112/158/91 100 41/41/40 28 FE WRD 580 4.5/2.0 142 MTG 5338X C/X/Ku 350/600/350 100 37/46/48 35* FE WRD 580 8.5/3.9 144 MEC 5450X 7.9-8.4 600 100 46 35 FE CMR 112 8.5/3.9 146 MEC 5499/A 13.75 - 14.5 200 100 53/55 32** FE WR 75 8.5/3.9 148 MEC 5517 13.75 - 14.5 295 100 48/50 34 FE WR 75 4.5/2.0 150 MEC 5516 X and Ku 125 100 51/53 24 FE WRDG 650 5.5/2.5 MEC 5441 Ku/DBS 350/300 100 43/51 29* GRID WR 62 7.5/3.4 MEC 5442 Ku/DBS 350/300 100 43/51 29* FE WR 62 7.5/3.4 MEC 5452 13.75 - 14.5 500 100 60 40 FE WR 75 8.5/3.9 MEC 5455 13.75 - 14.5 500 100 60 40 GRID WR 75 8.5/3.9 156 MEC 5466 17.3 - 18.4 450/500 100 45/47 32* FE WR 62 9.0/4.1 158 MEC 5530L 27.0 - 30.0 250 100 37/40 25 FE WR 28 7.0/3.2 160 MEC 5495 27.0 - 31.0 120 100 34 17** FE WR 28 7.0/3.2 162 MEC 5530H 30.0 - 31.0 250 100 36/37 25 FE WR 28 7.0/3.2 164 MEC 5523 43.5 - 45.5 125 100 30/33 23 FE WR 22 7.0/3.2 138 152 154 * Over majority of frequency range - Performance may be reduced at band edges. ** With <-26 dBc QPSK spectral regrowth @ mid-band. Note: RF input components may be integrated with the TWT at TELEDYNE to improve system gain and phase variation performance. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 129 MEC 5417 Communication TWT 5.85 GHz – 6.45 GHz RF Performance • • • • • 282 W Minimum Power 5.85 to 6.45 GHz -40° to 85° C 1459 W Typ. Prime Power 39-41 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) Typ. Sat. Power Output (W) Min. Linear Power Output (W)*** Typ. Gain @ Spec. Power (dB) 5.85 445 282* 41 6.15 445 282** 41 6.45 445 282 39 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Performance Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6 Vdc 1.6 A -5.0 Vdc -6.5 Vdc 3A Ground Ground 200 Vdc -250 Vdc -10.7 kV 5 mA 1 mA 0.5 mA 0.1 mA 300 mA Ground Ground 100 Vdc -250 Vdc -10 kV Ground Ground 250 Vdc -500 Vdc -11 kV 10 mA 10 mA 5 mA 1 mA 325 mA 5.99 kV 4.28 kV 75 mA 220 mA 56% x Ek ±2% 40% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. Currents measured at linear power output. Collector voltage optimized for linear performance. Helix current will exceed max if TWT driven to saturation. 150 mA 325 mA Typical Spec Input VSWR .......................................2.4:1 .................... 2.5:1 Output VSWR ....................................2.4:1 .................... 2.5:1 Third Order Intercept ...................... 61 dBm ...................... — Grid Capacitance .............................. 37 pF ................... 65 pF Min. Harmonic Separation .............. -15 dBc ............ -10 dBc* Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power .................................. 1459 W** .......... 1500 W** * Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. ** Prime power applies to the minimum linear power output at the indicated frequency. *** Spectral regrowth (QPSK modulation) measured at one symbol rate shall be no greater than -26 dBc. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 130 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 5.85 GHz – 6.45 GHz Communication TWT භ MEC 5417 131 MEC 5337 Communication TWT Dual Band RF Performance • • • • • 350 W Minimum Power Dual Band -40° to 85° C 1412 W Typ. Prime Power 38/52 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 6.150 6.650 375 375 375 350* 350 350 38 38 38 13.750 420 400** 52 14.000 420 400 52 14.250 420 400 52 14.500 420 400 52 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. */** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6 Vdc 1.62 A -5.6 Vdc -6.6 Vdc 2.5 A Ground Ground 200 Vdc -250 Vdc -10.5 kV 5 mA 0.6 mA 1 mA 0.1 mA 300 mA Ground Ground 125 Vdc -250 Vdc -10 kV Ground Ground 250 Vdc -500 Vdc -10.8 kV 10 mA 10 mA 5 mA 1 mA 310 mA 5.88 kV 4.2 kV 60 mA 235 mA 56% x Ek ±2% 40% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Grid voltages are measured with respect to Cathode. 150 mA 310 mA Spectral Regrowth Freq (GHz) 5.85 6.425 Min. Linear Power (W) 225 225 13.75 14.5 125 125 QPSK QPSK Level @1 Symbol Rate -26 dBc -26 dBc QPSK QPSK -26 dBc -26 dBc Modulation Performance Typical Spec Input VSWR .......................................1.8:1 ....................... 2:1 Output VSWR ....................................2.3:1 .................... 2.5:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation ............ -5/-20 dBc ... -3*/-15** dBc Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power ................................... 1412 W .............. 1450 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 132 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Dual Band Communication TWT භ MEC 5337 133 MTG 5336B Communication TWT Dual Band RF Performance • • • • • 325 W Minimum Power Dual Band -40° to 85° C 1412 W Typ. Prime Power 38/52 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6 Vdc 1.62 A -5.6 Vdc -6.6 Vdc 2.5 A Ground Ground -40 Vdc -1300 Vdc -10.75 kV 5 mA 0.6 mA 0.1 mA 0.1 mA 290 mA Ground Ground 0 -1300 Vdc -10 kV Ground Ground -75 Vdc -1500 Vdc -10.8 kV 10 mA 10 mA 1 mA 1 mA 300 mA 6.02 kV 4.3 kV 80 mA 202 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 6.000 6.425 6.650 375 375 375 375 325* 325 325 325 38 38 38 38 13.750 420 325 52 14.000 420 325** 52 14.250 420 325 52 14.500 420 325 52 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. */** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. Current 56% x Ek ±2% 40% x Ek ±2% Freq (GHz) 150 mA 300 mA Spectral Regrowth Freq (GHz) 5.85 6.425 Min. Linear Power (W) 225 225 13.75 14.5 125 125 QPSK QPSK Level @1 Symbol Rate -26 dBc -26 dBc QPSK QPSK -26 dBc -26 dBc Modulation Performance Typical Spec Input VSWR .......................................2.3:1 .................... 2.5:1 Output VSWR ....................................2.0:1 .................... 2.3:1 Max. Duty ............................................ — ......................... CW Grid Capacitance .............................. 50 pF ................... 65 pF Min. Harmonic Separation ............ -5/-20 dBc ... -3*/-15** dBc Noise Power Density (dBm/MHz) ....... -12 ......................... -10 Prime Power ................................... 1412 W .............. 1450 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 134 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Dual Band Communication TWT භ MTG 5336B 135 MTG 5336AX Communication TWT Dual Band RF Performance • • • • • 400 W Minimum Power Dual Band -40° to 85° C 1465 W Typ. Prime Power 38/52 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.3 x 7.7 x 8.6 cm) • Phase Match Available Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 425 400* 38 6.250 425 400 38 6.650 425 400 38 13.750 420 400** 52 14.250 420 400 52 14.500 420 400 52 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. */** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. -6 Vdc 1.3 A -5.6 Vdc -6.6 Vdc 2A Performance Ground Ground -6 Vdc -1600 Vdc -10.8 kV 6 mA 1 mA 0.1 mA 0.1 mA 300 mA Ground Ground 0 -1600 Vdc -9.6 kV Ground Ground -10 Vdc -1800 Vdc -11.4 kV 10 mA 10 mA 1 mA 1 mA 340 mA 6.05 kV 4.32 kV 70 mA 224 mA Input VSWR .......................................2.0:1 .................. 2.25:1 Output VSWR ....................................2.2:1 .................... 2.3:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation (dBc) ...... -5/-20 ...............-3*/-15** Noise Power Density (dBm/MHz) ...................................... -14 ......................... -12 Prime Power ................................... 1465 W .............. 1550 W Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) 56% x Ek ±2% 40% x Ek ±2% 125 mA 330 mA Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 136 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Dual Band Communication TWT භ MTG 5336AX 137 MTG 5333/MTG 5336 Communication TWT Tri-Band RF Performance • • • • • 325 W Minimum Power Tri-Band -40° to 85° C 1412 W Typ. Prime Power 37/46/48 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available 5333 – Grid 5336 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -5.8 Vdc Ground Ground -6 Vdc -1300 Vdc 200 Vdc -250 Vdc -10.65 kV 1.62 A 8 mA 0.6 mA 0.1 mA 0.1 mA 1 mA 0.1 mA 300 mA -5.6 Vdc Ground Ground 0 -1300 Vdc 125 Vdc -250 Vdc -10 kV 2.5 A 10 mA 10 mA 1 mA 1 mA 5 mA 1 mA 300 mA 5.96 kV 4.26 kV 80 mA 202 mA -6.6 Vdc Ground Ground -10 Vdc -1500 Vdc 250 Vdc -500 Vdc -10.8 kV 56% x Ek ±2% 40% x Ek ±2% 150 mA 300 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 6.000 6.425 375 375 375 325* 325 325 37 37 37 7.900 8.200 8.400 450 450 450 400** 400 400 46 46 46 14.000 375 325*** 48 14.250 375 325 48 14.500 375 325 48 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. */**/*** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. Spectral Regrowth Freq (GHz) 7.9 8.4 Min. Linear Power (W) 250 250 Modulation QPSK QPSK Level @1 Symbol Rate -30 dBc -30 dBc Performance Typical Spec Input VSWR .......................................2.3:1 .................... 2.5:1 Output VSWR ....................................1.8:1 ....................... 2:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation (dBc) .... -5/-8/-20 .... -3*/-5**/-15*** Noise Power Density (dBm/MHz) ...................................... -12 ......................... -10 Prime Power ................................... 1412 W .............. 1450 W Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 138 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Tri-Band Communication TWT භ MTG 5333/MTG 5336 139 MEC 5599 Communication TWT Tri-Band RF Performance • • • • • 91 W Minimum Power Tri-Band -40° to 85° C 640 W Typ. Prime Power 41/41/40 dB Typical Gain • 12” L x 2.1” W x 2.8” H (30.6 x 5.33 x 7.1 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.0 Vdc Ground Ground -6 Vdc -1400 Vdc -5.0 kV 1.3 A 15 mA 5 mA 0.1 mA 0.5 mA 220 mA -5.9 Vdc Ground Ground 0 -1400 Vdc -4.6 kV 1.5 A 22 mA 22 mA 1 mA 1 mA 220 mA 4.0 kV 2.0 kV 65 mA 140 mA -6.7 Vdc Ground Ground -10 Vdc -1600 Vdc -5.5 kV 80% x Ek ±2% 40% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. */**/*** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. This model number is subject to the jurisdiction of the U.S. Department of Commerce. 100 mA 220 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 6.000 6.425 130 140 160 112* 112 112 41 41 41 7.900 8.200 8.400 199 190 181 158** 158 158 41 41 41 14.000 95 91*** 40 14.250 95 91 40 14.500 100 91 40 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Requires independent (Ek) in each band. Spectral Regrowth Freq (GHz) 5.85 6.425 Min. Linear Power (W) 42 50 QPSK QPSK Level @1 Symbol Rate -26 dBc -26 dBc 7.9 8.4 43 32 QPSK QPSK -30 dBc -30 dBc 13.75 14.5 45 44 QPSK QPSK -26 dBc -26 dBc Modulation Performance Typical Spec Input VSWR ......................................2.95:1 ................... 3.0:1 Output VSWR ....................................2.1:1 .................... 2.3:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 46 pF ................... 65 pF Min. Harmonic Separation (dBc) ... -5/-10/-20 ... -3*/-8**/-12*** Noise Power Density (dBm/MHz) ....... -19 ......................... -17 Prime Power .................................... 640 W ................. 660 W Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 140 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Tri-Band Communication TWT භ MEC 5599 141 MTG 5338X Communication TWT Tri-Band RF Performance • • • • • 350 W Minimum Power Tri-Band -40° to 85° C 1700 W Typ. Prime Power 37/46/48 dB Typical Gain • 19.8” L x 3.9” W x 3.4” H (50.34 x 9.9 x 8.64 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 5.850 6.000 6.425 400 400 400 350* 350 350 37 37 37 7.900 8.200 8.400 640 635 630 600** 600 600 46 46 46 14.000 400 350*** 48 14.250 400 350 48 14.500 400 350 48 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Requires independent (Ek) in each band. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -5.8 Vdc Ground Ground -6 Vdc -1300 Vdc -10.95 kV 1.62 A 4 mA 1 mA 0.1 mA 0.1 mA 340 mA -5.8 Vdc Ground Ground 0 -1300 Vdc -10.1 kV 2A 10 mA 10 mA 1 mA 1 mA 340 mA Freq (GHz) 5.85 6.425 Min. Linear Power (W) 280 280 7.9 8.4 6.68 kV 4.38 kV 80 mA 256 mA 125 mA 340 mA 13.75 14.5 -6.8 Vdc Ground Ground -10 Vdc -1500 Vdc -11.1 kV 61% x Ek ±2% 40% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. */**/*** Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Spectral Regrowth QPSK QPSK Level @1 Symbol Rate -26 dBc -26 dBc 380 380 QPSK QPSK -30 dBc -30 dBc 125 125 QPSK QPSK -26 dBc -26 dBc Modulation Performance Typical Spec Input VSWR .......................................2.3:1 .................... 2.5:1 Output VSWR ....................................1.8:1 .................... 2.0:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation (dBc) .... -5/-8/-20 .... -3*/-5**/-15*** Noise Power Density (dBm/MHz) ....... -14 ......................... -12 Prime Power ................................... 1700 W .............. 1750 W Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 142 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Tri-Band Communication TWT භ MTG 5338X 143 MEC 5450X Communication TWT 7.9 GHz – 8.4 GHz RF Performance Freq (GHz) • • • • • 600 W Minimum Power 7.9 to 8.4 GHz -40° to 85° C 1700 W Typ. Prime Power 46 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 7.900 630 600 46 8.200 630 600 46 8.400 630 600 46 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Spectral Regrowth Freq (GHz) 7.9 8.4 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -5.8 Vdc 1.62 A -6.0 Vdc -6.6 Vdc 2A Ground Ground -6 Vdc -1300 Vdc -10.95 kV 2 mA 1 mA 0.1 mA 0.1 mA 340 mA Ground Ground 0 -1600 Vdc -10.5 kV Ground Ground -10 Vdc -1500 Vdc -11.1 kV 10 mA 10 mA 1 mA 0.2 mA 340 mA 6.68 kV 4.38 kV 80 mA 258 mA 61% x Ek ±2% 40% x Ek ±2% 125 mA 340 mA Min. Linear Power (W) 380 380 Modulation OQPSK OQPSK Level @1 Symbol Rate -30 dBc -30 dBc Performance Typical Spec Input VSWR .......................................1.6:1 .................... 2.0:1 Output VSWR ....................................1.8:1 .................... 2.0:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation .............. -20 dBc .............. -15 dBc Noise Power Density (dBm/MHz) ...................................... -16 ......................... -14 Prime Power ................................... 1700 W .............. 1750 W Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 144 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 7.9 GHz – 8.4 GHz Communication TWT භ MEC 5450X 145 MEC 5499/MEC 5499A Communication TWT 13.75 GHz – 14.5 GHz RF Performance Freq (GHz) • • • • • 200 W Minimum Power 13.75 to 14.5 GHz -30° to 75° C 615 W Typ. Prime Power 53-55 dB Typical Gain • 12.05” L x 2.1” W x 2.45” H (30.6 x 5.33 x 6.22 cm) • Phase Match Available Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 13.75 210 200 55 14.0 210 200 55 14.1 210 200 54 14.2 210 200 54 14.3 210 200 53 14.4 210 200 53 14.5 210 200 53 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Spectral Regrowth Typical Operating Conditions Element Voltage Heater Helix with RF without RF Cathode (Ek) Collector 1 w/RF w/o RF Collector 2 w/RF w/o RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.3 A -6.0 Vdc -6.6 Vdc 1.5 A Ground Ground -6.4 kV 6 mA 2 mA 235 mA Ground Ground -5.2 kV Ground Ground -6.5 kV 12 mA 12 mA 300 mA 3.1 kV 3.1 kV 150 mA 34 mA 48% x Ek ±2% 48% x Ek ±2% 165 mA 165 mA 1.47 kV 1.47 kV 80 mA 195 mA 23% x Ek ±2% 23% x Ek ±2% 290 mA 290 mA Freq (GHz) 13.75 14.5 Min. Linear Power (W) 90 90 Modulation QPSK QPSK Level @1 Symbol Rate -26 dBc -26 dBc Performance Typical Spec Input VSWR .......................................1.3:1 .................... 1.6:1 Output VSWR ....................................1.4:1 .................... 1.6:1 Max. Duty ............................................ — ......................... CW Noise Power Density (dBm/MHz) ...................................... -30 ......................... -26 Prime Power .................................... 615 W ................. 649 W Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 146 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 13.75 GHz – 14.5 GHz Communication TWT භ MEC 5499/MEC 5499A 147 MEC 5517 Communication TWT 13.75 to 14.5 GHz RF Performance • 530 Wpk Saturated Power • 295 W CW Minimum Power • 265 W Linear Power Minimum (Linearized) • 13.75 to 14.5 GHz • -40° to 85° C • 860 W Typical Prime Power • 50 dB Typical Gain @ CW • 13.4” L x 2.78” W x 2.86” H (34 x 7.0 x 7.26 cm) • Weight 4.5 lbs. Freq (GHz) Typical CW Power Output (W) Min. Spec. CW Power Output (W) Typ. Gain @ Spec. Power (dB) 13.75 338 295 50 13.90 325 295 50 14.00 325 295 50 14.25 305 295 49 14.5 315 295 48 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On* Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Coll. #3 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 1.36 A -5.8 Vdc -6.6 Vdc 1.5 A Ground Ground -6.3 Vdc -9.4 kV 6.0 mA 2.0 mA 0.1 mA 303 mA Ground Ground @ Heater -9.0kV Ground Ground @ Heater -10.5 kV 10 mA 10 mA 3 mA 315 mA 4.03 kV 3.45 kV 1.34 kV 37.0 mA 142.0 mA 118.0 mA 42.9% x Ek ±2% 36.7% x Ek ±2% 14.3% x Ek ±2% Typical Spec Input VSWR: ......................................1.6:1 .................... 2.0:1 Output VSWR ....................................1.7:1 .................... 2.0:1 Max. Duty ............................................. - .......................... CW FE Capacitance ................................ 50 pF .................. 65 pF Noise Power Density (dBm/MHz) ...................................... -25 ......................... -21 Prime Power @ Linear .................... 860 W ................. 930 W 90 mA 185 mA 320 mA *FE tied to heater internally for bias Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 148 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 13.75 GHz – 14.5 GHz Communication TWT Ɣ MEC 5517 149 MEC 5516 Communication TWT Dual Band RF Performance • 400 W Peak Minimum Power • 125 W CW Minimum Power • 100W Linear Minimum Power Non-Linearized • X and Ku Bands for Satcom • -40° to 85° C • 800 W Typ. Prime Power @52.0 dBm • 51 dB Typical Gain • 15.0” L x 2.6” W x 2.25” H (38.1 x 6.6 x 5.7 cm) . Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On* Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. -6 Vdc 1.26 A -5.8 Vdc -6.3 Vdc Ground Ground -6 Vdc -10.65 kV 3.8 mA 1.0 mA 0.1 mA 302 mA Ground Ground @ Heater -8kV Ground Ground @ Heater -12 kV 4.69 kV 1.70 kV 68.6 mA 229.6 mA 44% x Ek ±2% 16% x Ek ±2% * FE tied to heater internally for bias Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. Current Max. 2A 10 mA 10 mA 1 mA 315 mA 75 mA 305 mA Freq (GHz) Typ. CW. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 7.9 8.0 8.15 8.4 170 175 185 180 125 125 125 125 51 51 51 51 13.750 200 125 53 14.000 180 125 53 14.250 180 125 53 14.500 175 125 53 Typical power output is shown to illustrate capability. Typical gain shown is with equalizer. Spectral Regrowth Freq (GHz) 7.9 8.4 Min. Linear Power (W) 100 100 13.75 14.5 100 100 QPSK QPSK Level @1 Symbol Rate -30 dBc -30 dBc QPSK QPSK -30 dBc -30 dBc Modulation Performance Typical Spec Input VSWR ......................................1.75:1 ................... 2.5:1 Output VSWR ...................................1.95:1 ................... 2.0:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation at 125W ......................................... -20 dBc ............... -15dBc Noise Power Density (dBm/MHz) ....... -23 ......................... -19 Prime Power @ 52.0dBm ................ 760 W ................. 800 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 150 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Dual Band Communication TWT Ɣ MEC 5516 151 MEC 5441/MEC 5442 Communication TWT Ku/DBS Band RF Performance Freq (GHz) • • • • • 300 W Minimum Power Ku/DBS Band -40° to 85° C 1299 W Typ. Prime Power 43-51 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.34 x 7.67 x 8.64 cm) • Phase Match Available 14.0 14.1 14.2 14.3 14.4 14.5 5441 – Grid 5442 – Focus Electrode (FE) Typical Operating Conditions Element Voltage Heater (MEC 5441) Heater (MEC 5442) Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Coll. #1 w/RF Coll. #2 w/RF Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.1 Vdc -6.1 Vdc 1.6 A 1.6 A -5.8 Vdc -5.6 Vdc 2.5 A 2.0 A Ground Ground -25 Vdc -1300 Vdc 174 Vdc -250 Vdc -10.2 kV 5.71 kV 4.08 kV 2.3 mA 1.0 mA 0.3 mA 0.02 mA 0.5 mA 0.5 mA 295 mA 38 mA 255 mA Ground Ground Ground Ground 0 -75 Vdc -1300 Vdc -1500 Vdc 125 Vdc 250 Vdc -250 Vdc -500 Vdc -10 kV -10.8 kV 56% x Ek ±2% 40% x Ek ±2% -6.6 Vdc -6.6 Vdc Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. 10 mA 10 mA 1 mA 1 mA 5 mA 1 mA 300 mA 100 mA 300 mA Typ. Sat. Power Output (W) 400 400 400 400 400 400 Min. Spec. Power Output (W) 350* 350 350 350 350 350 Typ. Gain @ Spec. Power (dB) 51 51 51 51 50 50 17.3 400 300 46 17.4 400 300 46 17.5 400 300 46 17.6 400 300 46 17.7 400 300 46 17.8 400 300 46 17.9 390 300 45 18.0 380 300 45 18.1 360 300 44 18.2 355 300 43 18.3 340 300 43 18.4 330 300 43 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. * Minimum harmonic separation applies to the minimum specified power output at the indicated frequency. Performance Typical Spec Input VSWR .......................................1.7:1 .................... 2.5:1 Output VSWR ..................................... 2:1 ...................... 2.5:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation .............. -30 dBc ............ -15* dBc Noise Power Density (dBm/MHz) .................................... -13.9 ......................... -5 Prime Power ................................... 1299 W .............. 1400 W Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 152 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com Ku/DBS Band Communication TWT භ MEC 5441/MEC 5442 153 MEC 5452/5455 Communication TWT 13.75 GHz – 14.5 GHz RF Performance • • • • • 500 W Minimum Power 13.75 to 14.5 GHz -40° to 85° C 1320 W Typ. Prime Power 60 dB Typical Gain • 19.8” L x 3” W x 3.4” H (50.3 x 7.9 x 8.6 cm) • Phase Match Available 5452 – Focus Electrode (FE) 5455 – Grid Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 13.75 510 500 60 14.0 510 500 60 14.1 510 500 60 14.2 520 500 60 14.3 520 500 60 14.4 520 500 60 14.5 510 500 60 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Grid On Grid Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Performance -6.3 Vdc 1.6 A -5.8 Vdc -6.6 Vdc 2.5 A Ground Ground -35 Vdc -1300 Vdc 160 Vdc -250 Vdc -10.3 kV 5 mA 0.5 mA 0.3 mA 0.05 mA 0.1 mA 0.02 mA 320 mA Ground Ground 0 -1200 Vdc 125 Vdc -250 Vdc -10 kV Ground Ground -75 Vdc -1500 Vdc 250 Vdc -500 Vdc -10.8 kV 10 mA 10 mA 1 mA 1 mA 10 mA 1 mA 320 mA Input VSWR ......................................1.38:1 ................... 1.5:1 Output VSWR ...................................1.45:1 ................... 1.7:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Grid Capacitance .............................. 37 pF ................... 50 pF Min. Harmonic Separation .............. -30 dBc .............. -15 dBc Noise Power Density (dBm/MHz) ....................................... -7 ............................ -5 Prime Power ................................... 1320 W .............. 1450 W 5.5 kV 3.4 kV 88 mA 226 mA 54% x Ek ±2% 33% x Ek ±2% Typical Spec 100 mA 320 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Grid or Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 154 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 13.75 GHz – 14.5 GHz Communication TWT භ MEC 5452/5455 155 MEC 5466 Communication TWT 17.3 GHz – 18.4 GHz RF Performance • • • • • 450 W Minimum Power 17.3 to 18.4 GHz -40° to 85° C 1555 W Typ. Prime Power 45-47 dB Typical Gain • 19.8” L x 3.9” W x 3.4” H (50.3 x 10 x 8.6 cm) • Phase Match Available Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.1 Vdc 1.7 A -5.8 Vdc -6.6 Vdc 2A Ground Ground -10 Vdc -1600 Vdc -11.8 kV 5 mA 1 mA 0.1 mA 0.1 mA 385 mA Ground Ground 0 -1600 Vdc -11.5 kV Ground Ground -50 Vdc -2000 Vdc -12.5 kV 10 mA 10 mA 1 mA 1 mA 400 mA 5.81 kV 3.20 kV 110 mA 270 mA 49% x Ek ±2% 27% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. 250 mA 375 mA Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 17.3 17.4 17.5 17.6 17.7 17.8 17.9 18.0 18.1 18.2 18.3 18.4 550 550 550 550 540 530 525 500 490 480 460 450 500 500 500 500 500 500 500 450 450 450 450 450 47 47 47 47 47 47 47 46 46 46 45 45 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Spec Input VSWR ......................................1.75:1 ................. 2.25:1 Output VSWR ...................................1.92:1 ................... 2.3:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Min. Harmonic Separation .............. -30 dBc .............. -15 dBc Noise Power Density (dBm/MHz) ...................................... -20 ......................... -15 Prime Power ................................... 1555 W .............. 1600 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 156 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 17.3 GHz – 18.4 GHz Communication TWT භ MEC 5466 157 MEC 5530L Dual Band Communication TWT 27 GHz – 30 GHz RF Performance Freq (GHz) • 502 W Peak Minimum Power • 250 W CW Minimum Power • 175 W Linear Minimum Power (Linearized) • 27.0 GHz to 30.0 GHz • -40° to 85° C • 990 W Typ. Prime Power @ 53.5dBm • 38 dB Typical Gain • 14.1” L x 2.76” W x 3.15” H (36 x 7.0 x 8.0 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Typ. CW. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 27.0 250 250 38 27.5 250 250 37 28.0 250 250 39 28.5 250 250 40 29.0 250 250 38 29.5 250 250 37 30.0 250 250 39 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.78A -5.8 Vdc -6.6 Vdc 1.5 A Ground Ground -18 Vdc -1300 Vdc -17.8 kV 1.7 mA 0.7 mA 0.1 mA 0.1 mA 185 mA Ground Ground 0 Vdc -1300 Vdc -17.2 kV Ground Ground -40 Vdc -1400 Vdc -18.2 kV 4 mA 4 mA 1 mA 0.2 mA 200 mA 8.53 kV 3.65 kV 60.4 mA 116.3 mA 49% x Ek ±2% 21% x Ek ±2% Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. 90 mA 185 mA Spectral Regrowth Freq Min. Linear (GHz) Power (W) 27.0 175 27.5 175 28.0 175 28.5 175 29.0 175 29.5 175 30.0 175 Modulation QPSK QPSK QPSK QPSK QPSK QPSK QPSK Level @1 Symbol Rate -30 dBc -30 dBc -30 dBc -30 dBc -30 dBc -30 dBc -30 dBc Performance Typical Spec Input VSWR ......................................1.45:1 ................... 2.0:1 Output VSWR ...................................1.50:1 ................... 2.0:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Noise Power Density (dBm/MHz) ....... -23 ......................... -20 Prime Power @ 53.5dBm ……………990 W ............. 1100 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledyne-mec.com 158 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledyne-mec.com 27 GHz – 30 GHz Dual Band Communication TWT Ɣ MEC 5530L 159 MEC 5495 Communication TWT 27 GHz – 31 GHz RF Performance • • • • • 120 W Maximum Power Output 27.0 to 31.0 GHz -40° to 85° C 600 W Typ. Prime Power (@120 W) 34 dB Typical Gain • 14” L x 2.76” W x 3.15” H (40.9 x 7 x 8 cm) • ±20° Phase Match Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 27.0 250 120 34 28.0 250 120 34 29.0 250 120 34 30.0 250 120 34 31.0 250 120 34 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Performance Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.7 A -5.8 Vdc -6.6 Vdc 1.5 A Ground Ground -6.3 Vdc -1200 Vdc -14.25 kV 1.5 mA 0.5 mA 0.1 mA 0.1 mA 190 mA Ground Ground 0 -1200 Vdc -13.5 kV Ground Ground -40 Vdc -1400 Vdc -14.5 kV 4 mA 4 mA 1 mA 0.2 mA 200 mA 4.42 kV 2.28 kV 10 mA 180 mA 31% x Ek ±2% 16% x Ek ±2% Typical Spec Input VSWR ......................................1.25:1 ...................... 2:1 Output VSWR ....................................1.5:1 .................. 1.75:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 60 pF Min. Harmonic Separation .............. -30 dBc .............. -15 dBc Noise Power Density (dBm/MHz) ...................................... -35 ......................... -30 Prime Power (@120 W) .................. 600 W ................. 700 W 75 mA 200 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 160 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 27 GHz – 31 GHz Communication TWT භ MEC 5495 161 MEC 5530H Dual Band Communication TWT 30 GHz – 31 GHz RF Performance • 502 W Peak Minimum Power • 250 W CW Minimum Power • 175 W Linear Minimum Power (Linearized) • 30 GHz to 31 GHz • -40° to 85° C • 970 W Typ. Prime Power @ 53.5dBm • 40 dB Typical Gain • 14.1” L x 2.76” W x 3.15” H (36 x 7.0 x 8.0 cm) Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) Typ. CW. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 30.0 250 250 40 30.5 250 250 39 31.0 250 250 40 Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. Spectral Regrowth Freq (GHz) 30.0 30.5 31.0 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. -6.3 Vdc 0.78A -5.8 Vdc -6.6 Vdc 1.5 A Ground Ground -18 Vdc -1300 Vdc -17.4 kV 1.3 mA 0.6 mA 0.1 mA 0.1 mA 178 mA Ground Ground 0 Vdc -1300 Vdc -17.2 kV Ground Ground -40 Vdc -1400 Vdc -18.2 kV 4 mA 4 mA 1 mA 0.2 mA 200 mA 8.53 kV 3.65 kV 60.4 mA 116.3 mA 49% x Ek ±2% 21% x Ek ±2% Min. Linear Power (W) 175 175 175 Modulation QPSK QPSK QPSK Level @1 Symbol Rate -30 dBc -30 dBc -30 dBc Performance Typical Spec Input VSWR ......................................1.30:1 ................... 2.0:1 Output VSWR ...................................1.30:1 ................... 2.0:1 Max. Duty ............................................ — ......................... CW FE Capacitance ................................ 50 pF ................... 65 pF Noise Power Density (dBm/MHz) ....... -23 ......................... -20 Prime Power @ 53.5dBm ……………970 W ............. 1100 W 90 mA 185 mA Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 162 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 30 GHz – 31 GHz Dual Band Communication TWT Ɣ MEC 5530H 163 MEC 5523 Communication TWT 43.5 GHz – 45.5 GHz RF Performance • • • • • 125 W Minimum Power 43.5 to 45.5 GHz -40° to 85° C 575 W Typical Prime Power 30 to 32 dB Typical Gain @ Saturation • 14.1” L x 2.76” W x 3.15” H (35.8 x 7.0 x 8.0 cm) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) Typ. Gain @ Spec. Power (dB) 43.50 140 125 33 43.75 135 125 32 44.00 145 125 32 44.25 145 125 32 44.50 145 125 32 44.75 145 125 32 45.00 135 125 31 45.25 135 125 31 45.50 132 125 30 Current Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. Typical gain shown is without equalizer. -6.3 Vdc 0.75 A -5.8 Vdc -6.6 Vdc 1.5 A Performance Ground Ground -14 Vdc -1300 Vdc -15.1 kV 1.4 mA 0.7 mA 0.1 mA 0.0 mA 152 mA Ground Ground 0 Vdc -1300 Vdc -15.1 kV Ground Ground -40 Vdc -1400 Vdc -16.1 kV 4 mA 4 mA 1 mA 0.2 mA 185 mA 4.98 kV 3.02 kV 47.8 mA 102.8 mA Input VSWR: ......................................1.9:1 .................... 2.0:1 Output VSWR ....................................1.7:1 .................... 2.0:1 Max. Duty ............................................. - .......................... CW FE Capacitance ................................ 50 pF ................... 60 pF Noise Power Density (dBm/MHz) ...................................... -26 ......................... -20 Prime Power .................................... 575 W .................. 650W Typical Operating Conditions Element Voltage Heater Helix with RF without RF FE On FE Off Cathode (Ek) Collector w/RF Coll. #1 Coll. #2 Freq (GHz) 33% x Ek ±2% 20% x Ek ±2% 90 mA 185 mA Typical Spec Cathode voltage is measured with respect to ground. Heater, Collector, and Focus Electrode (FE) voltages are measured with respect to Cathode. This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Specifications are subject to change without notice. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 164 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Published Information – Cleared for Public Release by the DoD’s Office of Security Review, Case 14-S-0142. Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 43.5 GHz – 45.5 GHz Communication TWT Ɣ MEC 5523 165 This page intentionally left blank 166 Solid State Power Amplifiers Page No. Model Frequency Band Power (W) Duty (%) Max. Typical Gain (dB) Min/Max @ Rated Pout Efficiency (%) Typical DC Voltage Input Output Connection Weight (lbs/kg) (NTE) 168 MEC 7011U 225-400 MHz 200 CW 50 20 48 N 10 170 MEC 7003S 2.7-3.5 GHz 200 20 25 30 32 SMA 3 172 MSX 100AB 9-10 GHz 1000 20 60 23 18-36 TNC 10 Teledyne TWT Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 167 MEC 7011U 200W CW SSPA 225 MHz – 400 MHz • • • • • • • • • • • RF Performance CW 100 W Minimum Power 225-400 MHz Gain Flatness +/-1.6 dB 600 W Typ. Prime Power -40 dBm/MHz Typ. Noise Power Density 53 dB Typical Rated Gain 12.5” L x 6” W x 1.5” H (317 x 150 x 3.75 cm) Weight 5 lbs. Max. -40° to 85° C Rack Mount Configurable Power Supply Requirements Voltage Min. Voltage Max. Current Max. 48Vdc 12.0 A Connectors DC Screw Terminal 50Vdc Monitor RFin RF out 9 pin Dsub SMA Type N Monitoring Options Pout, Iavg, , Gain, Temperature Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 225 120 100 Typ. Gain @ Spec. Power (dB) 53 243 125 100 53 270 135 100 53 291 230 160 53 300 230 160 53 318 230 160 53 325 150 100 53 350 150 100 53 400 125 100 53 Typical power output is shown to illustrate capability. Performance Typical Spec Input VSWR: ......................................1.4:1 .................... 2.0:1 Max. Duty ...........................................CW ....................... CW Max. Pulsewidth .................................N/A ....................... N/A Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power .................................... 500 W ................. 600 W This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Specifications are subject to change without notice. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledyne-mec.com 168 This model number is controlled by the International Traffic in Arms Regulations, and can only be exported via a U.S. Department of State export license. They may not be transferred, transshipped on a non-continuous voyage, or otherwise be disposed of in any other country, either in their original form or after being incorporated into other end-items, without the prior written approval of the U.S. Department of State. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledyne-mec.com 225 – 400 MHz 200W CW SSPA Ɣ MEC 7011U 169 MEC 7003S 200 W Pulse SSPA 2.7 GHz – 3.5 GHz • • • • • • • • • • • RF Performance 20% Maximum Duty 200 Wpk Minimum Power 2.7 to 3.5 GHz Output Power Flatness 0.5 dB 80 W Typ. Prime Power @10% -40 dBm/MHz Typ. Noise Power Density 25 dB Typical Rated Gain 9” L x 3.25” W x 1.5” H (22 x 8 x 6 cm) Weight 3 lbs. Max. -40° to 85° C Rack Mount Available Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 2.7 230 200 Typ. Gain @ Spec. Power (dB) 25 2.8 230 200 25 2.9 230 200 25 3.0 230 200 25 3.1 220 200 25 3.2 220 200 25 3.3 210 200 25 3.4 210 200 25 3.5 210 200 25 Power Supply Requirements Voltage Min. Voltage Max. Current Max. Typical power output is shown to illustrate capability. 31Vdc 3.0 A Performance RFin SMA Input VSWR: ......................................1.4:1 .................... 2.0:1 Max. Duty .......................................... 20% ...................... 20% Max. Pulsewidth .............................. 300 μs ................ 100 μs Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power ..................................... 80 W ................... 100W Connectors DC Screw Terminal 33Vdc Monitor 9 pin Dsub RF out SMA Monitoring Options Pout, Iavg, Duty Cycle, Gain, Temperature Typical Spec This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 170 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 2.7 GHz – 3.5 GHz 200 W Pulse SSPA Ɣ MEC 7003S 171 MSX 100AB 1 kW Pulse SSPA 9.0 GHz – 10.0 GHz • • • • • • • • • • • RF Performance 20% Maximum Duty 1000 Wpk Minimum Power 9.0 to 10.0 GHz Output Power Flatness 0.5 dB 500 W Typ. Prime Power @10% -40 dBm/MHz Typ. Noise Power Density 60 dB Typical Rated Gain 13” L x 8.5” W x 2.5” H (32 x 21 x 6 cm) Weight 10 lbs. Max. -40° to 85° C Rack Mount Available Power Supply Requirements Voltage Min. Voltage Max. Current Max. 18 Vdc 16 A Connectors DC Screw Terminal 36 Vdc Freq (GHz) Typ. Sat. Power Output (W) Min. Spec. Power Output (W) 9.0 1000 1000 Typ. Gain @ Spec. Power (dB) 60 9.1 1050 1000 60 9.2 1050 1000 60 9.3 1100 1000 60 9.4 1150 1000 60 9.5 1150 1000 60 9.6 1150 1000 60 9.7 1100 1000 60 9.8 1050 1000 60 9.9 1050 1000 60 10.0 1000 1000 60 Typical power output is shown to illustrate capability. Performance Monitor 9 pin Dsub RFin SMA RF out WR90/TNC Monitoring Options Pout, Iavg, Duty Cycle, Gain, Temperature Typical Spec Input VSWR: ......................................1.4:1 .................... 2.0:1 Max. Duty .......................................... 20% ...................... 20% Max. Pulsewidth .............................. 300 μs ................ 100 μs Noise Power Density (dBm/MHz) ...................................... -40 ......................... -30 Prime Power .................................... 500 W ................. 550 W This model number is subject to the jurisdiction of the U.S. Department of Commerce. Specifications are subject to change without notice. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 172 This model number is subject to the jurisdiction of the U.S. Department of Commerce. Teledyne SSPA Products • 11361 Sunrise Park Drive • Rancho Cordova, CA 95742 • 916.638.3344 • www.teledynemicrowave.com 9 GHz – 10 GHz 1kW Pulse SSPA Ɣ MSX 100AB 173 This page intentionally left blank 174 P a bu usiness unit of Teledyne T Microw wave Solutions, iss a world leaderr in the design, d development and d manufacture Telledyne TWT Products, of b broadband high power helix Travveling Wave Tub bes (TWTs), TWT T Amplifiers (TW WTAs), and Solid State High Pow wer Amplifiers (SS SPAs) from 10M MHz to 44GHz, for f top performa ance in the string gent fixed and mobile m environme ents used in tod ay’s ECM, radar and communic cations markets. Ourr state of the art products are fo ound on nearly all major EW, Rad dar, and Commu unication platforrms of the United d States and its allies thro oughout the worrld. TMS recognizes an nd strives to mee et the needs of our o customers with w quality, value e, and service att competitive priices. We look fo orward to mee eting your needss with these sam me standards of excellence. Telledyne TWT P Products Missiion Statementt We recogniize the importan nce of our emp ployee commitm ment and participation p to continually imp prove our produ ucts and service es. Above all, we will ende eavor to provide e our customers s with the highe est quality products and a services, d delivered when p promised, and tto their sp pecifications.