PL IA N T Features This model is currently available, but not recommended for new designs. M ■ Four unidirectional ESD protections *R oH S CO ■ RoHS compliant* ■ Low capacitance ■ Surge protection CDSOT353-T05 - TVS Diode Quad Array General Information The CDSOT353-T05 device provides ESD, EFT and Surge protection for high speed data ports meeting IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. The Transient Voltage Suppressor array offers a Working Peak Reverse Voltage of 5.0 V and Minimum Breakdown Voltage of 6.0 V. I/O 1 I/O 4 GND The SOT353 packaged device will mount directly onto the industry standard SOT353 footprint. Bourns® Chip Diodes are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. I/O 2 I/O 3 Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol CDSOT353-T05 Unit Peak Pulse Power (tp = 8/20 µs) (NOTE 1) PPK 25 W Storage Temperature TSTG -55 to +150 ºC Operating Temperature TOPR -55 to +125 ºC Minimum Breakdown Voltage @ 1 mA VBR 6.0 V Working Peak Voltage VM 5.0 V Maximum Clamping Voltage @ IP = 2 A VP 13 V Maximum Leakage Current @ 3 V IL 1 µA Typical Capacitance 2.5 V @ 1 MHz C 9.5 pF Notes: 1. See Peak Pulse Power vs. Pulse Time. Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Applications ■ High speed data ports ■ Mobile phones & accessories ■ Video/graphics cards ■ Set top boxes ■ Communication systems CDSOT353-T05 - TVS Diode Quad Array Product Dimensions Recommended Footprint This is an RoHS compliant molded SOT353 package with 100 % Matte Sn on the lead frame. It weighs approximately 15 mg and has a flammability rating of UL 94V-0. 2.65 (.104) 2.40 (.094) 1.30 (.051) G A 1 2.10 (.083) F D I 0.90 (.035) I 5 0.50 (.020) 4 PLCS. 2 2.35 (.093) 0.40 (.016) H 3 4 E 0.55 (.022) 5 PLCS. Q1 C B Typical Part Marking MM (INCHES) DIMENSIONS: CDSOT353-T05............................................................................ D5 How to Order Dimension Min. Max. A 0.80 (0.031) 1.10 (0.043) B 0.15 (0.006) 0.30 (0.012) C 0.10 (0.004) 0.18 (0.007) Model T = Transient Voltage Suppressor D 1.80 (0.071) 2.20 (0.087) Working Peak Reverse Voltage 05 = 5 VRWM (Volts) E 1.15 (0.045) 1.35 (0.053) F - 0.10 (0.004) G 0.80 (0.031) 1.00 (0.039) H 1.80 (0.071) 2.40 (0.094) Common Diode Chip Diode Package SOT353 = SOT353 Package 0.65 TYP. (0.026) I Q1 CD SOT353 - T 05 0.10 (0.004) 0.40 (0.016) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CDSOT353-T05 - TVS Diode Quad Array Rating & Characteristic Curves Non-Repetitive Peak Pulse Power vs. Pulse Time Pulse Waveform TJ = 25 °C, tp (μs) = 8/20 μs exponentially decay waveform IPP – Peak Pulse Current (% of IPP) PPP – Peak Pulse Power (W) 1000 100 10 1 10 1 100 1000 120 tt = 8 μs td = 20 μs 80 et 60 40 Td = t|Ipp/2 20 0 0 10000 Test Waveform Parameters tt 100 5 10 15 20 25 30 t – Time (µs) td – Pulse Duration (µs) Peak Pulse Power vs. Junction Temperature Typical Junction Capacitance 1.2 12 0.8 Capacitance (pF) Ppp / Ppp (25 °C) 10 0.4 8 6 4 2 0 TJ=25 °C, f=1 MHz, Vosc=1 V 0 0 50 100 150 Junction Temperature (°C) 200 6 1 2 Reverse Voltage (V) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3 4 CDSOT353-T05 - TVS Diode Quad Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Direction of Feed Item Symbol CDSOT353 Carrier Width A 2.25 ± 0.10 (0.088 ± 0.004) Carrier Length B 2.34 ± 0.10 (0.092 ± 0.004) Carrier Depth C 1.22 ± 0.10 (0.048 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 50.0 MIN. (1.969) Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 3.50 ± 0.05 (0.138 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 8.00 ± 0.20 (0.315 ± 0.008) Reel Width W1 Quantity per Reel MM (INCHES) -- 14.4 MAX. (0.567) 3000 Devices are packed in accordance with EIA standard RS-481-A. REV. 07/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.