S Package 14-Lead Plastic Small Outline (Narrow .150 Inch) (Reference LTC DWG # 05-08-1610 Rev G) .337 – .344 (8.560 – 8.738) NOTE 3 .045 ±.005 .050 BSC 14 N 12 11 10 9 8 N .245 MIN .160 ±.005 .228 – .244 (5.791 – 6.197) 1 .030 ±.005 TYP 13 2 3 N/2 N/2 RECOMMENDED SOLDER PAD LAYOUT .010 – .020 × 45 (0.254 – 0.508) .008 – .010 (0.203 – 0.254) 1 2 3 4 5 .053 – .069 (1.346 – 1.752) NOTE: 1. DIMENSIONS IN .014 – .019 (0.355 – 0.483) TYP INCHES (MILLIMETERS) 2. DRAWING NOT TO SCALE 3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm) 4. PIN 1 CAN BE BEVEL EDGE OR A DIMPLE 7 .004 – .010 (0.101 – 0.254) 0° – 8° TYP .016 – .050 (0.406 – 1.270) 6 .150 – .157 (3.810 – 3.988) NOTE 3 .050 (1.270) BSC S14 REV G 0212