TECHNICAL CHARACTERISTICS 1,0 2 SPECIFICATION >Rating: 20mA, 15VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 +0.05 / - 0.1mm >Bounce: 10ms max. 4 4,6 5,5 4,8 2,6 GND GND 1 MATERIAL >Cover: Copper alloy >Stem: LCP UL 94V-0 >Frame: LCP UL 94V-0, color Black >Contact: Stainless Steel with silver >Terminal: Copper alloy with silver plating >Tape: Polyimide tape 1,2 1,5 h 0,10 Ref. Grounded Terminal can be effective even if not soldered 0,8 0,05 ±0,07 0,45 P.C.B. MOUNTING PLAN O 3,4 ±0,2 O 2,0 0,10 ±0,01 3 4,8 7,2 GND 0,5 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max GND 2,5 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 4 2 6,2 ±0,2 5,0 ±0,15 GND PACKAGING INFORMATION >Tape & Reel 3 2 4 1 3 0,5 3,7 5,0 ±0,15 W 1 PN 431 181 015 816 431 151 015 826 GND Force 160g ± 50gf 260g ± 50gf Color of Stem Black White Life cycle 1.000.000 200.000 W SCHEMATIC GND Scale - 5:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection GENERAL TOLERANCE .x = +/- 0,1 .xx = +/- 0,15 14-11-04 DaF Drawn 10-07-13 Checked 10-07-13 Date f e d c b In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions a or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV remove Contact cladding revised MatchCode 14-07-24 AL Bounce 10ms max. 14-04-11 DaF warning text 11-10-28 WJ Stroke Tolerance was +/- 0,15 General Tolerance was +/- 0,2 FILE 11-08-30 WJ 11-08-26 WJ DATE BY WE eiCan CAD Name Jelisarow Hsu Basic material DESCRIPTION WS-TASV 5x5mm Tact Switch with ground terminal, SMD version 5:1 Position Würth Elektronik Scale eiCan Drawing.- No. 4311x10158x6 EDV NO 4311x10158x6.dft SIZE A4 System :Solid Edge V20