TECHNICAL CHARACTERISTICS 2,60 1,20 C 2 1 C 4 14,60 8 5,08 h 0,10 Ref. SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air 12,00 WASHABLE DEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed to water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. 10,00 0,54 RECOMMENDED LAYOUT MATERIAL >Cover: LCP UL 94V-0, color grey >Base: LCP UL 94V-0, color grey >Actuator: PA 66 UL 94V-0 >Contact: Gold Plated >Terminal: Gold Plated 5,08 10,00 PACKAGING INFORMATION >Tape and Reel Scale - 3:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. 10 Position ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach Projection d revised MatchCode 14-07-25 AL Washable Definition 14-03-05 DaF c In addition, even electronic component in general electronic equipments, b new contact rating 12-02-02 WJ when used in electrical circuits that require high safety, reliability functions 11-09-30 WJ a warning text or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV FILE DATE BY Part number Color of Actuator Position Code 428 521 520 810 light grey 10 Real Code 428 521 520 811 blue 10 complement code GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Drawn 09-11-05 Checked 09-11-05 DESCRIPTION WE eiCan CAD Name Jelisarow Hsu 0 1 2 3 4 5 6 7 8 9 Real Code C 1 2 4 8 0 1 2 3 4 5 6 7 8 9 Complement Code C 1 2 4 8 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 WS-ROSV Rotary Switch 10x10mm, 10 position, SMD version 3:1 Position Würth Elektronik Scale eiCan Drawing.- No. 42852152081x EDV NO 42852152081x.dft 10 Position 6,80 6,50 2,20 9,60 ±0,1 SPECIFICATION >Contact Rating: Switching: 150mA, 24VDC Non-Switching: 400mA, 24VDC >Contact Resistance: Initial: 80mOHM max. After Life Test: 200mOHM max. >Insulation Resistance: min. 100MOHM at 250VDC >Dielectric Strength: 250VAC for 1 minute >Operating Force: 700g max. >Life cycle: 10.000 steps >Position: 10 >Actuator: Cross type SIZE A4 System :Solid Edge V20