CD143A SR05LC

T
PL
IA
N
M
CO
*R
oH
S
Features
Applications
■ RoHS compliant*
■ Ethernet - 10/100/1000 Base T
■ Halogen free**
■ Firewire and USB
■ ESD protection >15 kV
■ Portable electronics
■ Protects Vcc and two data lines
■ Video/graphic cards
CD143A-SR05LC - Steering/TVS Diode Array Series
General Information
The Bourns® Model CD143A-SR05LC device provides ESD, EFT and surge
protection for the external ports of portable electronic devices such as cellphones,
handheld electronics and personal computers.
GND
1
I/O
2
The ESD protection provided by the component enables a data port to withstand a
minimum ±8 KV Contact / ±15 KV Air Discharge per the ESD test method specified
in IEC 61000-4-2. The device measures 2.80 mm x 1.20 mm and is available in
a SOT-143 package intended to be mounted directly onto an FR4 printed circuit
board.The Bourns® device will meet IEC 61000-4-2 (ESD), IEC 61000-4-4(EFT)
and IEC 61000-4-5 (Surge) requirements.
4
REF
3
I/O
Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Symbol
Value
Unit
Peak Pulse Current (tp= 8/20 µs)
IPP
13
A
Operating Temperature
TJ
-55 °C to +125
°C
TSTG
-55 °C to +150
°C
Vf
1
V
Storage Temperature
Forward Voltage (If= 15 mA, Pin 1-4)
Electrical and Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Symbol
Value
Unit
Breakdown Voltage Minimum @ 2 mA 1
VBR
6.1
V
Working Peak Voltage 1
VWM
5.0
V
VC
9.0
V
VC
12.5 @ 13 A
V
ID
1.0
µA
CIN
3
pF
Clamping Voltage Maximum @ IP = 5 A 2,4
Clamping Voltage Maximum @ IPP 2,4
Leakage Current @ VWM 1
Capacitance Maximum between I/O Pins and Ground
@ VR = 0 V, f = 1 MHz 3
Notes:
1. From Pin 4 to Pin 1.
2. See Pulse Wave Form.
3. Pin 1 (GND) connected to Ground, Pin 4 (REF) connected to 5 V.
4. I/O to GND, REF connected to 5 V and GND connected to Ground.
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CD143A-SR05LC - Steering/TVS Diode Array Series
Product Dimensions
This is a molded JEDEC SOT-143 device. It has a flammability rating of UL 94V-0.
The dimensions for the packaged device are shown below.
Dimensions
A
2.80 - 3.04
(0.110 - 0.12)
B
1.78 - 2.03
(0.070 - 0.080)
C
2.11 - 2.55
(0.083 - 0.100)
D
1.2 - 1.4
(0.047 - 0.055)
E
0.35 - 0.5
(0.014 - 0.020)
F
0.76 - 0.93
(0.030 - 0.037)
G
0.08 - 0.18
(0.003 - 0.007)
H
0.46 - 0.60
(0.018 - 0.024)
I
0.84 - 1.14
(0.033 - 0.045)
J
0.72 - 0.83
(0.028 - 0.033)
K
0.013 - 0.10
(0.0005 - 0.004)
A
B
D
G
C
H
F
E
DIMENSIONS:
I
J
MM
(INCHES)
K
Recommended Pad Layout
Block Diagram
This is the footprint recommended for this SOT-143 device.
The device block diagram below includes the pin names and basic
electrical connections associated with each channel.
2.92
(0.115)
1.92
(0.076)
GND
1
I/O
2
4
REF
3
I/O
1.4
(0.055)
3.6
(0.142)
2.2
(0.087)
0.8
(0.031)
1.72
(0.068)
1.4
(0.055)
Typical Part Marking
CD143A-SR05LC ....................................................................... 5LC
1.4
(0.055)
1.00
(0.039)
0.52
(0.020)
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different
applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
CD143A-SR05LC - Steering/TVS Diode Array Series
Performance Graphs
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Pulse Wave Form
IPP – Peak Pulse Current (% of IPP)
Clamping Voltage (V)
Typical Clamping Voltage vs. Peak Pulse Current
Waveform
Parameters:
tr=8 µs
td=20 µs
I/O pin to GND pin
120
Test Waveform Parameters
tt = 8 µs
td = 20 µs
tt
100
80
et
60
40
td = t|IPP/2
20
0
0
10
5
15
20
25
30
t – Time (µs)
4
5
6
7
8
9
10
11
12
13
Peak Pulse Current (A)
Typical Capacitance vs. Reverse Voltage
Power Derating Curve
4.0
100
% of Rated Power
Input Capacitance (pF)
3.5
3.0
2.5
2.0
80
60
40
20
1.5
1.0
0
VDD = 5 V, GND = 0 V, f = 1 MHz, T = 25 ° C
0.5
0
25
50
75
100
TL – Lead Temperature (°C)
0.0
0
1
2
3
4
5
How to Order
CD 143A - SR 05 LC
Common Code
Chip Diode
Package
143A = SOT-143
Model
SR = Steering Diode Array
Workint Peak Voltage
05 = 5.0 VWM (Volts)
Capacitance
LC = Low Capacitance
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
125
150
CD143A-SR05LC - Steering/TVS Diode Array Series
Application Information
The Model CD143A-SR05LC is designed to protect two data lines
against transient overvoltage events, as well as to limit the transient
voltage on the 5 V supply line of the protected device.
Pin 1 must be connected to the local Ground used by the protected
device and Pin 4 must be connected to the 5 V supply rail used by
the protected device, as shown in the figure below. Under no
circumstances should Pins 1 and 4 be left unconnected (floating).
To optimize the performance of the protection design, connections
to the CD143A-SR05LC should be as short as possible. This will
minimize the parasitic inductance of the printed circuit board traces.
An optional 0.1 µF bypass chip capacitor can be added from Pin 4
to Ground to enhance the ESD performance of the design when the
nearest bypass capacitor is a significant distance from the Model
CD143A-SR05LC.
VCC = 5 V
4
GND
OPTIONAL LOCAL
BYPASS CAPACITOR
CD143A-SR05LC
1
2
GND
3
PROTECTED LINE #1
PROTECTED LINE #2
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
3312 - 2 mm SMD
Trimming Potentiometer
CD143A-SR05LC
- Steering/TVS
Diode Array Series
Packaging Information
The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard.
P
0
P
1
d
T
E
Index Hole
120 °
F
D2
W
A
D1 D
P
B
Trailer
.......
.......
End
C
Device
.......
.......
.......
.......
Leader
.......
.......
10 pitches (min.)
10 pitches (min.)
W1
Start
DIMENSIONS:
MM
(INCHES)
Direction of Feed
Item
Symbol
SOT-143
Carrier Width
A
2.80 ± 0.15
(0.110 ± 0.006)
Carrier Length
B
3.25 ± 0.15
(0.128 ± 0.006)
Carrier Depth
C
1.25 ± 0.15
(0.049 ± 0.006)
Sprocket Hole
d
1.50 ± 0.10
(0.059 ± 0.004)
Reel Outside Diameter
D
178 ± 2
(7.008 ± 0.079)
Reel Inner Diameter
D1
Feed Hole Diameter
D2
13.0 ± 0.20
(0.512 ± 0.008)
Sprocket Hole Position
E
1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position
F
3.50 ± 0.10
(0.138 ± 0.004)
Punch Hole Pitch
P
4.00 ± 0.10
(0.157 ± 0.004)
Sprocket Hole Pitch
P0
4.00 ± 0.20
(0.157 ± 0.008)
Embossment Center
P1
2.00 ± 0.10
(0.079 ± 0.004)
Overall Tape Thickness
T
0.20 ± 0.10
(0.008 ± 0.004)
Tape Width
W
8.00 ± 0.20
(0.315 ± 0.008)
Reel Width
W1
Quantity per Reel
--
50.0
MIN.
(1.969)
Asia-Pacific:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
EMEA:
Tel: +36 88 520 390
Fax: +36 88 520 211
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com
14.4
MAX.
(0.567)
3,000
REV. 03/15
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.