TECHNICAL CHARACTERISTICS 1 C 4 RECOMMENDED LAYOUT 10,0 MATERIAL >Cover: PA66 UL 94V-0, color light grey >Base: PA66 UL 94V-0, color black >Actuator: POM UL HB >Contact: Gold Plated >Terminal: Gold Plated SOLDERING INFORMATION >Terminal in THT version >Wave soldering at 260°C for 10 sec. max >Hand soldering at 350°C for 3 sec. max 9,8 WASHABLE DEFINITION Please do not submerse washable products into water or cleaning agents or put them in locations exposed to water or liquids completely. When cleaning by hand (brushing), please do not use excessive force on our switch to avoid malfunction afterwards, because you could deform function relevant areas or you could damage sealing functions. Do not clean washable series immediately after soldering. The cleaning agent may be absorbed into the switch through respiration while the switch cools. ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: ROHS, Reach O 9,6 ±0,1 PACKAGING INFORMATION >Tube Scale - 2:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Projection Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, b revised MatchCode 14-07-25 AL when used in electrical circuits that require high safety, reliability a Washable Definition 05-03-14 DaF functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV FILE DATE BY Part number Color of Actuator Position Code 428 427 520 910 dark grey 10 Real Code 428 427 520 911 ivory 10 Complement Code GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Name Drawn 12-03-13 Jelisarow Checked 12-03-13 Hsu DESCRIPTION WE eiCan CAD 0 1 2 3 4 5 6 7 8 9 Real Code C 1 2 4 8 0 1 2 3 4 5 6 7 8 9 Complement Code C 1 2 4 8 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 WS-ROTU 10x10mm right angle rotary Switch, 10 position, THT version 2:1 Position Würth Elektronik Scale eiCan Drawing.- No. 42842752091x EDV NO 42842752091x.dft 10 Position 10,0 SPECIFICATION >Contact Rating: Switching: 150mA, 24VDC Non-Switching: 400mA, 24VDC >Contact Resistance: Initial: 80mOHM max. After Life Test: 200mOHM max. >Insulation Resistance: min. 100MOHM at 250VDC >Dielectric Strength: 250VAC for 1 minute >Operating Force: 700g max. >Life cycle: 10.000 steps >Position: 10 >Actuator: Cross type 10 Position 0,2 2,54 0,54 5,08 O 1,00 4,6 2 0,46 2,54 C 8 6,80 2,2 5,08 SIZE A4 System :Solid Edge V20