AEC-Q200 Qualified SMD Power Inductor Design Kits

INDUCTIVE COMPONENTS
Bourns Releases New AEC-Q200 Qualified
SMD Power Inductor Design Kits
Riverside, California - May 2, 2016 - Bourns is pleased to announce the release of six AEC-Q200
Qualified SMD Power Inductor Design Kits. They include the Model SDE-A-LAB1 non-shielded,
SRR-A-LAB1, SRR-A-LAB2, SRU-A-LAB1 shielded and SRP-A-LAB1, SRP-A-LAB2 high current
shielded inductor series.
These Design Kits contain inductors that provide engineers with a wide variety of inductances, rated
currents, sizes and features for quick-turn prototype testing. These Bourns® SMD power inductor series
are verified to meet the vigorous AEC-Q200 stress test standard for automotive electronics. They are not
only ideal for power management and EMI suppression in automotive electronics applications but also
applications for consumer electronics, telecommunication equipment, industrial electronics, medical
devices and other electronic devices where a higher quality standard is required. These inductor series
are produced and tested at TS 16949 certified manufacturing facilities.
New Kit
1
Part No.
SDE-A-LAB1
2
Footprint (mm)
4.5 x 4 to 10 x 9
Height (mm)
3.2 to 5.4
Component Series Included
SDE0403A, SDE0604A, SDE0805A, SDE1006A
SRR-A-LAB1
6.7 x 6.7 to 7.3 x 7.3
3.5 to 4.5
SRR6040A, SRR0735A, SRR0745A
3
SRR-A-LAB2
12 x 12 and 12.5 x 12.5
6 to 10
SRR1260A, SRR1280A, SRR1210A
4
SRU-A-LAB1
8 x 8 and 10 x 10
2.8 to 4.8
SRU8028A, SRU1028A, SRU1038A, SRU1048A
5
SRP-A-LAB1
4.45 x 4 and 5.7 x 5.2
1 to 2.8
SRP4012TA, SRP4020TA, SRP5015TA, SRP5030TA
6
SRP-A-LAB2
7.3 x 6.6 and 17.3 x 16.9
2.8 to 6.7
SRP7028A, SRP7050TA, SRP1770TA
Please visit the Bourns website at www.bourns.com for additional product details. Should you have any
questions or need additional information, please feel free to contact Customer Service/Inside Sales.
IC1623